In MSYS2, we have two Python interpreters at our disposal, so we can
include the Python stuff in the build.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch teaches `git clean` to respect NTFS junctions and Unix
bind mounts: it will now stop at those boundaries.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch allows us to specify absolute paths without the drive
prefix e.g. when cloning.
Example:
C:\Users\me> git clone https://github.com/git/git \upstream-git
This will clone into a new directory C:\upstream-git, in line with how
Windows interprets absolute paths.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These fixes were necessary for Sverre Rabbelier's remote-hg to work,
but for some magic reason they are not necessary for the current
remote-hg. Makes you wonder how that one gets away with it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Backport a couple fixes to make the CI build run again (so much for
reproducible builds...).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
While Git for Windows does not _ship_ Python (in order to save on
bandwidth), MSYS2 provides very fine Python interpreters that users can
easily take advantage of, by using Git for Windows within its SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Windows' equivalent to "bind mounts", NTFS junction points, can be
unlinked without affecting the mount target. This is clearly what users
expect to happen when they call `git clean -dfx` in a worktree that
contains NTFS junction points: the junction should be removed, and the
target directory of said junction should be left alone (unless it is
inside the worktree).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When specifying an absolute path without a drive prefix, we convert that
path internally. Let's make sure that we handle that case properly, too
;-)
This fixes the command
git clone https://github.com/git-for-windows/git \G4W
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It seems to be not exactly rare on Windows to install NTFS junction
points (the equivalent of "bind mounts" on Linux/Unix) in worktrees,
e.g. to map some development tools into a subdirectory.
In such a scenario, it is pretty horrible if `git clean -dfx` traverses
into the mapped directory and starts to "clean up".
Let's just not do that. Let's make sure before we traverse into a
directory that it is not a mount point (or junction).
This addresses https://github.com/git-for-windows/git/issues/607
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, there are several categories of absolute paths. One such
category starts with a backslash and is implicitly relative to the
drive associated with the current working directory. Example:
c:
git clone https://github.com/git-for-windows/git \G4W
should clone into C:\G4W.
There is currently a problem with that, in that mingw_mktemp() does not
expect the _wmktemp() function to prefix the absolute path with the
drive prefix, and as a consequence, the resulting path does not fit into
the originally-passed string buffer. The symptom is a "Result too large"
error.
Reported by Juan Carlos Arevalo Baeza.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
After importing anything with fast-import, we should always let the
garbage collector do its job, since the objects are written to disk
inefficiently.
This brings down an initial import of http://selenic.com/hg from about
230 megabytes to about 14.
In the future, we may want to make this configurable on a per-remote
basis, or maybe teach fast-import about it in the first place.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These fixes have been sent to the Git mailing list but have not been
picked up by the Git project yet.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Now that we dropped `contrib/buildsystems/generate` to generate Visual
Studio Solution files, it is time to also drop the `vcxproj` Makefile
target that depended on that script.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In some implementations, `regexec_buf()` assumes that it is fed lines;
Without `REG_NOTEOL` it thinks the end of the buffer is the end of a
line. Which makes sense, but trips up this case because we are not
feeding lines, but rather a whole buffer. So the final newline is not
the start of an empty line, but the true end of the buffer.
This causes an interesting bug:
$ echo content >file.txt
$ git grep --no-index -n '^$' file.txt
file.txt:2:
This bug is fixed by making the end of the buffer consistently the end
of the final line.
The patch was applied from
https://lore.kernel.org/git/20250113062601.GD767856@coredump.intra.peff.net/
Reported-by: Olly Betts <olly@survex.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Before we had CMake support, the only way to build Git in Visual Studio
was via this hacky `generate` script.
For a while I tried to fix whenever things got broken, in particular to
allow building confidence in embargoed releases by running the CI builds
in Azure Pipelines in a private Azure DevOps project. I even carried the
patches in Git for Windows with the intention of upstreaming them,
eventually.
However, it is a lot of work with too little benefit. CMake is much
better supported by Visual Studio. So let's drop this hacky script (plus
support code).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It is not useful because we do not have any persisted directory anymore,
not since dropping our Travis CI support.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This happens only when the corresponding commits are not exported in
the current fast-export run. This can happen either when the relevant
commit is already marked, or when the commit is explicitly marked
as UNINTERESTING with a negative ref by another argument.
This breaks fast-export basec remote helpers.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
This addresses:
- CVE-2024-52005:
Insufficient neutralization of ANSI escape sequences in sideband
payload can be used to mislead Git users into believing that
certain remote-generated messages actually originate from Git.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
When a Unix socket is initialized, the current directory's path is
stored so that the cleanup code can `chdir()` back to where it was
before exit.
