This topic branch allows `add -p` and `add -i` with a large number of
files. It is kind of a hack that was never really meant to be
upstreamed. Let's see if we can do better in the built-in `add -p`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These are Git for Windows' Git GUI and gitk patches. We will have to
decide at some point what to do about them, but that's a little lower
priority (as Git GUI seems to be unmaintained for the time being, and
the gitk maintainer keeps a very low profile on the Git mailing list,
too).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is the branch thicket of patches in Git for Windows that are
considered ready for upstream. To keep them in a ready-to-submit shape,
they are kept as close to the beginning of the branch thicket as
possible.
At the end of the status command, disable and free the fscache so that we
don't leak the memory and so that we can dump the fscache statistics.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Use FindFirstFileExW with FindExInfoBasic to avoid forcing NTFS to look up
the short name. Also switch to a larger (64K vs 4K) buffer using
FIND_FIRST_EX_LARGE_FETCH to minimize round trips to the kernel.
In a repo with ~200K files, this drops warm cache status times from 3.19
seconds to 2.67 seconds for a 16% savings.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
On file systems that support it, this can dramatically speed up operations
like add, commit, describe, rebase, reset, rm that would otherwise have to
lstat() every file to "re-match" the stat information in the index to that
of the file system.
On a synthetic repo with 1M files, "git reset" dropped from 52.02 seconds to
14.42 seconds for a savings of 72%.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
This is retry of #1419.
I added flush_fscache macro to flush cached stats after disk writing
with tests for regression reported in #1438 and #1442.
git checkout checks each file path in sorted order, so cache flushing does not
make performance worse unless we have large number of modified files in
a directory containing many files.
Using chromium repository, I tested `git checkout .` performance when I
delete 10 files in different directories.
With this patch:
TotalSeconds: 4.307272
TotalSeconds: 4.4863595
TotalSeconds: 4.2975562
Avg: 4.36372923333333
Without this patch:
TotalSeconds: 20.9705431
TotalSeconds: 22.4867685
TotalSeconds: 18.8968292
Avg: 20.7847136
I confirmed this patch passed all tests in t/ with core_fscache=1.
Signed-off-by: Takuto Ikuta <tikuta@chromium.org>
When I do git fetch, git call file stats under .git/objects for each
refs. This takes time when there are many refs.
By enabling fscache, git takes file stats by directory traversing and that
improved the speed of fetch-pack for repository having large number of
refs.
In my windows workstation, this improves the time of `git fetch` for
chromium repository like below. I took stats 3 times.
* With this patch
TotalSeconds: 9.9825165
TotalSeconds: 9.1862075
TotalSeconds: 10.1956256
Avg: 9.78811653333333
* Without this patch
TotalSeconds: 15.8406702
TotalSeconds: 15.6248053
TotalSeconds: 15.2085938
Avg: 15.5580231
Signed-off-by: Takuto Ikuta <tikuta@chromium.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Fix regression described in:
https://github.com/git-for-windows/git/issues/1392
which was introduced in:
b2353379bb
Problem Symptoms
================
When the user has a .gitignore file that is a symlink, the fscache
optimization introduced above caused the stat-data from the symlink,
rather that of the target file, to be returned. Later when the ignore
file was read, the buffer length did not match the stat.st_size field
and we called die("cannot use <path> as an exclude file")
Optimization Rationale
======================
The above optimization calls lstat() before open() primarily to ask
fscache if the file exists. It gets the current stat-data as a side
effect essentially for free (since we already have it in memory).
If the file does not exist, it does not need to call open(). And
since very few directories have .gitignore files, we can greatly
reduce time spent in the filesystem.
Discussion of Fix
=================
The above optimization calls lstat() rather than stat() because the
fscache only intercepts lstat() calls. Calls to stat() stay directed
to the mingw_stat() completly bypassing fscache. Furthermore, calls
to mingw_stat() always call {open, fstat, close} so that symlinks are
properly dereferenced, which adds *additional* open/close calls on top
of what the original code in dir.c is doing.
Since the problem only manifests for symlinks, we add code to overwrite
the stat-data when the path is a symlink. This preserves the effect of
the performance gains provided by the fscache in the normal case.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Teach "add" to use preload-index and fscache features
to improve performance on very large repositories.
