Back when the FSCache was invented, there was no way to ask Windows to
store filenames case-sensitively. Also, `fspathcmp()` had not been
invented yet, so we simply used `strnicmp()` to compare the filenames in
the FSCache.
In the meantime, much has changed.
Let's use `fspathncmp()` instead, and benefit from case-sensitive file
names as configured.
Note: to make use of this, users _must_ call `fsutil.exe file
setCaseSensitiveInfo .` in an empty directory _before_ calling `git
init` to allow Git to detect that filenames are stored case-sensitively.
This fixes https://github.com/git-for-windows/git/issues/3686
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Since df3458e957 (refs API: make parse_loose_ref_contents() not set
errno, 2021-10-16), `files_read_raw_ref()` assumes that `errno` is
always set to a non-zero value upon failure. It even goes so far as to
hard-code that assumption in a `BUG()` when that assumption is not met,
rather than fail gracefully.
According to
https://pubs.opengroup.org/onlinepubs/9699919799/functions/lstat.html,
`lstat()` shall indeed set `errno` upon failure, and
https://pubs.opengroup.org/onlinepubs/9699919799/functions/errno.html
indicates that indeed, the code may rely on `errno` being set to a
non-zero value upon failure.
In `fscache_lstat()`, we did not set `errno` upon a cache miss (which
indicates that the item did not exist at the time the `lstat()` values
were cached), and therefore we now trigger this problem all the time.
Let's set `errno=ENOENT` when no entry was found.
This fixes https://github.com/git-for-windows/git/issues/3674
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Previously, we interpolated paths in config variables that start with a
forward-slash as relative to the runtime prefix. This was not portable
and has been replaced with `%(prefix)/`.
Let's warn users when they use the now-deprecated form.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch re-adds the deprecated --stdin/-z options to `git
reset`. Those patches were overridden by a different set of options in
the upstream Git project before we could propose `--stdin`.
We offered this in MinGit to applications that wanted a safer way to
pass lots of pathspecs to Git, and these applications will need to be
adjusted.
Instead of `--stdin`, `--pathspec-from-file=-` should be used, and
instead of `-z`, `--pathspec-file-nul`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This branch allows third-party tools to call `git status
--no-lock-index` to avoid lock contention with the interactive Git usage
of the actual human user.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A fix for calling `vim` in Windows Terminal caused a regression and was
reverted. We partially un-revert this, to get the fix again.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These are Git for Windows' Git GUI and gitk patches. We will have to
decide at some point what to do about them, but that's a little lower
priority (as Git GUI seems to be unmaintained for the time being, and
the gitk maintainer keeps a very low profile on the Git mailing list,
too).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is the recommended way on GitHub to describe policies revolving around
security issues and about supported versions.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Rather than using private IFTTT Applets that send mails to this
maintainer whenever a new version of a Git for Windows component was
released, let's use the power of GitHub workflows to make this process
publicly visible.
This workflow monitors the Atom/RSS feeds, and opens a ticket whenever a
new version was released.
Note: Bash sometimes releases multiple patched versions within a few
minutes of each other (i.e. 5.1p1 through 5.1p4, 5.0p15 and 5.0p16). The
MSYS2 runtime also has a similar system. We can address those patches as
a group, so we shouldn't get multiple issues about them.
Note further: We're not acting on newlib releases, OpenSSL alphas, Perl
release candidates or non-stable Perl releases. There's no need to open
issues about them.
Co-authored-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, an absolute POSIX path needs to be turned into a Windows
one. We used to interpret paths starting with a single `/` as relative
to the runtime-prefix, but now these need to be prefixed with
`%(prefix)/`. Let's warn for now, but still handle it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git documentation refers to $HOME and $XDG_CONFIG_HOME often, but does not specify how or where these values come from on Windows where neither is set by default. The new documentation reflects the behavior of setup_windows_environment() in compat/mingw.c.
Signed-off-by: Alejandro Barreto <alejandro.barreto@ni.com>
Git for Windows accepts pull requests; Core Git does not. Therefore we
need to adjust the template (because it only matches core Git's
project management style, not ours).
Also: direct Git for Windows enhancements to their contributions page,
space out the text for easy reading, and clarify that the mailing list
is plain text, not HTML.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Getting started contributing to Git can be difficult on a Windows
machine. CONTRIBUTING.md contains a guide to getting started, including
detailed steps for setting up build tools, running tests, and
submitting patches to upstream.
[includes an example by Pratik Karki how to submit v2, v3, v4, etc.]
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
The Git project followed suite and added their Code of Conduct, based on
the Contributors' Covenant v1.4.
We edit it slightly to reflect Git for Windows' particulars.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The `--stdin` option was a well-established paradigm in other commands,
therefore we implemented it in `git reset` for use by Visual Studio.
Unfortunately, upstream Git decided that it is time to introduce
`--pathspec-from-file` instead.
