home-assistant.io/source/_integrations/sleepiq.markdown

title, description, ha_category, ha_release, ha_iot_class, ha_domain, ha_config_flow, ha_dhcp, ha_codeowners, ha_platforms, ha_integration_type

title	description	ha_category	ha_release	ha_iot_class	ha_domain	ha_config_flow	ha_dhcp	ha_codeowners	ha_platforms	ha_integration_type
SleepIQ	Instructions for how to integrate SleepIQ beds within Home Assistant.	Binary sensor Button Health Light Number Select Sensor Switch	0.29	Cloud Polling	sleepiq	true	true	@mfugate1 @kbickar	binary_sensor button light number select sensor switch	integration

The SleepIQ {% term integration %} lets you integrate your SleepNumber Bed via SleepIQ by SleepNumber.

Prerequisites

You will need an account on SleepIQ to use this integration.

{% include integrations/config_flow.md %}

Supported device types

There is currently support available for the following platforms within Home Assistant, depending on the bed's capabilities:

• Binary sensor - View occupancy of each side
• Button - Calibrate the bed
• Button - Stop the pump
• Light - Control lights on supported models
• Number - View/Set the actuator positions of the foundation
• Number - View/Set firmness for each side
• Select - Choose a foundation preset position
• Select/Number - Set a foot warmer mode and timeout
• Select/Number - Set core climate heat/cool modes and timeout
• Sensor - View pressure of each side
• Switch - Toggle Privacy mode

Notes

• If you are using a DNS-based ad-blocker such as Pi-hole, you may need to disable it temporarily while configuring this item in Home Assistant.
• The Sleep Number bed communicates with endpoints on sleepnumber.com as well as the AWS Firehose data collection service at firehose.us-east-1.amazonaws.com.