In Git for Windows, there is an option to mark the .git directory as
hidden. Our test cases verify this by using the system utility
`attrib.exe`.
This file name is unfortunately quite generic, and overlaps with a
Unix-y utility that might be hiding the system one in the `PATH`.
Let's specify explicitly which `attrib` to use.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
After writing to `stdout` and before reading from `stdin`, it is a good
idea to flush the former.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It is a good idea in general to avoid pipes in test cases, as it makes
things more debuggable to have files to inspect (instead of ephemereal
piped data that is long gone).
This also seemed to work around a problem where MSYS2' Perl would
segfault which may, or may not, still be present today.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This branch introduces support for reading the "Windows-wide" Git
configuration from `%PROGRAMDATA%\Git\config`. As these settings are
intended to be shared between *all* Git-related software, that config
file takes an even lower precedence than `$(prefix)/etc/gitconfig`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch avoids spawning `gzip` when asking `git archive` to
create `.tar.gz` files.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When compiling Git with a runtime prefix (so that it can be installed
into any location, finding its libexec/ directory relative to the
location of the `git` executable), it is convenient to provide
"absolute" Unix-y paths e.g. for http.sslCAInfo, and have those absolute
paths be resolved relative to the runtime prefix.
This patch makes it so for Windows. It is up for discussion whether we
want this for other platforms, too, as long as building with
RUNTIME_PREFIX.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch teaches Git to accept UNC paths of the form
file://host/share/repository.git.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch allows us to specify absolute paths without the drive
prefix e.g. when cloning.
Example:
C:\Users\me> git clone https://github.com/git/git \upstream-git
This will clone into a new directory C:\upstream-git, in line with how
Windows interprets absolute paths.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This fixes a bug where a .git directory at the root of a network share
(e.g. \\MYSERVER\sharedfolder\.git) was not handled correctly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These fixes were necessary for Sverre Rabbelier's remote-hg to work,
but for some magic reason they are not necessary for the current
remote-hg. Makes you wonder how that one gets away with it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch adds the (experimental) --stdin/-z options to `git
reset`. Those patches are still under review in the upstream Git project,
but are already merged in their experimental form into Git for Windows'
`master` branch, in preparation for a MinGit-only release.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We should not actually expect the first `attrib.exe` in the PATH to
be the one we are looking for. Or that it is in the PATH, for that
matter.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
For performance reasons `stdout` is buffered by default. That leads to
problems if after printing to `stdout` a read on `stdin` is performed.
For that reason interactive commands like `git clean -i` do not function
properly anymore if the `stdout` is not flushed by `fflush(stdout)` before
trying to read from `stdin`.
So let's precede all reads on `stdin` in `git clean -i` by flushing
`stdout`.
Signed-off-by: 마누엘 <nalla@hamal.uberspace.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When grepping through the output of a command in the test suite, there
is always a chance that something goes wrong, in which case there would
not be anything useful to debug.
Let's redirect the output into a file instead, and grep that file, so
that the log can be inspected easily if the grep fails.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
To avoid running into command line limitations, some of Git's commands
support the `--stdin` option.
Let's use exactly this option in the three rev-list/log invocations in
gitk that would otherwise possibly run the danger of trying to invoke a
too-long command line.
While it is easy to redirect either stdin or stdout in Tcl/Tk scripts,
what we need here is both. We need to capture the output, yet we also
need to pipe in the revs/files arguments via stdin (because stdin does
not have any limit, unlike the command line). To help this, we use the
neat Tcl feature where you can capture stdout and at the same time feed
a fixed string as stdin to the spawned process.
One non-obvious aspect about this change is that the `--stdin` option
allows to specify revs, the double-dash, and files, but *no* other
options such as `--not`. This is addressed by prefixing the "negative"
revs with `^` explicitly rather than relying on the `--not` option
(thanks for coming up with that idea, Max!).
This fixes https://github.com/git-for-windows/git/issues/1987
Analysis-and-initial-patch-by: Max Kirillov <max@max630.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
From the documentation of said setting:
This boolean will enable fsync() when writing object files.
This is a total waste of time and effort on a filesystem that
orders data writes properly, but can be useful for filesystems
that do not use journalling (traditional UNIX filesystems) or
that only journal metadata and not file contents (OS X’s HFS+,
or Linux ext3 with "data=writeback").
