home-assistant.io/source/_components/rejseplanen.markdown

layout, title, description, date, sidebar, comments, sharing, footer, logo, ha_category, ha_iot_class, ha_release, redirect_from

layout	title	description	date	sidebar	comments	sharing	footer	logo	ha_category	ha_iot_class	ha_release	redirect_from
page	Rejseplanen Public Transport	Instructions on how to integrate timetable data for Danish Rejseplanen within Home Assistant.	2019-01-09 08:52	true	false	true	true	rejseplanen.png	Transport	Cloud Polling	0.88	/components/sensor.rejseplanen/

The rejseplanen sensor will provide you with travel details for Danish public transport, using timetable data from Rejseplanen.

{% linkable_title Setup %}

The stop_id can be obtained through the following steps:

If you know the exact name of the stop you can search the stop_id with the following url http://xmlopen.rejseplanen.dk/bin/rest.exe/location?format=json&input=STOP_NAME and put in the name of the stop instead of "STOP_NAME" in the end of the url.

If you don't know the name of the stop follow this guide:

• Go to https://www.openstreetmap.org
• Make a search and fill in the location you want to find for.
• The url will look like this https://www.openstreetmap.org/#map=18/56.15756/10.20674
• Now insert the coordinates for the location in the url, in this example it will be: http://xmlopen.rejseplanen.dk/bin/rest.exe/stopsNearby?coordX=56.15756&coordY=10.20674&
• You will now see the 30 stops closest to your location.

You will se a output like this:

"StopLocation":[{
    "name":"Engdalsvej/Århusvej (Favrskov Kom)",
    "x":"10078598",
    "y":"56243456",
    "id":"713000702"

Find the name of your stop in the list and the "id" is the one you are looking for to us as value for stop_id:.

{% linkable_title Configuration %}

Add a sensor to your configuration.yaml file as shown in the example:

# Example configuration.yaml entry
sensor:
  - platform: rejseplanen
    stop_id: 'YOUR_STOP_ID'

{% configuration %} stop_id: description: The ID of the public transport stop. required: true type: string route: description: List of route names. required: false type: string|list direction: description: List of directions to filter by. required: false type: string|list departure_type: description: List of departure types to filter by. required: false type: string|list {% endconfiguration %}

{% linkable_title Direction %}

If you use the direction filter it's important to put correct destination or else the sensor will not work at all. The direction has to be the destination(s) for the transport type(s) for the departure stop destination, and NOT the stop where you want to get off. Check http://rejseplanen.dk, make a search and use the destinations from there in your configuration. Make sure you use the exact name as the destination(s).

A working example on how to use this sensor with direction:

# Example configuration.yaml entry with the correct use of direction.
sensor:
  - platform: rejseplanen
    stop_id: '008600615'
    direction:
      - 'CPH Lufthavn'
      - 'Helsingør St.'

A NOT WORKING example use this sensor with direction:

# Example configuration.yaml entry with the correct use of direction.
sensor:
  - platform: rejseplanen
    stop_id: '008600615'
    direction:
      - 'København H'

It fails because the destination from the departure is NOT København H, but 'CPH Lufthavn', 'Helsingør St.' and others.

{% linkable_title Examples %}

A more extensive example on how to use this sensor:

# Example configuration.yaml entry
sensor:
  - platform: rejseplanen
    stop_id: '000045740'
    route: 'Bus 350S'
    direction:
      - 'Herlev St.'
      - 'Ballerup St.'

The sensor can filter the timetables by one or more routes, directions and types. The known types are listed in the table below.

Departure type	Description
BUS	Normal bus
EXB	Express bus
LET	Letbanen
M	Metro
S	S-train
REG	Regional train