In MSYS2, we have two Python interpreters at our disposal, so we can
include the Python stuff in the build.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch teaches `git clean` to respect NTFS junctions and Unix
bind mounts: it will now stop at those boundaries.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch allows us to specify absolute paths without the drive
prefix e.g. when cloning.
Example:
C:\Users\me> git clone https://github.com/git/git \upstream-git
This will clone into a new directory C:\upstream-git, in line with how
Windows interprets absolute paths.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These fixes were necessary for Sverre Rabbelier's remote-hg to work,
but for some magic reason they are not necessary for the current
remote-hg. Makes you wonder how that one gets away with it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
While Git for Windows does not _ship_ Python (in order to save on
bandwidth), MSYS2 provides very fine Python interpreters that users can
easily take advantage of, by using Git for Windows within its SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Windows' equivalent to "bind mounts", NTFS junction points, can be
unlinked without affecting the mount target. This is clearly what users
expect to happen when they call `git clean -dfx` in a worktree that
contains NTFS junction points: the junction should be removed, and the
target directory of said junction should be left alone (unless it is
inside the worktree).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, there are several categories of absolute paths. One such
category starts with a backslash and is implicitly relative to the drive
associated with the current working directory. Example:
c:
git clone https://github.com/git-for-windows/git \G4W
should clone into C:\G4W.
Back in 2017, Juan Carlos Arevalo Baeza reported a bug in Git's handling
of those absolute paths was identified, and fixed. Let's make sure that
it stays fixed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These fixes have been sent to the Git mailing list but have not been
picked up by the Git project yet.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
After importing anything with fast-import, we should always let the
garbage collector do its job, since the objects are written to disk
inefficiently.
This brings down an initial import of http://selenic.com/hg from about
230 megabytes to about 14.
In the future, we may want to make this configurable on a per-remote
basis, or maybe teach fast-import about it in the first place.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It seems to be not exactly rare on Windows to install NTFS junction
points (the equivalent of "bind mounts" on Linux/Unix) in worktrees,
e.g. to map some development tools into a subdirectory.
In such a scenario, it is pretty horrible if `git clean -dfx` traverses
into the mapped directory and starts to "clean up".
Let's just not do that. Let's make sure before we traverse into a
directory that it is not a mount point (or junction).
This addresses https://github.com/git-for-windows/git/issues/607
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This addresses:
- CVE-2024-52005:
Insufficient neutralization of ANSI escape sequences in sideband
payload can be used to mislead Git users into believing that
certain remote-generated messages actually originate from Git.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
In some implementations, `regexec_buf()` assumes that it is fed lines;
Without `REG_NOTEOL` it thinks the end of the buffer is the end of a
line. Which makes sense, but trips up this case because we are not
feeding lines, but rather a whole buffer. So the final newline is not
the start of an empty line, but the true end of the buffer.
This causes an interesting bug:
$ echo content >file.txt
$ git grep --no-index -n '^$' file.txt
file.txt:2:
This bug is fixed by making the end of the buffer consistently the end
of the final line.
The patch was applied from
https://lore.kernel.org/git/20250113062601.GD767856@coredump.intra.peff.net/
Reported-by: Olly Betts <olly@survex.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When a Unix socket is initialized, the current directory's path is
stored so that the cleanup code can `chdir()` back to where it was
before exit.
If the path that needs to be stored exceeds the default size of the
`sun_path` attribute of `struct sockaddr_un` (which is defined as a
108-sized byte array on Linux), a larger buffer needs to be allocated so
that it can hold the path, and it is the responsibility of the
`unix_sockaddr_cleanup()` function to release that allocated memory.
In Git's CI, this stack allocation is not necessary because the code is
checked out to `/home/runner/work/git/git`. Concatenate the path
`t/trash directory.t0301-credential-cache/.cache/git/credential/socket`
and a terminating NUL, and you end up with 96 bytes, 12 shy of the
default `sun_path` size.
However, I use worktrees with slightly longer paths:
`/home/me/projects/git/yes/i/nest/worktrees/to/organize/them/` is more
in line with what I have. When I recently tried to locally reproduce a
failure of the `linux-leaks` CI job, this t0301 test failed (where it
had not failed in CI).
