Git's regular Makefile mentions that HOST_CPU should be defined when cross-compiling Git: 37796bca76/Makefile (L438-L439)
This is then used to set the GIT_HOST_CPU variable when compiling Git: 37796bca76/Makefile (L1337-L1341)
Then, when the user runs `git version --build-options`, it returns that value: 37796bca76/help.c (L658)
This commit adds the same functionality to the CMake configuration. Users can now set -DHOST_CPU= to set the target architecture.
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
There are no Windows/ARM64 agents in GitHub Actions yet, therefore we
just skip adjusting the `vs-test` job for now.
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In this context, a "feature" is a dependency combined with its own
dependencies.
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The vcpkg downloads may not succeed. Warn careful readers of the time out.
A simple retry will usually resolve the issue.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The vcpkg_install batch file depends on the availability of a
working Git on the CMD path. This may not be present if the user
has selected the 'bash only' option during Git-for-Windows install.
Detect and tell the user about their lack of a working Git in the CMD
window.
Fixes#2348.
A separate PR https://github.com/git-for-windows/build-extra/pull/258
now highlights the recommended path setting during install.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
The first three commits are rebased versions of those in gitgitgadget/git#1215. These allow the following:
1. Fix `git config --global foo.bar <path>` from allowing the `<path>`. As a bonus, users with a config value starting with `/` will not get a warning about "old-style" paths needing a "`%(prefix)/`".
2. When in WSL, the path starts with `/` so it needs to be interpolated properly. Update the warning to include `%(prefix)/` to get the right value for WSL users. (This is specifically for using Git for Windows from Git Bash, but in a WSL directory.)
3. When using WSL, the ownership check fails and reports an error message. This is noisy, and happens even if the user has marked the path with `safe.directory`. Remove that error message.
In the case of Git for Windows (say, in a Git Bash window) running in a
Windows Subsystem for Linux (WSL) directory, the GetNamedSecurityInfoW()
call in is_path_owned_By_current_side() returns an error code other than
ERROR_SUCCESS. This is consistent behavior across this boundary.
In these cases, the owner would always be different because the WSL
owner is a different entity than the Windows user.
The change here is to suppress the error message that looks like this:
error: failed to get owner for '//wsl.localhost/...' (1)
Before this change, this warning happens for every Git command,
regardless of whether the directory is marked with safe.directory.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
With the addition of the safe.directory in 8959555ce
(setup_git_directory(): add an owner check for the top-level directory,
2022-03-02) released in v2.35.2, we are receiving feedback from a
variety of users about the feature.
Some users have a very large list of shared repositories and find it
cumbersome to add this config for every one of them.
In a more difficult case, certain workflows involve running Git commands
within containers. The container boundary prevents any global or system
config from communicating `safe.directory` values from the host into the
container. Further, the container almost always runs as a different user
than the owner of the directory in the host.
To simplify the reactions necessary for these users, extend the
definition of the safe.directory config value to include a possible '*'
value. This value implies that all directories are safe, providing a
single setting to opt-out of this protection.
Note that an empty assignment of safe.directory clears all previous
values, and this is already the case with the "if (!value || !*value)"
condition.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
It seems that nothing is ever checking to make sure the safe directories
in the configs actually have the key safe.directory, so some unrelated
config that has a value with a certain directory would also make it a
safe directory.
Signed-off-by: Matheus Valadares <me@m28.io>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
It is difficult to change the ownership on a directory in our test
suite, so insert a new GIT_TEST_ASSUME_DIFFERENT_OWNER environment
variable to trick Git into thinking we are in a differently-owned
directory. This allows us to test that the config is parsed correctly.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
After attempting to add directory on a network share to the `safe.directory` configuration with, for example:
```
git config --global --add safe.directory //servername/repos/myrepo
```
The warning about an outdated path style:
```
warning: encountered old-style '//servername/repos/myrepo' that should be '%(prefix)//servername/repos/myrepo'
```
However, the warning is missing a trailing `/` behind the prefix.
This PR fixes the warning such that the resulting configuration works.
Also see https://stackoverflow.com/a/71859164/4473230Closes#3786
Git for Windows v2.35.2
Changes since Git for Windows v2.35.1(2) (February 1st 2022)
This version addresses CVE-2022-24765 and CVE-2022-24767.
New Features
* Comes with Git v2.35.2.
Bug Fixes
* The uninstaller was hardened to avoid a vulnerability when running
under the SYSTEM account, addressing CVE-2022-24767.
Signed-off-by: Victoria Dye <vdye@github.com>
String in submodule--helper is not correctly formatting
placeholders. The string in git-send-email is partial.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change to warn about core.useBuiltinFSMonitor is a good one, but it
is too aggressive. If a user has set core.useBuiltinFSMonitor=false,
then that warning shows up.
Perhaps there is value in warning users that their explicit disabling of
the feature will stop working. However, VFS for Git does this
assignment, so all users on those enlistments will start getting
warnings after upgrading Git. This situation is probably much more
likely than a typical user disabling the experimental feature
themselves.
Putting in this fix is easier than rereleasing VFS for Git.
