This patch introduces support to set special NTFS attributes that are
interpreted by the Windows Subsystem for Linux as file mode bits, UID
and GID.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With this patch, Git for Windows works as intended on mounted APFS
volumes (where renaming read-only files would fail).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These are Git for Windows' Git GUI and gitk patches. We will have to
decide at some point what to do about them, but that's a little lower
priority (as Git GUI seems to be unmaintained for the time being, and
the gitk maintainer keeps a very low profile on the Git mailing list,
too).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The Windows Subsystem for Linux (WSL) version 2 allows to use `chmod` on
NTFS volumes provided that they are mounted with metadata enabled (see
https://devblogs.microsoft.com/commandline/chmod-chown-wsl-improvements/
for details), for example:
$ chmod 0755 /mnt/d/test/a.sh
In order to facilitate better collaboration between the Windows
version of Git and the WSL version of Git, we can make the Windows
version of Git also support reading and writing NTFS file modes
in a manner compatible with WSL.
Since this slightly slows down operations where lots of files are
created (such as an initial checkout), this feature is only enabled when
`core.WSLCompat` is set to true. Note that you also have to set
`core.fileMode=true` in repositories that have been initialized without
enabling WSL compatibility.
There are several ways to enable metadata loading for NTFS volumes
in WSL, one of which is to modify `/etc/wsl.conf` by adding:
```
[automount]
enabled = true
options = "metadata,umask=027,fmask=117"
```
And reboot WSL.
It can also be enabled temporarily by this incantation:
$ sudo umount /mnt/c &&
sudo mount -t drvfs C: /mnt/c -o metadata,uid=1000,gid=1000,umask=22,fmask=111
It's important to note that this modification is compatible with, but
does not depend on WSL. The helper functions in this commit can operate
independently and functions normally on devices where WSL is not
installed or properly configured.
Signed-off-by: xungeng li <xungeng@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The Makefile target `install-mingit-test-artifacts` simply copies stuff
and things directly into a MinGit directory, including an init.bat
script to set everything up so that the tests can be run in a cmd
window.
Sadly, Git's test suite still relies on a Perl interpreter even if
compiled with NO_PERL=YesPlease. We punt for now, installing a small
script into /usr/bin/perl that hands off to an existing Perl of a Git
for Windows SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, the current working directory is pretty much guaranteed to
contain a colon. If we feed that path to CVS, it mistakes it for a
separator between host and port, though.
This has not been a problem so far because Git for Windows uses MSYS2's
Bash using a POSIX emulation layer that also pretends that the current
directory is a Unix path (at least as long as we're in a shell script).
However, that is rather limiting, as Git for Windows also explores other
ports of other Unix shells. One of those is BusyBox-w32's ash, which is
a native port (i.e. *not* using any POSIX emulation layer, and certainly
not emulating Unix paths).
So let's just detect if there is a colon in $PWD and punt in that case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows uses MSYS2's Bash to run the test suite, which comes
with benefits but also at a heavy price: on the plus side, MSYS2's
POSIX emulation layer allows us to continue pretending that we are on a
Unix system, e.g. use Unix paths instead of Windows ones, yet this is
bought at a rather noticeable performance penalty.
There *are* some more native ports of Unix shells out there, though,
most notably BusyBox-w32's ash. These native ports do not use any POSIX
emulation layer (or at most a *very* thin one, choosing to avoid
features such as fork() that are expensive to emulate on Windows), and
they use native Windows paths (usually with forward slashes instead of
backslashes, which is perfectly legal in almost all use cases).
And here comes the problem: with a $PWD looking like, say,
C:/git-sdk-64/usr/src/git/t/trash directory.t5813-proto-disable-ssh
Git's test scripts get quite a bit confused, as their assumptions have
been shattered. Not only does this path contain a colon (oh no!), it
also does not start with a slash.
This is a problem e.g. when constructing a URL as t5813 does it:
ssh://remote$PWD. Not only is it impossible to separate the "host" from
the path with a $PWD as above, even prefixing $PWD by a slash won't
work, as /C:/git-sdk-64/... is not a valid path.
As a workaround, detect when $PWD does not start with a slash on
Windows, and simply strip the drive prefix, using an obscure feature of
Windows paths: if an absolute Windows path starts with a slash, it is
implicitly prefixed by the drive prefix of the current directory. As we
are talking about the current directory here, anyway, that strategy
works.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When t5605 tries to verify that files are hardlinked (or that they are
not), it uses the `-links` option of the `find` utility.
BusyBox' implementation does not support that option, and BusyBox-w32's
lstat() does not even report the number of hard links correctly (for
performance reasons).
So let's just switch to a different method that actually works on
Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
While it may seem super convenient to some old Unix hands to simpy
require Perl to be available when running the test suite, this is a
major hassle on Windows, where we want to verify that Perl is not,
actually, required in a NO_PERL build.