The most common file system on Windows (NTFS) does not guarantee that
order, therefore a sudden loss of power (or any other event causing an
unclean shutdown) would cause corrupt files (i.e. files filled with
NULs). Therefore we need to change the default.
Note that the documentation makes it sound as if this causes really bad
performance. In reality, writing loose objects is something that is done
only rarely, and only a handful of files at a time.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Between the libgit2 and the Git for Windows project, there has been a
discussion how we could share Git configuration to avoid duplication (or
worse: skew).
Earlier, libgit2 was nice enough to just re-use Git for Windows'
C:\Program Files (x86)\Git\etc\gitconfig
but with the upcoming Git for Windows 2.x, there would be more paths to
search, as we will have 64-bit and 32-bit versions, and the
corresponding config files will be in %PROGRAMFILES%\Git\mingw64\etc and
...\mingw32\etc, respectively.
Worse: there are portable Git for Windows versions out there which live
in totally unrelated directories, still.
Therefore we came to a consensus to use `%PROGRAMDATA%\Git\config` as the
location for shared Git settings that are of wider interest than just Git
for Windows.
Of course, the configuration in `%PROGRAMDATA%\Git\config` has the
widest reach, therefore it must take the lowest precedence, i.e. Git for
Windows can still override settings in its `etc/gitconfig` file.
Helped-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
... because we can, now.
We specifically reduce the number of parallel links for MSVC, as RAM
usage is an issue with MSVC's parallel mode, manifested in the symptom:
fatal error LNK1318: Unexpected PDB error; OK (0) ''
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This was a left-over from the previous YAML schema, and it no longer
works. The problem was noticed while editing `azure-pipelines.yml` in VS
Code with the very helpful "Azure Pipelines" extension (syntax
highlighting and intellisense for `azure-pipelines.yml`...).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The return value of that function is 0 both for variables that are
unset, as well as for variables whose values are empty. To discern those
two cases, one has to call `GetLastError()`, whose return value is
`ERROR_ENVVAR_NOT_FOUND` and `ERROR_SUCCESS`, respectively.
Except that it is not actually set to `ERROR_SUCCESS` in the latter
case, apparently, but the last error value seems to be simply unchanged.
To work around this, let's just re-set the last error value just before
inspecting the environment variable.
This fixes a problem that triggers failures in t3301-notes.sh (where we
try to override config settings by passing empty values for certain
environment variables).
This problem is hidden in the MINGW build by the fact that older
MSVC runtimes (such as the one used by MINGW builds) have a `calloc()`
that re-sets the last error value in case of success, while newer
runtimes set the error value only if `NULL` is returned by that
function.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We frequently build Git using the `DEVELOPER=1` make setting as a
shortcut to enable all kinds of more stringent compiler warnings.
Those compiler warnings are relatively specific to GCC, though, so let's
try our best to translate them to the equivalent options to pass to MS
Visual C++'s `cl.exe`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
To build with MSVC, we "translate" GCC options to MSVC options, and part
of those options refer to the libraries to link into the final
executable. Currently, this part looks somewhat like this on Windows:
-lcurl -lnghttp2 -lidn2 -lssl -lcrypto -lssl -lcrypto -lgdi32
-lcrypt32 -lwldap32 -lz -lws2_32 -lexpat
Some of those are direct dependencies (such as curl and ssl) and others
are indirect (nghttp2 and idn2, for example, are dependencies of curl,
but need to be linked in for reasons).
We already handle the direct dependencies, e.g. `-liconv` is already
handled as adding `libiconv.lib` to the list of libraries to link
against.
Let's just ignore the remaining `-l*` options so that MSVC does not have
to warn us that it ignored e.g. the `/lnghttp2` option. We do that by
extending the clause that already "eats" the `-R*` options to also eat
the `-l*` options.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
MSVC would complain thusly:
C4200: nonstandard extension used: zero-sized array in struct/union
Let's just use the `FLEX_ARRAY` constant that we introduced for exactly
this type of scenario.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
MSVC complains about this with `-Wall`, which can be taken as a sign
that this is indeed a real bug. The symptom is:
C4146: unary minus operator applied to unsigned type, result
still unsigned
Let's avoid this warning in the minimal way, e.g. writing `-1 -
<unsigned value>` instead of `-<unsigned value> - 1`.
