This simplifies the workflow dramatically.
Note that we have to reinstate that `/usr/bin/git` hack (a shell script
that simply redirects to `/mingw64/bin/git.exe`) in the `pkg` job
manually, since we no longer cache the `build-installers` artifact
_after_ installing that hack in `bundle-artifacts`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We cannot just check out the current revision: The user might have
overridden `REPOSITORY` and `REF` via the workflow dispatch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This workflow needs to be triggered manually, and it offers to specify a
couple input parameters. But none of them are required. Make that
explicit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When the user asked for `installer-x86_64`, there is no point in
building `pkg-i686` or `build-arm64`; Let's be a bit smarter about this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The workflow allows users to restrict what parts are being built. For
example, `installer-i686` will build only the 32-bit installer, not the
64-bit one nor any MinGit flavor.
However, this logic was not extended when introducing support for ARM64:
Instead, we _also_ built the ARM64 installer when the user asked for
`installer-i686`.
Let's allow restricting to `installer-i686` _without_ building the ARM64
version, and allow restricting to `installer-arm64` _just_ for the ARM64
version.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
GitHub workflows run in agents that have quite a bit of stuff in their
`PATH`, e.g. Chocolatey. To make sure that those bits and pieces are
_not_ used to build the artifacts, let's whittle down the `PATH` to
contain the bare minimum.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The archive and MinGit variants really get bloated because they handle
those as straight copies instead of hard-links.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When building the Pacman packages, we technically do not need the full
`build-installers` artifact (which is substantially larger than the
`makepkg-git` artifact). However, the former is already cached and
includes the latter's files. And it is _so_ much faster to download the
cached (larger) artifact than to download the smaller `makepkg-git`
artifact from Azure Pipelines.
Suggested-by: Dennis Ameling <dennis@dennisameling.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It is a bit expensive to fetch just the git-sdk-64-build-installers
artifact from Azure Pipelines and then to unpack it (takes some 6-7
minutes, typically). Let's cache it if possible.
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With this change, users can specify the branch and repository from which
they want to build Git for Windows' artifacts, via the `ref` and
`repository` inputs.
This allows e.g. building `refs/heads/seen` of `git/git` (even if no
`git-artifacts` workflow is configured in that repository), or
`refs/pull/<number>/merge` for a given Pull Request.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Users can now specify which artifacts they want to build, via the
`build_only` input, which is a space-separated list of artifacts. For
example, `installer portable` will build `installer-x86_64`,
`installer-i686`, `portable-x86_64` and `portable-i686`, and an empty or
unset value will build all artifacts.
Please note that the `mingw-w64-git` packages are built always, as it
would be tricky to figure out when they need to be built (for example,
`build_only=portable-x86_64` technically does not need `pkg-i686` to be
built, while `build_only=portable` does).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The two NuGet artifact exists only in the 64-bit version. So let's make
them in a separate, non-matrix job.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When the secrets `CODESIGN_P12` and `CODESIGN_PASS` are set, the
workflow will now code-sign the `.exe` files contained in the package.
This should help with a few anti-malware programs, at least when the
certificate saw some action and gained trust.
Note: `CODESIGN_P12` needs to be generated via
cat <certificate>.p12 | base64 | tr '\n' %
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This expects the `GPGKEY` and `PRIVGPGKEY` secrets to be set in the
respective GitHub repository.
The `GPGKEY` value should be of the form
<short-key> --passphrase <pass> --yes --batch --no-tty --pinentry-mode loopback --digest-algo SHA256
and the `PRIVGPGKEY` should be generated via
gpg --export-secret-keys | base64 | tr '\n' %
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows uses MSYS2 as base system, and therefore the Git
binaries are bundled as Pacman package.
This workflow allows building the 64-bit version of this package (which
is called `mingw-w64-x86_64-git`).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
"git worktree list --porcelain" did not c-quote pathnames and lock
reasons with unsafe bytes correctly, which is worked around by
introducing NUL terminated output format with "-z".
* pw/worktree-list-with-z:
worktree: add -z option for list subcommand
Built-in fsmonitor (part 2).