The reason: When `credential-cache` tries to reach its daemon initially
by calling `unix_sockaddr_init()`, it is expected that the daemon cannot
be reached (the idea is to spin up the daemon in that case and try
again). However, when this first call to `unix_sockaddr_init()` fails,
the code returns early from the `unix_stream_connect()` function
_without_ giving the cleanup code a chance to run, skipping the
deallocation of above-mentioned path.
The fix is easy: do not return early but instead go directly to the
cleanup code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The preceding two commits introduced special handling of the sideband
channel to neutralize ANSI escape sequences before sending the payload
to the terminal, and `sideband.allowControlCharacters` to override that
behavior.
However, some `pre-receive` hooks that are actively used in practice
want to color their messages and therefore rely on the fact that Git
passes them through to the terminal.
In contrast to other ANSI escape sequences, it is highly unlikely that
coloring sequences can be essential tools in attack vectors that mislead
Git users e.g. by hiding crucial information.
Therefore we can have both: Continue to allow ANSI coloring sequences to
be passed to the terminal, and neutralize all other ANSI escape
sequences.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The preceding commit fixed the vulnerability whereas sideband messages
(that are under the control of the remote server) could contain ANSI
escape sequences that would be sent to the terminal verbatim.
However, this fix may not be desirable under all circumstances, e.g.
when remote servers deliberately add coloring to their messages to
increase their urgency.
To help with those use cases, give users a way to opt-out of the
protections: `sideband.allowControlCharacters`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This happens only when the corresponding commits are not exported in
the current fast-export run. This can happen either when the relevant
commit is already marked, or when the commit is explicitly marked
as UNINTERESTING with a negative ref by another argument.
This breaks fast-export basec remote helpers.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
The output of `git clone` is a vital component for understanding what
has happened when things go wrong. However, these logs are partially
under the control of the remote server (via the "sideband", which
typically contains what the remote `git pack-objects` process sends to
`stderr`), and is currently not sanitized by Git.
This makes Git susceptible to ANSI escape sequence injection (see
CWE-150, https://cwe.mitre.org/data/definitions/150.html), which allows
attackers to corrupt terminal state, to hide information, and even to
insert characters into the input buffer (i.e. as if the user had typed
those characters).
To plug this vulnerability, disallow any control character in the
sideband, replacing them instead with the common `^<letter/symbol>`
(e.g. `^[` for `\x1b`, `^A` for `\x01`).
There is likely a need for more fine-grained controls instead of using a
"heavy hammer" like this, which will be introduced subsequently.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
"git rev-list --maximal-only" has been optimized by borrowing the
logic used by "git show-branch --independent", which computes the
same kind of information much more efficiently.
* ds/rev-list-maximal-only-optim:
rev-list: use reduce_heads() for --maximal-only
p6011: add perf test for rev-list --maximal-only
t6600: test --maximal-only and --independent
"git config list" is the official way to spell "git config -l" and
"git config --list". Use it to update the documentation.
* kh/doc-config-list:
doc: gitcvs-migration: rephrase “man page”
doc: replace git config --list/-l with `list`
Further work to adjust the codebase for C23 that changes functions
like strchr() that discarded constness when they return a pointer into
a const string to preserve constness.
* jk/c23-const-preserving-fixes-more:
git-compat-util: fix CONST_OUTPARAM typo and indentation
refs/files-backend: drop const to fix strchr() warning
http: drop const to fix strstr() warning
range-diff: drop const to fix strstr() warnings
pkt-line: make packet_reader.line non-const
skip_prefix(): check const match between in and out params
pseudo-merge: fix disk reads from find_pseudo_merge()
find_last_dir_sep(): convert inline function to macro
run-command: explicitly cast away constness when assigning to void
pager: explicitly cast away strchr() constness
transport-helper: drop const to fix strchr() warnings
http: add const to fix strchr() warnings
convert: add const to fix strchr() warnings
Originally introduced as `core.useBuiltinFSMonitor` in Git for Windows
and developed, improved and stabilized there, the built-in FSMonitor
only made it into upstream Git (after unnecessarily long hemming and
hawing and throwing overly perfectionist style review sticks into the
spokes) as `core.fsmonitor = true`.
In Git for Windows, with this topic branch, we re-introduce the
now-obsolete config setting, with warnings suggesting to existing users
how to switch to the new config setting, with the intention to
ultimately drop the patch at some stage.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch re-adds the deprecated --stdin/-z options to `git
reset`. Those patches were overridden by a different set of options in
the upstream Git project before we could propose `--stdin`.