If the path that needs to be stored exceeds the default size of the
`sun_path` attribute of `struct sockaddr_un` (which is defined as a
108-sized byte array on Linux), a larger buffer needs to be allocated so
that it can hold the path, and it is the responsibility of the
`unix_sockaddr_cleanup()` function to release that allocated memory.
In Git's CI, this stack allocation is not necessary because the code is
checked out to `/home/runner/work/git/git`. Concatenate the path
`t/trash directory.t0301-credential-cache/.cache/git/credential/socket`
and a terminating NUL, and you end up with 96 bytes, 12 shy of the
default `sun_path` size.
However, I use worktrees with slightly longer paths:
`/home/me/projects/git/yes/i/nest/worktrees/to/organize/them/` is more
in line with what I have. When I recently tried to locally reproduce a
failure of the `linux-leaks` CI job, this t0301 test failed (where it
had not failed in CI).
The reason: When `credential-cache` tries to reach its daemon initially
by calling `unix_sockaddr_init()`, it is expected that the daemon cannot
be reached (the idea is to spin up the daemon in that case and try
again). However, when this first call to `unix_sockaddr_init()` fails,
the code returns early from the `unix_stream_connect()` function
_without_ giving the cleanup code a chance to run, skipping the
deallocation of above-mentioned path.
The fix is easy: do not return early but instead go directly to the
cleanup code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The preceding two commits introduced special handling of the sideband
channel to neutralize ANSI escape sequences before sending the payload
to the terminal, and `sideband.allowControlCharacters` to override that
behavior.
However, some `pre-receive` hooks that are actively used in practice
want to color their messages and therefore rely on the fact that Git
passes them through to the terminal.
In contrast to other ANSI escape sequences, it is highly unlikely that
coloring sequences can be essential tools in attack vectors that mislead
Git users e.g. by hiding crucial information.
Therefore we can have both: Continue to allow ANSI coloring sequences to
be passed to the terminal, and neutralize all other ANSI escape
sequences.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The preceding commit fixed the vulnerability whereas sideband messages
(that are under the control of the remote server) could contain ANSI
escape sequences that would be sent to the terminal verbatim.
However, this fix may not be desirable under all circumstances, e.g.
when remote servers deliberately add coloring to their messages to
increase their urgency.
To help with those use cases, give users a way to opt-out of the
protections: `sideband.allowControlCharacters`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The output of `git clone` is a vital component for understanding what
has happened when things go wrong. However, these logs are partially
under the control of the remote server (via the "sideband", which
typically contains what the remote `git pack-objects` process sends to
`stderr`), and is currently not sanitized by Git.
This makes Git susceptible to ANSI escape sequence injection (see
CWE-150, https://cwe.mitre.org/data/definitions/150.html), which allows
attackers to corrupt terminal state, to hide information, and even to
insert characters into the input buffer (i.e. as if the user had typed
those characters).
To plug this vulnerability, disallow any control character in the
sideband, replacing them instead with the common `^<letter/symbol>`
(e.g. `^[` for `\x1b`, `^A` for `\x01`).
There is likely a need for more fine-grained controls instead of using a
"heavy hammer" like this, which will be introduced subsequently.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
"git version --build-options" stopped showing zlib version by
mistake due to recent refactoring, which has been corrected.
* tc/zlib-ng-fix:
help: print zlib-ng version number
help: include git-zlib.h to print zlib version
This is the recommended way on GitHub to describe policies revolving around
security issues and about supported versions.
Helped-by: Sven Strickroth <email@cs-ware.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows accepts pull requests; Core Git does not. Therefore we
need to adjust the template (because it only matches core Git's
project management style, not ours).
Also: direct Git for Windows enhancements to their contributions page,
space out the text for easy reading, and clarify that the mailing list
is plain text, not HTML.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Originally introduced as `core.useBuiltinFSMonitor` in Git for Windows
and developed, improved and stabilized there, the built-in FSMonitor
only made it into upstream Git (after unnecessarily long hemming and
hawing and throwing overly perfectionist style review sticks into the
spokes) as `core.fsmonitor = true`.
In Git for Windows, with this topic branch, we re-introduce the
now-obsolete config setting, with warnings suggesting to existing users
how to switch to the new config setting, with the intention to
ultimately drop the patch at some stage.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch re-adds the deprecated --stdin/-z options to `git
reset`. Those patches were overridden by a different set of options in
the upstream Git project before we could propose `--stdin`.
We offered this in MinGit to applications that wanted a safer way to
pass lots of pathspecs to Git, and these applications will need to be
adjusted.
Instead of `--stdin`, `--pathspec-from-file=-` should be used, and
instead of `-z`, `--pathspec-file-nul`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A fix for calling `vim` in Windows Terminal caused a regression and was
reverted. We partially un-revert this, to get the fix again.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