* jh/builtin-fsmonitor-part2: (30 commits)
t7527: test status with untracked-cache and fsmonitor--daemon
fsmonitor: force update index after large responses
fsmonitor--daemon: use a cookie file to sync with file system
fsmonitor--daemon: periodically truncate list of modified files
t/perf/p7519: add fsmonitor--daemon test cases
t/perf/p7519: speed up test on Windows
t/perf/p7519: fix coding style
t/helper/test-chmtime: skip directories on Windows
t/perf: avoid copying builtin fsmonitor files into test repo
t7527: create test for fsmonitor--daemon
t/helper/fsmonitor-client: create IPC client to talk to FSMonitor Daemon
help: include fsmonitor--daemon feature flag in version info
fsmonitor--daemon: implement handle_client callback
compat/fsmonitor/fsm-listen-darwin: implement FSEvent listener on MacOS
compat/fsmonitor/fsm-listen-darwin: add MacOS header files for FSEvent
compat/fsmonitor/fsm-listen-win32: implement FSMonitor backend on Windows
fsmonitor--daemon: create token-based changed path cache
fsmonitor--daemon: define token-ids
fsmonitor--daemon: add pathname classification
fsmonitor--daemon: implement 'start' command
...
Give hint when branch tracking cannot be established because fetch
refspecs from multiple remote repositories overlap.
* tk/ambiguous-fetch-refspec:
tracking branches: add advice to ambiguous refspec error
"git fetch --refetch" learned to fetch everything without telling
the other side what we already have, which is useful when you
cannot trust what you have in the local object store.
* rc/fetch-refetch:
docs: mention --refetch fetch option
fetch: after refetch, encourage auto gc repacking
t5615-partial-clone: add test for fetch --refetch
fetch: add --refetch option
builtin/fetch-pack: add --refetch option
fetch-pack: add refetch
fetch-negotiator: add specific noop initializer
"git am" can read from the standard input when no mailbox is given
on the command line, but the end-user gets no indication when it
happens, making Git appear stuck.
* jc/mailsplit-warn-on-tty:
am/apply: warn if we end up reading patches from terminal
A handful of obvious clean-ups around a topic that is already in
'master'.
* gc/branch-recurse-submodules-fix:
branch.c: simplify advice-and-die sequence
branch: rework comments for future developers
branch: remove negative exit code
branch --set-upstream-to: be consistent when advising
branch: give submodule updating advice before exit
branch: support more tracking modes when recursing
When creating a loose object file, we didn't report the exact
filename of the file we failed to fsync, even though the
information was readily available, which has been corrected.
* ns/fsync-or-die-message-fix:
object-file: pass filename to fsync_or_die
A couple of fix-up to a topic that is now in 'master'.
* ns/core-fsyncmethod:
core.fsyncmethod: correctly camel-case warning message
core.fsync: fix incorrect expression for default configuration
Work around AIX C compiler that does not seem to grok
initialization of a union member of a struct.
* ab/reftable-aix-xlc-12:
reftable: make assignments portable to AIX xlc v12.01
Move more "git submodule update" to C.
* gc/submodule-update-part2:
submodule--helper: remove forward declaration
submodule: move core cmd_update() logic to C
submodule--helper: reduce logic in run_update_procedure()
submodule--helper: teach update_data more options
builtin/submodule--helper.c: rename option struct to "opt"
submodule update: use die_message()
submodule--helper: run update using child process struct
Code clean-up.
* ds/partial-bundle-more:
pack-objects: lazily set up "struct rev_info", don't leak
bundle: output hash information in 'verify'
bundle: move capabilities to end of 'verify'
pack-objects: parse --filter directly into revs.filter
pack-objects: move revs out of get_object_list()
list-objects-filter: remove CL_ARG__FILTER
"git ls-tree" learns "--oid-only" option, similar to "--name-only",
and more generalized "--format" option.
* tl/ls-tree-oid-only:
ls-tree: split up "fast path" callbacks
ls-tree: detect and error on --name-only --name-status
ls-tree: support --object-only option for "git-ls-tree"
ls-tree: introduce "--format" option
cocci: allow padding with `strbuf_addf()`
ls-tree: introduce struct "show_tree_data"
ls-tree: slightly refactor `show_tree()`
ls-tree: fix "--name-only" and "--long" combined use bug
ls-tree: simplify nesting if/else logic in "show_tree()"
ls-tree: rename "retval" to "recurse" in "show_tree()"
ls-tree: use "size_t", not "int" for "struct strbuf"'s "len"
ls-tree: use "enum object_type", not {blob,tree,commit}_type
ls-tree: add missing braces to "else" arms
ls-tree: remove commented-out code
ls-tree tests: add tests for --name-status
"git reflog" command now uses parse-options API to parse its
command line options.