We offered this in MinGit to applications that wanted a safer way to
pass lots of pathspecs to Git, and these applications will need to be
adjusted.
Instead of `--stdin`, `--pathspec-from-file=-` should be used, and
instead of `-z`, `--pathspec-file-nul`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A fix for calling `vim` in Windows Terminal caused a regression and was
reverted. We partially un-revert this, to get the fix again.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This patch introduces support to set special NTFS attributes that are
interpreted by the Windows Subsystem for Linux as file mode bits, UID
and GID.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With this patch, Git for Windows works as intended on mounted APFS
volumes (where renaming read-only files would fail).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is the recommended way on GitHub to describe policies revolving around
security issues and about supported versions.
Helped-by: Sven Strickroth <email@cs-ware.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows accepts pull requests; Core Git does not. Therefore we
need to adjust the template (because it only matches core Git's
project management style, not ours).
Also: direct Git for Windows enhancements to their contributions page,
space out the text for easy reading, and clarify that the mailing list
is plain text, not HTML.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These are Git for Windows' Git GUI and gitk patches. We will have to
decide at some point what to do about them, but that's a little lower
priority (as Git GUI seems to be unmaintained for the time being, and
the gitk maintainer keeps a very low profile on the Git mailing list,
too).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Getting started contributing to Git can be difficult on a Windows
machine. CONTRIBUTING.md contains a guide to getting started, including
detailed steps for setting up build tools, running tests, and
submitting patches to upstream.
[includes an example by Pratik Karki how to submit v2, v3, v4, etc.]
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
The Git project followed Git for Windows' lead and added their Code of
Conduct, based on the Contributor Covenant v1.4, later updated to v2.0.
We adapt it slightly to Git for Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The Git for Windows project has grown quite complex over the years,
certainly much more complex than during the first years where the
`msysgit.git` repository was abusing Git for package management purposes
and the `git/git` fork was called `4msysgit.git`.
Let's describe the status quo in a thorough way.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reintroduce the 'core.useBuiltinFSMonitor' config setting (originally added
in 0a756b2a25 (fsmonitor: config settings are repository-specific,
2021-03-05)) after its removal from the upstream version of FSMonitor.
Upstream, the 'core.useBuiltinFSMonitor' setting was rendered obsolete by
"overloading" the 'core.fsmonitor' setting to take a boolean value. However,
several applications (e.g., 'scalar') utilize the original config setting,
so it should be preserved for a deprecation period before complete removal:
* if 'core.fsmonitor' is a boolean, the user is correctly using the new
config syntax; do not use 'core.useBuiltinFSMonitor'.
* if 'core.fsmonitor' is unspecified, use 'core.useBuiltinFSMonitor'.
* if 'core.fsmonitor' is a path, override and use the builtin FSMonitor if
'core.useBuiltinFSMonitor' is 'true'; otherwise, use the FSMonitor hook
indicated by the path.
Additionally, for this deprecation period, advise users to switch to using
'core.fsmonitor' to specify their use of the builtin FSMonitor.
Signed-off-by: Victoria Dye <vdye@github.com>
The `--stdin` option was a well-established paradigm in other commands,
therefore we implemented it in `git reset` for use by Visual Studio.
Unfortunately, upstream Git decided that it is time to introduce
`--pathspec-from-file` instead.
To keep backwards-compatibility for some grace period, we therefore
reinstate the `--stdin` option on top of the `--pathspec-from-file`
option, but mark it firmly as deprecated.
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In e3f7e01b50 (Revert "editor: save and reset terminal after calling
EDITOR", 2021-11-22), we reverted the commit wholesale where the
terminal state would be saved and restored before/after calling an
editor.
The reverted commit was intended to fix a problem with Windows Terminal
where simply calling `vi` would cause problems afterwards.
To fix the problem addressed by the revert, but _still_ keep the problem
with Windows Terminal fixed, let's revert the revert, with a twist: we
restrict the save/restore _specifically_ to the case where `vi` (or
`vim`) is called, and do not do the same for any other editor.
This should still catch the majority of the cases, and will bridge the
time until the original patch is re-done in a way that addresses all
concerns.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Previously, we did not install any handler for Ctrl+C, but now we really
want to because the MSYS2 runtime learned the trick to call the
ConsoleCtrlHandler when Ctrl+C was pressed.
With this, hitting Ctrl+C while `git log` is running will only terminate
the Git process, but not the pager. This finally matches the behavior on
Linux and on macOS.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