During an "add", a call is made to run_diff_files()
which calls check_remove() for each index-entry. This
calls lstat(). On Windows, the fscache code intercepts
the lstat() calls and builds a private cache using the
FindFirst/FindNext routines, which are much faster.
Somewhat independent of this, is the preload-index code
which distributes some of the start-up costs across
multiple threads.
We need to keep the call to read_cache() before parsing the
pathspecs (and hence cannot use the pathspecs to limit any preload)
because parse_pathspec() is using the index to determine whether a
pathspec is, in fact, in a submodule. If we would not read the index
first, parse_pathspec() would not error out on a path that is inside
a submodule, and t7400-submodule-basic.sh would fail with
not ok 47 - do not add files from a submodule
We still want the nice preload performance boost, though, so we simply
call read_cache_preload(&pathspecs) after parsing the pathspecs.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Make fscache_enabled() function public rather than static.
Remove unneeded fscache_is_enabled() function.
Change is_fscache_enabled() macro to call fscache_enabled().
is_fscache_enabled() now takes a pathname so that the answer
is more precise and mean "is fscache enabled for this pathname",
since fscache only stores repo-relative paths and not absolute
paths, we can avoid attempting lookups for absolute paths.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Teach read_directory_recursive() and add_excludes() to
be aware of optional fscache and avoid trying to open()
and fstat() non-existant ".gitignore" files in every
directory in the worktree.
The current code in add_excludes() calls open() and then
fstat() for a ".gitignore" file in each directory present
in the worktree. Change that when fscache is enabled to
call lstat() first and if present, call open().
This seems backwards because both lstat needs to do more
work than fstat. But when fscache is enabled, fscache will
already know if the .gitignore file exists and can completely
avoid the IO calls. This works because of the lstat diversion
to mingw_lstat when fscache is enabled.
This reduced status times on a 350K file enlistment of the
Windows repo on a NVMe SSD by 0.25 seconds.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
If multiple threads access a directory that is not yet in the cache, the
directory will be loaded by each thread. Only one of the results is added
to the cache, all others are leaked. This wastes performance and memory.
On cache miss, add a future object to the cache to indicate that the
directory is currently being loaded. Subsequent threads register themselves
with the future object and wait. When the first thread has loaded the
directory, it replaces the future object with the result and notifies
waiting threads.
Signed-off-by: Karsten Blees <blees@dcon.de>
Teach FSCACHE to remember "not found" directories.
This is a performance optimization.
FSCACHE is a performance optimization available for Windows. It
intercepts Posix-style lstat() calls into an in-memory directory
using FindFirst/FindNext. It improves performance on Windows by
catching the first lstat() call in a directory, using FindFirst/
FindNext to read the list of files (and attribute data) for the
entire directory into the cache, and short-cut subsequent lstat()
calls in the same directory. This gives a major performance
boost on Windows.
However, it does not remember "not found" directories. When STATUS
runs and there are missing directories, the lstat() interception
fails to find the parent directory and simply return ENOENT for the
file -- it does not remember that the FindFirst on the directory
failed. Thus subsequent lstat() calls in the same directory, each
re-attempt the FindFirst. This completely defeats any performance
gains.
This can be seen by doing a sparse-checkout on a large repo and
then doing a read-tree to reset the skip-worktree bits and then
running status.
This change reduced status times for my very large repo by 60%.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Checking the work tree status is quite slow on Windows, due to slow
`lstat()` emulation (git calls `lstat()` once for each file in the
index). Windows operating system APIs seem to be much better at scanning
the status of entire directories than checking single files.
Add an `lstat()` implementation that uses a cache for lstat data. Cache
misses read the entire parent directory and add it to the cache.
Subsequent `lstat()` calls for the same directory are served directly
from the cache.
Also implement `opendir()`/`readdir()`/`closedir()` so that they create
and use directory listings in the cache.
The cache doesn't track file system changes and doesn't plug into any
modifying file APIs, so it has to be explicitly enabled for git functions
that don't modify the working copy.
Note: in an earlier version of this patch, the cache was always active and
tracked file system changes via ReadDirectoryChangesW. However, this was
much more complex and had negative impact on the performance of modifying
git commands such as 'git checkout'.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Add a macro to mark code sections that only read from the file system,
along with a config option and documentation.