To keep backwards-compatibility for some grace period, we therefore
reinstate the `--stdin` option on top of the `--pathspec-from-file`
option, but mark it firmly as deprecated.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It was a bad idea to just remove that option from Git for Windows
v2.15.0, as early users of that (still experimental) option would have
been puzzled what they are supposed to do now.
So let's reintroduce the flag, but make sure to show the user good
advice how to fix this going forward.
We'll remove this option in a more orderly fashion when we're certain
that the option is no longer used (previous Visual Studio versions
relied on it).
The option is deprecated now, therefore we make sure that keeps saying
so until we finally remove it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When a third-party tool periodically runs `git status` in order to keep
track of the state of the working tree, it is a bad idea to lock the
index: it might interfere with interactive commands executed by the
user, e.g. when the user wants to commit files.
Git for Windows introduced the `--no-lock-index` option a long time ago
to fix that (it made it into Git for Windows v2.9.2(3)) by simply
avoiding to write that file.
The downside is that the periodic `git status` calls will be a little
bit more wasteful because they may have to refresh the index repeatedly,
only to throw away the updates when it exits. This cannot really be
helped, though, as tools wanting to get a periodic update of the status
have no way to predict when the user may want to lock the index herself.
Sadly, a competing approach was submitted (by somebody who apparently
has less work on their plate than this maintainer) that made it into
v2.15.0 but is *different*: instead of a `git status`-only option, it is
an option that comes *before* the Git command and is called differently,
too.
Let's give previous users a chance to upgrade to newer Git for Windows
versions by handling the `--no-lock-index` option, still, though with a
big fat warning.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We need to trim \r from the output of 'ssh-keygen -Y find-principals' on
Windows, or we end up calling 'ssh-keygen -Y verify' with a bogus signer
identity. ssh-keygen.c:2841 contains a call to puts(3), which confirms this
hypothesis. Signature verification passes with the fix.
Signed-off-by: pedro martelletto <pedro@yubico.com>
In e3f7e01b50 (Revert "editor: save and reset terminal after calling
EDITOR", 2021-11-22), we reverted the commit wholesale where the
terminal state would be saved and restored before/after calling an
editor.
The reverted commit was intended to fix a problem with Windows Terminal
where simply calling `vi` would cause problems afterwards.
To fix the problem addressed by the revert, but _still_ keep the problem
with Windows Terminal fixed, let's revert the revert, with a twist: we
restrict the save/restore _specifically_ to the case where `vi` (or
`vim`) is called, and do not do the same for any other editor.
This should still catch the majority of the cases, and will bridge the
time until the original patch is re-done in a way that addresses all
concerns.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Now that we have a `batch` mode, let's be explicit.
This is a follow-up to ce4786fc77 (mingw: change core.fsyncObjectFiles
= 1 by default, 2017-09-04) and will most likely have to be squashed
into it before upstreaming that patch (after the `batch` fsync mode was
upstreamed).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This merges the topic branch (specifically backported onto v2.33.1 to
allow for integrating into Git for Windows' `main` branch) that strikes
a better balance between safety and speed: rather than `fsync()`ing each
and every loose object file, we now offer to do it in a batch.
This will become the new default in Git for Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The `xutftowcs_path` function canonicalizes absolute paths using GetFullPathNameW.
This canonicalization may change the length of the string (e.g. getting rid of \.\),
which breaks callers that pass the template string in a strbuf and expect the
length of the string to remain the same.
In my particular case, the tmp-objdir code is passing a strbuf to mkdtemp and is
breaking since the strbuf.len is no longer synchronized with strlen(strbuf.buf).
Signed-off-by: Neeraj K. Singh <neerajsi@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Add a basic performance test for "git add" and "git stash" of a lot of
new objects with various fsync settings.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test cases to exercise batch mode for:
* 'git add'
* 'git stash'
* 'git update-index'
* 'git unpack-objects'
These tests ensure that the added data winds up in the object database.
In this change we introduce a new test helper lib-unique-files.sh. The
goal of this library is to create a tree of files that have different
oids from any other files that may have been created in the current test
repo. This helps us avoid missing validation of an object being added due
to it already being in the repo.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unpack-objects functionality is used by fetch, push, and fast-import
to turn the transfered data into object database entries when there are
fewer objects than the 'unpacklimit' setting.
By enabling bulk-checkin when unpacking objects, we can take advantage
of batched fsyncs.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The update-index functionality is used internally by 'git stash push' to
setup the internal stashed commit.
This change enables bulk-checkin for update-index infrastructure to
speed up adding new objects to the object database by leveraging the
pack functionality and the new bulk-fsync functionality.
There is some risk with this change, since under batch fsync, the object
files will not be available until the update-index is entirely complete.
This usage is unlikely, since any tool invoking update-index and
expecting to see objects would have to synchronize with the update-index
process after passing it a file path.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds a win32 implementation for fsync_no_flush that is
called git_fsync. The 'NtFlushBuffersFileEx' function being called is
available since Windows 8. If the function is not available, we
return -1 and Git falls back to doing a full fsync.
The operating system is told to flush data only without a hardware
flush primitive. A later full fsync will cause the metadata log
to be flushed and then the disk cache to be flushed on NTFS and
ReFS. Other filesystems will treat this as a full flush operation.