Note that the change in the `estimate_cache_size()` function is
needed because MSVC considers the "return type" of the `sizeof()`
operator to be `size_t`, i.e. unsigned, and therefore it cannot be
negated using the unary minus operator.
Even worse, that arithmetic is doing extra work, in vain. We want to
calculate the entry extra cache size as the difference between the
size of the `cache_entry` structure minus the size of the
`ondisk_cache_entry` structure, padded to the appropriate alignment
boundary.
To that end, we start by assigning that difference to the `per_entry`
variable, and then abuse the `len` parameter of the
`align_padding_size()` macro to take the negative size of the ondisk
entry size. Essentially, we try to avoid passing the already calculated
difference to that macro by passing the operands of that difference
instead, when the macro expects operands of an addition:
#define align_padding_size(size, len) \
((size + (len) + 8) & ~7) - (size + len)
Currently, we pass A and -B to that macro instead of passing A - B and
0, where A - B is already stored in the `per_entry` variable, ready to
be used.
This is neither necessary, nor intuitive. Let's fix this, and have code
that is both easier to read and that also does not trigger MSVC's
warning.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch fixes a corner case that is amazingly common in this
developer's workflow: in a `git stash -p`, splitting a hunk and stashing
only part of it runs into a (known) bug where the partial hunk cannot be
applied in reverse.
It is one of those "good enough" fixes, not a full fix, though, as the
full fix would require a 3-way merge between `stash^` and the *worktree*
(not `HEAD`), with `stash` as merge base (i.e. a `git revert`, but on
top of the current worktree).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This function is marked as `NORETURN`, and it indeed does not want to
return anything. So let's not declare it with the return type `int`.
This fixes the following warning when building with MSVC:
C4646: function declared with 'noreturn' has non-void return type
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is the final leg of the journey to a fully built-in `git add`: the
`git add -i` and `git add -p` modes were re-implemented in C, but they
lacked support for a couple of config settings.
The one that sticks out most is the `interactive.singleKey` setting: it
was not only particularly hard to get to work, especially on Windows. It
is also the setting that seems to be incomplete already in the Perl
version: while the name suggests that it applies to the main loop of
`git add --interactive`, or to the file selections in that command, it
does not. Only the `git add --patch` mode respects that setting.
As it is outside the purpose of the conversion of
`git-add--interactive.perl` to C, we will leave that loose end for some
future date.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
At this stage on the journey to a fully built-in `git add`, we already
have everything we need, including the `--interactive` and `--patch`
options, as long as the `add.interactive.useBuiltin` setting is set to
`true` (kind of a "turned off feature flag", which it will be for a
while, until we get confident enough that the built-in version does the
job, and retire the Perl script).
However, the internal `add--interactive` helper is also used to back the
`--patch` option of `git stash`, `git reset` and `git checkout`.
This patch series brings them "online".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Out of all the patch series on the journey to provide `git add
--interactive` and `git add --patch` in a built-in versions, this is the
big one, as can be expected from the fact that the `git add --patch`
functionality makes up over half of the 1,800+ lines of
`git-add--interactive.perl`.
The two patches that stick out are of course the ones to implement hunk
splitting and hunk editing: these operations are fundamentally more
complicated, and less obvious, than the rest of the operations.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
While re-implementing `git add -i` and `git add -p` in C, I tried to
make sure that there is test coverage for all of the features I convert
from Perl to C, to give me some confidence in the correctness from
running the test suite both with `GIT_TEST_ADD_I_USE_BUILTIN=true` and
with `GIT_TEST_ADD_I_USE_BUILTIN=false`.
However, I discovered that there are a couple of gaps. This patch series
intends to close them.
The first patch might actually not be considered a gap by some: it
basically removes the need for the `TTY` prerequisite in the `git add
-i` tests to verify that the output is colored all right. This change is
rather crucial for me, though: on Windows, where the conversion to a
built-in shows the most obvious benefits, there are no pseudo terminals
(yet), therefore `git.exe` cannot work with them (even if the MSYS2 Perl
interpreter used by Git for Windows knows about some sort of pty
emulation). And I *really* wanted to make sure that the colors work on
Windows, as I personally get a lot out of those color cues.
