home-assistant.io/source/_integrations/inels.markdown

title, description, ha_category, ha_release, ha_iot_class, ha_config_flow, ha_codeowners, ha_domain, ha_platforms, ha_integration_type, ha_quality_scale

title	description	ha_category	ha_release	ha_iot_class	ha_config_flow	ha_codeowners	ha_domain	ha_platforms	ha_integration_type	ha_quality_scale
iNELS	Instructions on how to integrate iNELS with Home Assistant.	Switch	2025.11	Local Push	true	@epdevlab	inels	switch	integration	bronze

The iNELS {% term integration %} allows you to control and monitor the devices connected to your control units (BUS or eLAN).

There is currently support for the following device types within Home Assistant:

• Switch

Prerequisites

• MQTT broker.
• eLAN devices flashed with version mqtt_1.0 or later.
• BUS devices flashed with version mqtt_1.0 or later.
• See the Wiki page for instructions on how to configure the control units.

{% include integrations/config_flow.md %}

Removing the integration

This integration follows standard integration removal.

{% include integrations/remove_device_service.md %}

To remove a setting from eLANRF

1. Launch the IDM application.
2. Select Configuration of the central unit from the menu.
3. Select MQTT settings then choose Not Connect in the mode options and click Save to CU.

To remove a setting from CU3

1. Open the eLANRF web interface.
2. Go to Settings and disable MQTT under MQTT connection.