If multiple threads access a directory that is not yet in the cache, the
directory will be loaded by each thread. Only one of the results is added
to the cache, all others are leaked. This wastes performance and memory.
On cache miss, add a future object to the cache to indicate that the
directory is currently being loaded. Subsequent threads register themselves
with the future object and wait. When the first thread has loaded the
directory, it replaces the future object with the result and notifies
waiting threads.
Signed-off-by: Karsten Blees <blees@dcon.de>
Checking the work tree status is quite slow on Windows, due to slow
`lstat()` emulation (git calls `lstat()` once for each file in the
index). Windows operating system APIs seem to be much better at scanning
the status of entire directories than checking single files.
Add an `lstat()` implementation that uses a cache for lstat data. Cache
misses read the entire parent directory and add it to the cache.
Subsequent `lstat()` calls for the same directory are served directly
from the cache.
Also implement `opendir()`/`readdir()`/`closedir()` so that they create
and use directory listings in the cache.
The cache doesn't track file system changes and doesn't plug into any
modifying file APIs, so it has to be explicitly enabled for git functions
that don't modify the working copy.
Note: in an earlier version of this patch, the cache was always active and
tracked file system changes via ReadDirectoryChangesW. However, this was
much more complex and had negative impact on the performance of modifying
git commands such as 'git checkout'.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Add a macro to mark code sections that only read from the file system,
along with a config option and documentation.
This facilitates implementation of relatively simple file system level
caches without the need to synchronize with the file system.
Enable read-only sections for 'git status' and preload_index.
Signed-off-by: Karsten Blees <blees@dcon.de>
Emulating the POSIX lstat API on Windows via GetFileAttributes[Ex] is quite
slow. Windows operating system APIs seem to be much better at scanning the
status of entire directories than checking single files. A caching
implementation may improve performance by bulk-reading entire directories
or reusing data obtained via opendir / readdir.
Make the lstat implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Emulating the POSIX `dirent` API on Windows via
`FindFirstFile()`/`FindNextFile()` is pretty staightforward, however,
most of the information provided in the `WIN32_FIND_DATA` structure is
thrown away in the process. A more sophisticated implementation may
cache this data, e.g. for later reuse in calls to `lstat()`.
Make the `dirent` implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Define a base DIR structure with pointers to `readdir()`/`closedir()`
that match the `opendir()` implementation (similar to vtable pointers in
Object-Oriented Programming). Define `readdir()`/`closedir()` so that
they call the function pointers in the `DIR` structure. This allows to
choose the `opendir()` implementation on a call-by-call basis.
Make the fixed-size `dirent.d_name` buffer a flex array, as `d_name` may
be implementation specific (e.g. a caching implementation may allocate a
`struct dirent` with _just_ the size needed to hold the `d_name` in
question).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We will use them in the upcoming "FSCache" patches (to accelerate
sequential lstat() calls).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This patch pulls `contrib/subtree` on par with the AsciiDoctor 2 fixes
done to `Documentation/`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In MSYS2, we have two Python interpreters at our disposal, so we can
include the Python stuff in the build.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Make `git config --system` work like you think it should on Windows: it
should edit the file that is located in `<Git>\etc\gitconfig`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It would appear that least the Isilon network filesystem (and possibly
other network filesystems, too), report non-standard error values when
trying to access a non-existing directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch teaches `git clean` to respect NTFS junctions and Unix
bind mounts: it will now stop at those boundaries.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In Git for Windows, there is an option to mark the .git directory as
hidden. Our test cases verify this by using the system utility
`attrib.exe`.
This file name is unfortunately quite generic, and overlaps with a
Unix-y utility that might be hiding the system one in the `PATH`.
Let's specify explicitly which `attrib` to use.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
After writing to `stdout` and before reading from `stdin`, it is a good
idea to flush the former.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch avoids spawning `gzip` when asking `git archive` to
create `.tar.gz` files.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When compiling Git with a runtime prefix (so that it can be installed
into any location, finding its libexec/ directory relative to the
location of the `git` executable), it is convenient to provide
"absolute" Unix-y paths e.g. for http.sslCAInfo, and have those absolute
paths be resolved relative to the runtime prefix.
This patch makes it so for Windows. It is up for discussion whether we
want this for other platforms, too, as long as building with
RUNTIME_PREFIX.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch allows us to specify absolute paths without the drive
prefix e.g. when cloning.
Example:
C:\Users\me> git clone https://github.com/git/git \upstream-git
This will clone into a new directory C:\upstream-git, in line with how
Windows interprets absolute paths.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These fixes were necessary for Sverre Rabbelier's remote-hg to work,
but for some magic reason they are not necessary for the current
remote-hg. Makes you wonder how that one gets away with it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Update mingw_unlink() to first try to delete the file with existing
permissions before trying to force it.
Windows throws an error when trying to delete a read-only file. The
mingw_unlink() compatibility wrapper always tries to _wchmod(666) the
file before calling _wunlink() to avoid that error. However, since
most files in the worktree are already writable, this is usually
wasted effort.
Update mingw_unlink() to just call DeleteFileW() directly and if that
succeeds return. If that fails, fall back into the existing code path
to update the permissions and use _wunlink() to get the existing
error code mapping.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic thicket defines a Continuous Integration/Pull Request build
using GitHub Actions, and retires our Azure Pipeline in return.
The secondary change in this topic thicket is to make sure that Git
works with musl's libc and with BusyBox (which simplifies/changes a
couple of Git for Windows' own BusyBox patches, too).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Arguably, CI builds' most important task is to not only identify
regressions, but to make it as easy as possible to investigate what went
wrong.
In that light, we will want to provide users with a way to inspect the
tests' output as well as the corresponding directories.
This commit adds build steps that are only executed when tests failed,
uploading the relevant information as build artifacts. These artifacts
can then be downloaded by interested parties to diagnose the failures
more efficiently.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
When a test fails, it is nice to see where the corresponding code lives
in the worktree. Sadly, it seems that only Bash allows us to infer this
information. Let's do it when we detect that we're running in a Bash.
This will come in handy in the next commit, where we teach the GitHub
Actions workflow to annotate failed test runs with this information.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
We have GitHub Actions now. Running the same builds and tests in Azure
Pipelines would be redundant, and a waste of energy.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