The patch series ends by addressing two issues that are not exactly
covering testing gaps:
- While adding a test case, I noticed that `git add -p` exited with
*success* when it could not even generate a diff. This is so obviously
wrong that I had to fix it right away (I noticed, actually, because my
in-progress built-in `git add -p` failed, and the Perl version did
not), and I used the same test case to verify that this is fixed once
and for all.
- While working on covering those test gaps, I noticed a problem in an
early version of the built-in version of `git add -p` where the `git
apply --allow-overlap` mode failed to work properly, for little
reason, and I fixed it real quick.
It would seem that the `--allow-overlap` function is not only
purposefully under-documented, but also purposefully under-tested,
probably to discourage its use. I do not quite understand what I
perceive to be Junio's aversion to that option, but I did not feel
like I should put up a battle here, so I did not accompany this fix
with a new test script.
In the end, the built-in version of `git add -p` does not use the
`--allow-overlap` function at all, anyway. Which should make everybody
a lot happier.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This patch series implements the rest of the commands in `git add -i`'s
main loop: `update`, `revert`, `add_untracked`, `patch`, `diff`, and
`quit`. Apart from `quit`, these commands are all very similar in that
they first build a list of files, display it, let the user choose which
ones to act on, and then perform the action.
Note that the `patch` command is not actually converted to C, not
completely at least: the built-in version simply hands off to `git
add--interactive` after letting the user select which files to act on.
The reason for this omission is practicality. Out of the 1,800+ lines of
`git-add--interactive.perl`, over a thousand deal *just* with the `git
add -p` part. I did convert that functionality already (to be
contributed in a separate patch series), discovering that there is so
little overlap between the `git add --patch` part and the rest of `git
add --interactive` that I could put the former into a totally different
file: `add-patch.c`. Just a teaser ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When trying to stash part of the worktree changes by splitting a hunk
and then only partially accepting the split bits and pieces, the user
is presented with a rather cryptic error:
error: patch failed: <file>:<line>
error: test: patch does not apply
Cannot remove worktree changes
and the command would fail to stash the desired parts of the worktree
changes (even if the `stash` ref was actually updated correctly).
We even have a test case demonstrating that failure, carrying it for
four years already.
The explanation: when splitting a hunk, the changed lines are no longer
separated by more than 3 lines (which is the amount of context lines
Git's diffs use by default), but less than that. So when staging only
part of the diff hunk for stashing, the resulting diff that we want to
apply to the worktree in reverse will contain those changes to be
dropped surrounded by three context lines, but since the diff is
relative to HEAD rather than to the worktree, these context lines will
not match.
Example time. Let's assume that the file README contains these lines:
We
the
people
and the worktree added some lines so that it contains these lines
instead:
We
are
the
kind
people
and the user tries to stash the line containing "are", then the command
will internally stage this line to a temporary index file and try to
revert the diff between HEAD and that index file. The diff hunk that
`git stash` tries to revert will look somewhat like this:
@@ -1776,3 +1776,4
We
+are
the
people
It is obvious, now, that the trailing context lines overlap with the
part of the original diff hunk that the user did *not* want to stash.
Keeping in mind that context lines in diffs serve the primary purpose of
finding the exact location when the diff does not apply precisely (but
when the exact line number in the file to be patched differs from the
line number indicated in the diff), we work around this by reducing the
amount of context lines: the diff was just generated.
Note: this is not a *full* fix for the issue. Just as demonstrated in
t3701's 'add -p works with pathological context lines' test case, there
are ambiguities in the diff format. It is very rare in practice, of
course, to encounter such repeated lines.
The full solution for such cases would be to replace the approach of
generating a diff from the stash and then applying it in reverse by
emulating `git revert` (i.e. doing a 3-way merge). However, in `git
stash -p` it would not apply to `HEAD` but instead to the worktree,
which makes this non-trivial to implement as long as we also maintain a
scripted version of `add -i`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This job runs the test suite twice, once in regular mode, and once with
a whole slew of `GIT_TEST_*` variables set.
Now that the built-in version of `git add --interactive` is
feature-complete, let's also throw `GIT_TEST_MULTI_PACK_INDEX` into that
fray.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The first part of the long journey to a fully built-in `git add -i`.
It reflects the part that was submitted a couple of times (see
https://github.com/gitgitgadget/git/pull/103) during the Outreachy
project by Slavica Đukić that continued the journey based on an initial
patch series by Daniel Ferreira.
