title, description, ha_category, ha_release, ha_iot_class, ha_config_flow, ha_codeowners, ha_domain, ha_zeroconf, ha_platforms, ha_integration_type
| title |
description |
ha_category |
ha_release |
ha_iot_class |
ha_config_flow |
ha_codeowners |
ha_domain |
ha_zeroconf |
ha_platforms |
ha_integration_type |
| Lektrico Charging Station |
Instructions on how to integrate a Lektrico Chargering Station with Home Assistant. |
|
2024.10 |
Local Polling |
true |
|
lektrico |
true |
| binary_sensor |
| button |
| number |
| select |
| sensor |
| switch |
|
device |
The Lektrico Charging Station integration integrates your Lektrico Charging Station into your Home Assistant and allows you to monitor it.
The Lektrico Charging Station device will be added as a sensor in Home Assistant.
{% include integrations/config_flow.md %}
Binary sensors
Binary sensors available in the library:
Chargers
| Condition |
Description |
| state_e_activated |
Electric vehicle error |
| overtemp |
Overtemperature |
| critical_temp |
Critical temperature |
| overcurrent |
Overcurrent |
| meter_fault |
Meter fault |
| undervoltage |
Undervoltage |
| overvoltage |
Overvoltage |
| rcd_error |
RCD error |
| cp_diode_failure |
Electric vehicle communication error |
| contactor_failure |
Contactor failure |
Sensors
Sensors available in the library:
Single-phase charger
| Condition |
Unit |
Description |
| state |
|
State of the charger. |
| charging_time |
s |
Indicates the current session charging time. |
| power |
kW |
Current instant power. |
| energy |
kWh |
Total charged energy for the current charging session. |
| temperature |
°C |
Board temperature. |
| lifetime_energy |
kWh |
Total charged energy since installation. |
| installation_current |
A |
Current value [A] to be limited by software. |
| limit_reason |
|
Current limit reason. |
| voltage |
V |
Measured voltage. |
| current |
A |
Measured current. |
Three-phase charger
| Condition |
Unit |
Description |
| state |
|
State of the charger. |
| charging_time |
s |
Indicates the current session charging time. |
| power |
kW |
Current instant power. |
| energy |
kWh |
Total charged energy for the current charging session. |
| temperature |
°C |
Board temperature. |
| lifetime_energy |
kWh |
Total charged energy since installation. |
| installation_current |
A |
Current value [A] to be limited by software. |
| limit_reason |
|
Current limit reason. |
| voltage_l1 |
V |
Measured voltage on L1. |
| voltage_l2 |
V |
Measured voltage on L2. |
| voltage_l3 |
V |
Measured voltage on L3. |
| current_l1 |
A |
Measured current on L1. |
| current_l2 |
A |
Measured current on L2. |
| current_l3 |
A |
Measured current on L3. |
Single-phase energy meter
| Condition |
Unit |
Description |
| breaker_current |
A |
Main breaker current. |
| power |
kW |
Measured active power. |
| pf |
|
Power factor. |
Three-phase energy meter
| Condition |
Unit |
Description |
| breaker_current |
A |
Main breaker current. |
| power_l1 |
kW |
Measured active power on L1. |
| power_l2 |
kW |
Measured active power on L2. |
| power_l3 |
kW |
Measured active power on L3. |
| pf_l1 |
|
Power factor on L1. |
| pf_l2 |
|
Power factor on L2. |
| pf_l3 |
|
Power factor on L3. |
Buttons
Buttons available in the library:
Chargers
| Button |
Description |
| charge_start |
Command charger to start charging. |
| charge_stop |
Command charger to stop charging. |
| charging_schedule_override |
Command charger to override the charging schedule for the next charging session. |
| reboot |
Reboot charger. |
Energy meters
| Button |
Description |
| reboot |
Reboot energy meter. |
Numbers
Numbers available in the library:
Chargers
| Number |
Unit |
Range |
Description |
| led_max_brightness |
% |
0 - 100 |
Set the LED brightness of the charger. |
| dynamic_limit |
A |
0 - 32 |
Set the maximum allowed charging current. |
Selects
Selects available in the library:
Energy meters
| Select |
Description |
| lb_mode |
Select the load balancing mode of the energy meter. The options are Disabled, Power, Hybrid, and Green. |
Switches
Switches available in the library:
Single-phase charger
| Switch |
Description |
| authentication |
Allows to select if the charger will automatically start to charge or if it needs authentication. |
| lock |
Allows to select if the charger is locked or not. When the charger is locked, no charging is possible. |
Three-phase charger
| Switch |
Description |
| authentication |
Allows to select if the charger will automatically start to charge or if it needs authentication. |
| lock |
Allows to select if the charger is locked or not. When the charger is locked, no charging is possible. |
| force_single_phase |
Allows to put the three-phase charger in single-phase mode or three-phase mode. |
