This fixes a bug where a .git directory at the root of a network share
(e.g. \\MYSERVER\sharedfolder\.git) was not handled correctly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These fixes were necessary for Sverre Rabbelier's remote-hg to work,
but for some magic reason they are not necessary for the current
remote-hg. Makes you wonder how that one gets away with it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch adds the (experimental) --stdin/-z options to `git
reset`. Those patches are still under review in the upstream Git project,
but are already merged in their experimental form into Git for Windows'
`master` branch, in preparation for a MinGit-only release.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When working in the root directory of a file share (this is only
possible in Git Bash and Powershell, but not in CMD), the current
directory is reported without a trailing slash.
This is different from Unix and standard Windows directories: both / and
C:\ are reported with a trailing slash as current directories.
If a Git worktree is located there, Git is not quite prepared for that:
while it does manage to find the .git directory/file, it returns as
length of the top-level directory's path *one more* than the length of
the current directory, and setup_git_directory_gently() would then
return an undefined string as prefix.
In practice, this undefined string usually points to NUL bytes, and does
not cause much harm. Under rare circumstances that are really involved
to reproduce (and not reliably so), the reported prefix could be a
suffix string of Git's exec path, though.
A careful analysis determined that this bug is unlikely to be
exploitable, therefore we mark this as a regular bug fix.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A very common assumption in Git's source code base is that
offset_1st_component() returns either 0 for relative paths, or 1 for
absolute paths that start with a slash. In other words, the return value
is either 0 or points just after the dir separator.
This assumption is not fulfilled when calling offset_1st_component()
e.g. on UNC paths on Windows, e.g. "//my-server/my-share". In this case,
offset_1st_component() returns the length of the entire string (which is
correct, because stripping the last "component" would not result in a
valid directory), yet the return value still does not point just after a
dir separator.
This assumption is most prominently seen in the
setup_git_directory_gently_1() function, where we want to append a
".git" component and simply assume that there is already a dir
separator. In the UNC example given above, this assumption is incorrect.
As a consequence, Git will fail to handle a worktree at the top of a UNC
share correctly.
Let's fix this by adding a dir separator specifically for that case: we
found that there is no first component in the path and it does not end
in a dir separator? Then add it.
This fixes https://github.com/git-for-windows/git/issues/1320
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
7ebac8cb94 made launching of .exe
externals work when installed in Unicode paths. But it broke launching
of non-.exe externals, no matter where they were installed. We now
correctly maintain the UTF-8 and UTF-16 paths in tandem in lookup_prog.
This fixes t5526, among others.
Signed-off-by: Adam Roben <adam@roben.org>
After importing anything with fast-import, we should always let the
garbage collector do its job, since the objects are written to disk
inefficiently.
This brings down an initial import of http://selenic.com/hg from about
230 megabytes to about 14.
In the future, we may want to make this configurable on a per-remote
basis, or maybe teach fast-import about it in the first place.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Just like with other Git commands, this option makes it read the paths
from the standard input. It comes in handy when resetting many, many
paths at once and wildcards are not an option (e.g. when the paths are
generated by a tool).
Note: we first parse the entire list and perform the actual reset action
only in a second phase. Not only does this make things simpler, it also
helps performance, as do_diff_cache() traverses the index and the
(sorted) pathspecs in simultaneously to avoid unnecessary lookups.
This feature is marked experimental because it is still under review in
the upstream Git project.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
If Git were installed in a path containing non-ASCII characters,
commands such as git-am and git-submodule, which are implemented as
externals, would fail to launch with the following error:
> fatal: 'am' appears to be a git command, but we were not
> able to execute it. Maybe git-am is broken?
This was due to lookup_prog not being Unicode-aware. It was somehow
missed in 2ee5a1a14a.
Note that the only problem in this function was calling
GetFileAttributes instead of GetFileAttributesW. The calls to access()
were fine because access() is a macro which resolves to mingw_access,
which already handles Unicode correctly. But I changed lookup_prog to
use _waccess directly so that we only convert the path to UTF-16 once.
Signed-off-by: Adam Roben <adam@roben.org>
This happens only when the corresponding commits are not exported in
the current fast-export run. This can happen either when the relevant
commit is already marked, or when the commit is explicitly marked
as UNINTERESTING with a negative ref by another argument.
This breaks fast-export basec remote helpers.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
We need to make sure that MinGit/Portable Git only pick up a legitimate
ProgramData config.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Inspired by 21416f0a07 ("restore: fix typo in docs", 2019-08-03), I ran
"git grep -E '(\b[a-zA-Z]+) \1\b' -- Documentation/" to find other cases
where words were duplicated, e.g. "the the", and in most cases removed
one of the repeated words.
There were many false positives by this grep command, including
deliberate repeated words like "really really" or valid uses of "that
that" which I left alone, of course.
I also did not correct any of the legitimate, accidentally repeated
words in old RelNotes.
Signed-off-by: Mark Rushakoff <mark.rushakoff@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
My IEE 'home for life' email service is being withdrawn on 30 Sept 2019.
Replace with my new email domain.
I also have a secondary (backup) 'home for life' through
<philipoakley@dunelm.org.uk>.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git 2.23-rc2
* tag 'v2.23.0-rc2' of git://git.kernel.org/pub/scm/git/git: (63 commits)
Git 2.23-rc2
t0000: reword comments for "local" test
t: decrease nesting in test_oid_to_path
sha1-file: release strbuf after use
test-dir-iterator: use path argument directly
dir-iterator: release strbuf after use
commit-graph: release strbufs after use
l10n: reformat some localized strings for v2.23.0
merge-recursive: avoid directory rename detection in recursive case
commit-graph: fix bug around octopus merges
restore: fix typo in docs
doc: typo: s/can not/cannot/ and s/is does/does/
Git 2.23-rc1
log: really flip the --mailmap default
RelNotes/2.23.0: fix a few typos and other minor issues
RelNotes/2.21.1: typofix
log: flip the --mailmap default unconditionally
config: work around bug with includeif:onbranch and early config
A few more last-minute fixes
repack: simplify handling of auto-bitmaps and .keep files
...
Compilation fix.
* cb/xdiff-no-system-includes-in-dot-c:
xdiff: remove duplicate headers from xpatience.c
xdiff: remove duplicate headers from xhistogram.c
xdiff: drop system includes in xutils.c
The internal diff machinery can be made to read out of bounds while
looking for --funcion-context line in a corner case, which has been
corrected.
* jk/xdiff-clamp-funcname-context-index:
xdiff: clamp function context indices in post-image
This branch allows third-party tools to call `git status
--no-lock-index` to avoid lock contention with the interactive Git usage
of the actual human user.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We already avoid traversing NTFS junction points in `git clean -dfx`.
With this topic branch, we do that when the FSCache is enabled, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When updating the skip-worktree bits in the index to align with new
values in a sparse-checkout file, Git scans the entire working
directory with lstat() calls. In a sparse-checkout, many of these
lstat() calls are for paths that do not exist.
Enable the fscache feature during this scan.
In a local test of a repo with ~2.2 million paths, updating the index
with `git read-tree -m -u HEAD` with a sparse-checkout file containing
only `/.gitattributes` improved from 2-3 minutes to 15-20 seconds.
More work could be done to stop running lstat() calls when recursing
into directories that are known to not exist.