This change to warn about core.useBuiltinFSMonitor is a good one, but it
is too aggressive. If a user has set core.useBuiltinFSMonitor=false,
then that warning shows up.
Perhaps there is value in warning users that their explicit disabling of
the feature will stop working. However, VFS for Git does this
assignment, so all users on those enlistments will start getting
warnings after upgrading Git. This situation is probably much more
likely than a typical user disabling the experimental feature
themselves.
Putting in this fix is easier than rereleasing VFS for Git.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
The `--preserve-merges` option was removed by v2.35.0. However
users may not be aware that it is also a Pull option, and it is
still offered by major IDE vendors such as Visual Studio.
Extend the `--preserve-merges` die message to direct users to
this option and it's locations.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Git will die if a "rebase --preserve-merges" is in progress.
Users cannot --quit, --abort or --continue the rebase.
This sceario can occur if the user updates their Git, or switches
to another newer version, after starting a preserve-merges rebase,
commonly via the pull setting.
One trigger is an unexpectedly difficult to resolve conflict, as
reported on the `git-users` group.
(https://groups.google.com/g/git-for-windows/c/3jMWbBlXXHM)
Tell the user the cause, i.e. the existence of the directory.
The problem must be resolved manually, `git rebase --<option>`
commands will die, or the user must downgrade. Also, note that
the deleted options are no longer shown in the documentation.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Previously, we interpolated paths in config variables that start with a
forward-slash as relative to the runtime prefix. This was not portable
and has been replaced with `%(prefix)/`.
Let's warn users when they use the now-deprecated form.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch re-adds the deprecated --stdin/-z options to `git
reset`. Those patches were overridden by a different set of options in
the upstream Git project before we could propose `--stdin`.
We offered this in MinGit to applications that wanted a safer way to
pass lots of pathspecs to Git, and these applications will need to be
adjusted.
Instead of `--stdin`, `--pathspec-from-file=-` should be used, and
instead of `-z`, `--pathspec-file-nul`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This branch allows third-party tools to call `git status
--no-lock-index` to avoid lock contention with the interactive Git usage
of the actual human user.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A fix for calling `vim` in Windows Terminal caused a regression and was
reverted. We partially un-revert this, to get the fix again.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is the recommended way on GitHub to describe policies revolving around
security issues and about supported versions.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Rather than using private IFTTT Applets that send mails to this
maintainer whenever a new version of a Git for Windows component was
released, let's use the power of GitHub workflows to make this process
publicly visible.
This workflow monitors the Atom/RSS feeds, and opens a ticket whenever a
new version was released.
Note: Bash sometimes releases multiple patched versions within a few
minutes of each other (i.e. 5.1p1 through 5.1p4, 5.0p15 and 5.0p16). The
MSYS2 runtime also has a similar system. We can address those patches as
a group, so we shouldn't get multiple issues about them.
Note further: We're not acting on newlib releases, OpenSSL alphas, Perl
release candidates or non-stable Perl releases. There's no need to open
issues about them.
Co-authored-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, an absolute POSIX path needs to be turned into a Windows
one. We used to interpret paths starting with a single `/` as relative
to the runtime-prefix, but now these need to be prefixed with
`%(prefix)/`. Let's warn for now, but still handle it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The `--stdin` option was a well-established paradigm in other commands,
therefore we implemented it in `git reset` for use by Visual Studio.
Unfortunately, upstream Git decided that it is time to introduce
`--pathspec-from-file` instead.
To keep backwards-compatibility for some grace period, we therefore
reinstate the `--stdin` option on top of the `--pathspec-from-file`
option, but mark it firmly as deprecated.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It was a bad idea to just remove that option from Git for Windows
v2.15.0, as early users of that (still experimental) option would have
been puzzled what they are supposed to do now.
So let's reintroduce the flag, but make sure to show the user good
advice how to fix this going forward.
We'll remove this option in a more orderly fashion when we're certain
that the option is no longer used (previous Visual Studio versions
relied on it).
The option is deprecated now, therefore we make sure that keeps saying
so until we finally remove it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When a third-party tool periodically runs `git status` in order to keep
track of the state of the working tree, it is a bad idea to lock the
index: it might interfere with interactive commands executed by the
user, e.g. when the user wants to commit files.
Git for Windows introduced the `--no-lock-index` option a long time ago
to fix that (it made it into Git for Windows v2.9.2(3)) by simply
avoiding to write that file.
The downside is that the periodic `git status` calls will be a little
bit more wasteful because they may have to refresh the index repeatedly,
only to throw away the updates when it exits. This cannot really be
helped, though, as tools wanting to get a periodic update of the status
have no way to predict when the user may want to lock the index herself.
Sadly, a competing approach was submitted (by somebody who apparently
has less work on their plate than this maintainer) that made it into
v2.15.0 but is *different*: instead of a `git status`-only option, it is
an option that comes *before* the Git command and is called differently,
too.
Let's give previous users a chance to upgrade to newer Git for Windows
versions by handling the `--no-lock-index` option, still, though with a
big fat warning.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