* ab/reflog-parse-options:
reflog: fix 'show' subcommand's argv
reflog [show]: display sensible -h output
reflog: convert to parse_options() API
reflog exists: use parse_options() API
git reflog [expire|delete]: make -h output consistent with SYNOPSIS
reflog: move "usage" variables and use macros
reflog tests: add missing "git reflog exists" tests
reflog: refactor cmd_reflog() to "if" branches
reflog.c: indent argument lists
The error "not tracking: ambiguous information for ref" is raised
when we are evaluating what tracking information to set on a branch,
and find that the ref to be added as tracking branch is mapped
under multiple remotes' fetch refspecs.
This can easily happen when a user copy-pastes a remote definition
in their git config, and forgets to change the tracking path.
Add advice in this situation, explicitly highlighting which remotes
are involved and suggesting how to correct the situation. Also
update a test to explicitly expect that advice.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the dwim_branch_start(), when we cannot find an appropriate
upstream, we will die with the same message anyway, whether we
issue an advice message.
Flip the code around a bit and simplify the flow using
advise_if_enabled() function.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For two cases in which we do not explicitly pass --track=<choice>
option down to the submodule--helper subprocess, we have comments
that say "we do not have to pass --track", but in fact we not just
do not have to, but it would be incorrect to pass any --track option
to the subprocess (instead, the correct behaviour is to let the
subprocess figure out what is the appropriate tracking mode to use).
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/usage-die-message:
config API: use get_error_routine(), not vreportf()
usage.c + gc: add and use a die_message_errno()
gc: return from cmd_gc(), don't call exit()
usage.c API users: use die_message() for error() + exit 128
usage.c API users: use die_message() for "fatal :" + exit 128
usage.c: add a die_message() routine
Add a -z option to be used in conjunction with --porcelain that gives
NUL-terminated output. As 'worktree list --porcelain' does not quote
worktree paths this enables it to handle worktree paths that contain
newlines.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We raised the weather balloon to see if we can allow the construct
in 44ba10d6 (revision: use C99 declaration of variable in for()
loop, 2021-11-14), which was shipped as a part of Git v2.35.
Document that fact in the coding guidelines, and more importantly,
give ourselves a deadline to revisit and update.
Let's declare that we will officially adopt the variable declaration
in the initializaiton part of "for ()" statement this winter, unless
we find that a platform we care about does not grok it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update tests around the use of hook scripts.
* ab/hook-tests-updates:
http tests: use "test_hook" for "smart" and "dumb" http tests
proc-receive hook tests: use "test_hook" instead of "write_script"
tests: extend "test_hook" for "rm" and "chmod -x", convert "$HOOK"
tests: use "test_hook" for misc "mkdir -p" and "chmod" cases
tests: change "mkdir -p && write_script" to use "test_hook"
tests: change "cat && chmod +x" to use "test_hook"
gc + p4 tests: use "test_hook", remove sub-shells
fetch+push tests: use "test_hook" and "test_when_finished" pattern
bugreport tests: tighten up "git bugreport -s hooks" test
tests: assume the hooks are disabled by default
http tests: don't rely on "hook/post-update.sample"
hook tests: turn exit code assertions into a loop
test-lib-functions: add and use a "test_hook" wrapper
Tweaks in the command line prompt (in contrib/) code around its
GIT_PS1_SHOWUPSTREAM feature.
* jd/prompt-upstream-mark:
git-prompt: put upstream comments together
git-prompt: make long upstream state indicator consistent
git-prompt: make upstream state indicator location consistent
git-prompt: rename `upstream` to `upstream_type`
Finishing touches to C rewrite of "git add -i" in single-key
interactive mode.
* pw/add-p-single-key:
terminal: restore settings on SIGTSTP
terminal: work around macos poll() bug
terminal: don't assume stdin is /dev/tty
terminal: use flags for save_term()