This part only implements the `status` and the `help` part, like
Slavica's last iteration did, in the interest of making the review
remotely more reviewable. I fear that this attempt of making it a bit
more reviewable is pretty futile, as so many things changed. So I will
ask the reviewers for forgiveness: please be kind, and give this sort of
a fresh review.
I threw in a couple of major changes on top of that iteration, though:
- The original plan was to add a helper (`git add--helper`) that takes
over more and more responsibility from the Perl script over the course
of the conversion.
This plan is no longer in effect, as I encountered a serious problem
with that: the MSYS2 runtime used by the Perl interpreter which Git
for Windows employs to run `git add -i` has a curious bug (that is
safely outside the purview of this here patch series) where it fails
to read from standard input after it spawned a non-MSYS2 program that
reads from standard input. To keep my `git add -i` in a working state,
I therefore adopted a different strategy:
Just like `git difftool` was converted by starting with a built-in
that did nothing but handing off to the scripted version, guarded by
the (opt-in) `difftool.useBuiltin` config setting, I start this patch
series by a built-in `add -i` that does nothing else but state that it
is not implemented yet, guarded by the (opt-in)
`add.interactive.useBuiltin` config setting.
In contrast to the `git difftool` situation, it is quite a bit easier
here, as we do not even have to rename the script to
`git-legacy-add--interactive.perl`: the `add--interactive` command is
an implementation detail that users are not even supposed to know
about. Therefore, we can implement that road fork between the built-in
and the scripted version in `builtin/add.c`, i.e. in the user-facing
`git add` command.
This will also naturally help with the transition to a fully built-in
`git add -i`/`git add -p`, as we saw with the built-in `git rebase`
how important it is for end users to have an escape hatch (and for
that reason, tried our best to provide the same with the built-in `git
stash`).
- The `help` command was actually not hooked up in `git add -i`, but was
only available as a special option of the `git add--helper` command.
As that command no longer exists, I kind of *had* to implement
some way to let the built-in `git add -i` show the help text.
- The main loop of `git add -i` (i.e. the thing that lets you choose
`status` or `help`) is now implemented (but only lists `status` and
`help`, of course), as it makes use of that feature that took the main
chunk of the Outreachy project: the function to determine unique
prefixes of a list of strings.
- Speaking of the unique prefixes: the functionality to determine those
is now encapsulated in the `prefix-map.c` file, and I also added a
regression test.
- Speaking of the tests: I also implemented support for the environment
variable `GIT_TEST_ADD_I_USE_BUILTIN`: by setting it, the test suite
can be forced to use the built-in, or the Perl script, version of `git
add -i`. Needless to say: by the end of this patch series, running the
test suite with `GIT_TEST_ADD_I_USE_BUILTIN=true` will still result in
a ton of test failures due to not-yet-implemented commands, but it
will also demonstrate what *already* works.
- Since the main loop starts not only by showing the status, but
refreshes the index before that, I added that, and I actually
refactored that code into a new function
(`repo_refresh_and_write_index()`), as it will be used a couple of
times by the end of the complete conversion of `git add -i` into a
built-in command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In 7e9e048661 (stash -p: demonstrate failure of split with mixed y/n,
2015-04-16), a regression test for a known breakage that was added to
the test script `t3904-stash-patch.sh` that demonstrated that splitting
a hunk and trying to stash only part of that split hunk fails (but
shouldn't).
As expected, it still fails, but for the wrong reason: once the bug is
fixed, we would expect stderr to show nothing, yet the regression test
expects stderr to show something.
Let's fix that by telling that regression test case to expect nothing to
be printed to stderr.
While at it, also drop the obvious left-over from debugging where the
regression test did not mind `git stash -p` to return a non-zero exit
status.
Of course, the regression test still fails, but this time for the
correct reason.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When `interactive.singlekey = true`, we react immediately to keystrokes,
even to Escape sequences (e.g. when pressing a cursor key).
The problem with Escape sequences is that we do not really know when
they are done, and as a heuristic we poll standard input for half a
second to make sure that we got all of it.
While waiting half a second is not asking for a whole lot, it can become
quite annoying over time, therefore with this patch, we read the
terminal capabilities (if available) and extract known Escape sequences
from there, then stop polling immediately when we detected that the user
pressed a key that generated such a known sequence.