I added a new file here for this system call so as not to conflict with
downstream changes in the git-for-windows repository related to fscache.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When adding many objects to a repo with core.fsyncObjectFiles set to
true, the cost of fsync'ing each object file can become prohibitive.
One major source of the cost of fsync is the implied flush of the
hardware writeback cache within the disk drive. Fortunately, Windows,
and macOS offer mechanisms to write data from the filesystem page cache
without initiating a hardware flush. Linux has the sync_file_range API,
which issues a pagecache writeback request reliably after version 5.2.
This patch introduces a new 'core.fsyncObjectFiles = batch' option that
batches up hardware flushes. It hooks into the bulk-checkin plugging and
unplugging functionality and takes advantage of tmp-objdir.
When the new mode is enabled do the following for each new object:
1. Create the object in a tmp-objdir.
2. Issue a pagecache writeback request and wait for it to complete.
At the end of the entire transaction when unplugging bulk checkin:
1. Issue an fsync against a dummy file to flush the hardware writeback
cache, which should by now have processed the tmp-objdir writes.
2. Rename all of the tmp-objdir files to their final names.
3. When updating the index and/or refs, we assume that Git will issue
another fsync internal to that operation. This is not the case today,
but may be a good extension to those components.
On a filesystem with a singular journal that is updated during name
operations (e.g. create, link, rename, etc), such as NTFS, HFS+, or XFS
we would expect the fsync to trigger a journal writeout so that this
sequence is enough to ensure that the user's data is durable by the time
the git command returns.
This change also updates the macOS code to trigger a real hardware flush
via fnctl(fd, F_FULLFSYNC) when fsync_or_die is called. Previously, on
macOS there was no guarantee of durability since a simple fsync(2) call
does not flush any hardware caches.
_Performance numbers_:
Linux - Hyper-V VM running Kernel 5.11 (Ubuntu 20.04) on a fast SSD.
Mac - macOS 11.5.1 running on a Mac mini on a 1TB Apple SSD.
Windows - Same host as Linux, a preview version of Windows 11.
This number is from a patch later in the series.
Adding 500 files to the repo with 'git add' Times reported in seconds.
core.fsyncObjectFiles | Linux | Mac | Windows
----------------------|-------|-------|--------
false | 0.06 | 0.35 | 0.61
true | 1.88 | 11.18 | 2.47
batch | 0.15 | 0.41 | 1.53
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we did not install any handler for Ctrl+C, but now we really
want to because the MSYS2 runtime learned the trick to call the
ConsoleCtrlHandler when Ctrl+C was pressed.
With this, hitting Ctrl+C while `git log` is running will only terminate
the Git process, but not the pager. This finally matches the behavior on
Linux and on macOS.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The Makefile target `install-mingit-test-artifacts` simply copies stuff
and things directly into a MinGit directory, including an init.bat
script to set everything up so that the tests can be run in a cmd
window.
Sadly, Git's test suite still relies on a Perl interpreter even if
compiled with NO_PERL=YesPlease. We punt for now, installing a small
script into /usr/bin/perl that hands off to an existing Perl of a Git
for Windows SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Preparation for adding bulk-fsync to the bulk-checkin.c infrastructure.
* Rename 'state' variable to 'bulk_checkin_state', since we will later
be adding 'bulk_fsync_state'. This also makes the variable easier to
find in the debugger, since the name is more unique.
* Move the 'plugged' data member of 'bulk_checkin_state' into a separate
static variable. Doing this avoids resetting the variable in
finish_bulk_checkin when zeroing the 'bulk_checkin_state'. As-is, we
seem to unintentionally disable the plugging functionality the first
time a new packfile must be created due to packfile size limits. While
disabling the plugging state only results in suboptimal behavior for
the current code, it would be fatal for the bulk-fsync functionality
later in this patch series.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The TerminateProcess() function does not actually leave the child
processes any chance to perform any cleanup operations. This is bad
insofar as Git itself expects its signal handlers to run.
A symptom is e.g. a left-behind .lock file that would not be left behind
if the same operation was run, say, on Linux.
To remedy this situation, we use an obscure trick: we inject a thread
into the process that needs to be killed and to let that thread run the
ExitProcess() function with the desired exit status. Thanks J Wyman for
describing this trick.
The advantage is that the ExitProcess() function lets the atexit
handlers run. While this is still different from what Git expects (i.e.
running a signal handler), in practice Git sets up signal handlers and
atexit handlers that call the same code to clean up after itself.
In case that the gentle method to terminate the process failed, we still
fall back to calling TerminateProcess(), but in that case we now also
make sure that processes spawned by the spawned process are terminated;
TerminateProcess() does not give the spawned process a chance to do so
itself.
Please note that this change only affects how Git for Windows tries to
terminate processes spawned by Git's own executables. Third-party
software that *calls* Git and wants to terminate it *still* need to make
sure to imitate this gentle method, otherwise this patch will not have
any effect.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