This facilitates implementation of relatively simple file system level
caches without the need to synchronize with the file system.
Enable read-only sections for 'git status' and preload_index.
Signed-off-by: Karsten Blees <blees@dcon.de>
Emulating the POSIX lstat API on Windows via GetFileAttributes[Ex] is quite
slow. Windows operating system APIs seem to be much better at scanning the
status of entire directories than checking single files. A caching
implementation may improve performance by bulk-reading entire directories
or reusing data obtained via opendir / readdir.
Make the lstat implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Emulating the POSIX `dirent` API on Windows via
`FindFirstFile()`/`FindNextFile()` is pretty staightforward, however,
most of the information provided in the `WIN32_FIND_DATA` structure is
thrown away in the process. A more sophisticated implementation may
cache this data, e.g. for later reuse in calls to `lstat()`.
Make the `dirent` implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Define a base DIR structure with pointers to `readdir()`/`closedir()`
that match the `opendir()` implementation (similar to vtable pointers in
Object-Oriented Programming). Define `readdir()`/`closedir()` so that
they call the function pointers in the `DIR` structure. This allows to
choose the `opendir()` implementation on a call-by-call basis.
Make the fixed-size `dirent.d_name` buffer a flex array, as `d_name` may
be implementation specific (e.g. a caching implementation may allocate a
`struct dirent` with _just_ the size needed to hold the `d_name` in
question).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We will use them in the upcoming "FSCache" patches (to accelerate
sequential lstat() calls).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These changes are necessary to support better Git for Windows' new
auto-update feature.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When using remotes (with git-flow especially), the remote reference names
are almost always wordwrapped in the "list references" window because it's
somewhat narrow by default. It's possible to resize it with a mouse,
but it's annoying to have to do this every time, especially on Windows 10,
where the window border seems to be only one (1) pixel wide, thus making
the grabbing of the window border tricky.
Signed-off-by: James J. Raden <james.raden@gmail.com>
Tcl/Tk 8.6 introduced new events for the cursor left/right keys and
apparently changed the behavior of the previous event.
Let's work around that by using the new events when we are running with
Tcl/Tk 8.6 or later.
This fixes https://github.com/git-for-windows/git/issues/495
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Since v2.9.0, Git knows about the config variable core.hookspath
that allows overriding the path to the directory containing the
Git hooks.
Since v2.10.0, the `--git-path` option respects that config
variable, too, so we may just as well use that command.
For Git versions older than v2.5.0 (which was the first version to
support the `--git-path` option for the `rev-parse` command), we
simply fall back to the previous code.
This fixes https://github.com/git-for-windows/git/issues/1755
Initial-patch-by: Philipp Gortan <philipp@gortan.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows now ships with the new Git icon from git-scm.com. Use that
icon file if it exists instead of the old procedurally drawn one.
This patch was sent upstream but so far no decision on its inclusion was
made, so commit it to our fork.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
"Question?" is maybe not the most informative thing to ask. In the
absence of better information, it is the best we can do, of course.
However, Git for Windows' auto updater just learned the trick to use
git-gui--askyesno to ask the user whether to update now or not. And in
this scripted scenario, we can easily pass a command-line option to
change the window title.
So let's support that with the new `--title <title>` option.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Assumes file names in git tree objects are UTF-8 encoded.
On most unix systems, the system encoding (and thus the TCL system
encoding) will be UTF-8, so file names will be displayed correctly.
On Windows, it is impossible to set the system encoding to UTF-8.
Changing the TCL system encoding (via 'encoding system ...', e.g. in the
startup code) is explicitly discouraged by the TCL docs.
Change gitk functions dealing with file names to always convert
from and to UTF-8.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The text wrapping seems to be aligned to the right side of the Yes
button, leaving an awful lot of empty space.
Let's try to counter this by using pixel units.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Make use of the new environment variable GIT_ASK_YESNO to support the
recently implemented fallback in case unlink, rename or rmdir fail for
files in use on Windows. The added dialog will present a yes/no question
to the the user which will currently be used by the windows compat layer
to let the user retry a failed file operation.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