This recapitulates the remaining part of b5cc003253 (add -i: ignore
terminal escape sequences, 2011-05-17).
Note: We do *not* query the terminal capabilities directly. That would
either require a lot of platform-specific code, or it would require
linking to a library such as ncurses.
Linking to a library in the built-ins is something we try very hard to
avoid (we even kicked the libcurl dependency to a non-built-in remote
helper, just to shave off a tiny fraction of a second from Git's startup
time). And the platform-specific code would be a maintenance nightmare.
Even worse: in Git for Windows' case, we would need to query MSYS2
pseudo terminals, which `git.exe` simply cannot do (because it is
intentionally *not* an MSYS2 program).
To address this, we simply spawn `infocmp -L -1` and parse its output
(which works even in Git for Windows, because that helper is included in
the end-user facing installations).
This is done only once, as in the Perl version, but it is done only when
the first Escape sequence is encountered, not upon startup of `git add
-i`; This saves on startup time, yet makes reacting to the first Escape
sequence slightly more sluggish. But it allows us to keep the
terminal-related code encapsulated in the `compat/terminal.c` file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The scripted version of `git stash` called directly into the Perl script
`git-add--interactive.perl`, and this was faithfully converted to C.
However, we have a much better way to do this now: call `git add
--patch=<mode>`, which incidentally also respects the config setting
`add.interactive.useBuiltin`.
Let's do this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This recapitulates part of b5cc003253 (add -i: ignore terminal escape
sequences, 2011-05-17):
add -i: ignore terminal escape sequences
On the author's terminal, the up-arrow input sequence is ^[[A, and
thus fat-fingering an up-arrow into 'git checkout -p' is quite
dangerous: git-add--interactive.perl will ignore the ^[ and [
characters and happily treat A as "discard everything".
As a band-aid fix, use Term::Cap to get all terminal capabilities.
Then use the heuristic that any capability value that starts with ^[
(i.e., \e in perl) must be a key input sequence. Finally, given an
input that starts with ^[, read more characters until we have read a
full escape sequence, then return that to the caller. We use a
timeout of 0.5 seconds on the subsequent reads to avoid getting stuck
if the user actually input a lone ^[.
Since none of the currently recognized keys start with ^[, the net
result is that the sequence as a whole will be ignored and the help
displayed.
Note that we leave part for later which uses "Term::Cap to get all
terminal capabilities", for several reasons:
1. it is actually not really necessary, as the timeout of 0.5 seconds
should be plenty sufficient to catch Escape sequences,
2. it is cleaner to keep the change to special-case Escape sequences
separate from the change that reads all terminal capabilities to
speed things up, and
3. in practice, relying on the terminal capabilities is a bit overrated,
as the information could be incomplete, or plain wrong. For example,
in this developer's tmux sessions, the terminal capabilities claim
that the "cursor up" sequence is ^[M, but the actual sequence
produced by the "cursor up" key is ^[[A.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The built-in `git add -i` machinery obviously has its `the_repository`
structure initialized at the point where `cmd_commit()` calls it, and
therefore does not look at the environment variable `GIT_INDEX_FILE`.
But it has to, because the index was already locked, and we want to ask
the interactive add machinery to work on the `index.lock` file instead
of the `index` file.
Technically, we could teach `run_add_i()` (and `run_add_p()`) to look
specifically at that environment variable, but the entire idea of
passing in a parameter of type `struct repository *` is to allow working
on multiple repositories (and their index files) independently.
So let's instead override the `index_file` field of that structure
temporarily.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The Perl version of `git add -p` supports this config setting to allow
users to input commands via single characters (as opposed to having to
press the <Enter> key afterwards).
This is an opt-in feature because it requires Perl packages
(Term::ReadKey and Term::Cap, where it tries to handle an absence of the
latter package gracefully) to work. Note that at least on Ubuntu, that
Perl package is not installed by default (it needs to be installed via
`sudo apt-get install libterm-readkey-perl`), so this feature is
probably not used a whole lot.
In C, we obviously do not have these packages available, but we just
introduced `read_single_keystroke()` that is similar to what
Term::ReadKey provides, and we use that here.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is a straight-forward port of 2f0896ec3a (restore: support
--patch, 2019-04-25) which added support for `git restore -p`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