As a super ugly workaround, we "install" a script into /usr/bin/perl
reading like this:
#!/bin/sh
# We'd much rather avoid requiring Perl altogether when testing
# an installed Git. Oh well, that's why we cannot have nice
# things.
exec c:/git-sdk-64/usr/bin/perl.exe "$@"
The problem with that is that BusyBox assumes that the #! line in a
script refers to an executable, not to a script. So when it encounters
the line #!/usr/bin/perl in t5532's proxy-get-cmd, it barfs.
Let's help this situation by simply executing the Perl script with the
"interpreter" specified explicitly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
At some stage, t5003-archive-zip wants to add a file that is not ASCII.
To that end, it uses /bin/sh. But that file may actually not exist (it
is too easy to forget that not all the world is Unix/Linux...)! Besides,
we already have perfectly fine binary files intended for use solely by
the tests. So let's use one of them instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When running with BusyBox, we will want to avoid calling executables on
the PATH that are implemented in BusyBox itself.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The -W option is only understood by MSYS2 Bash's pwd command. We already
make sure to override `pwd` by `builtin pwd -W` for MINGW, so let's not
double the effort here.
This will also help when switching the shell to another one (such as
BusyBox' ash) whose pwd does *not* understand the -W option.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Traditionally, Git for Windows' SDK uses Bash as its default shell.
However, other Unix shells are available, too. Most notably, the Win32
port of BusyBox comes with `ash` whose `pwd` command already prints
Windows paths as Git for Windows wants them, while there is not even a
`builtin` command.
Therefore, let's be careful not to override `pwd` unless we know that
the `builtin` command is available.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
BusyBox-w32 is a true Win32 application, i.e. it does not come with a
POSIX emulation layer.
That also means that it does *not* use the Unix convention of separating
the entries in the PATH variable using colons, but semicolons.
However, there are also BusyBox ports to Windows which use a POSIX
emulation layer such as Cygwin's or MSYS2's runtime, i.e. using colons
as PATH separators.
As a tell-tale, let's use the presence of semicolons in the PATH
variable: on Unix, it is highly unlikely that it contains semicolons,
and on Windows (without POSIX emulation), it is virtually guaranteed, as
everybody should have both $SYSTEMROOT and $SYSTEMROOT/system32 in their
PATH.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The idea is to allow running the test suite on MinGit with BusyBox
installed in /mingw64/bin/sh.exe. In that case, we will want to exclude
sort & find (and other Unix utilities) from being bundled.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We already have a directory where we store files intended for use by
multiple test scripts. The same directory is a better home for the
test-binary-*.png files than t/.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
To verify that the symlink is resolved correctly, we use the fact that
`git.exe` is a native Win32 program, and that `git.exe config -f <path>`
therefore uses the native symlink resolution.
Signed-off-by: Bert Belder <bertbelder@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
At least on _some_ APFS network shares, Git fails to rename the object
files because they are marked as read-only, because that has the effect
of setting the uchg flag on APFS, which then means the file can't be
renamed or deleted.
To work around that, when a rename failed, and the read-only flag is
set, try to turn it off and on again.
This fixes https://github.com/git-for-windows/git/issues/4482
Signed-off-by: David Lomas <dl3@pale-eds.co.uk>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
... even if they may look like them.
As looking up the target of the "symbolic link" (just to see whether it
starts with `/ContainerMappedDirectories/`) is pretty expensive, we
do it when we can be *really* sure that there is a possibility that this
might be the case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: JiSeop Moon <zcube@zcube.kr>
On Windows, symbolic links have a type: a "file symlink" must point at
a file, and a "directory symlink" must point at a directory. If the
type of symlink does not match its target, it doesn't work.
Git does not record the type of symlink in the index or in a tree. On
checkout it'll guess the type, which only works if the target exists
at the time the symlink is created. This may often not be the case,
for example when the link points at a directory inside a submodule.
By specifying `symlink=file` or `symlink=dir` the user can specify what
type of symlink Git should create, so Git doesn't have to rely on
unreliable heuristics.
Signed-off-by: Bert Belder <bertbelder@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It is convenient to assume that everybody who wants to build & test Git
has access to a working `iconv` executable (after all, we already pretty
much require libiconv).
However, that limits esoteric test scenarios such as Git for Windows',
where an end user installation has to ship with `iconv` for the sole
purpose of being testable. That payload serves no other purpose.
So let's just have a test helper (to be able to test Git, the test
helpers have to be available, after all) to act as `iconv` replacement.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, symbolic links actually have a type depending on the target:
it can be a file or a directory.
In certain circumstances, this poses problems, e.g. when a symbolic link
is supposed to point into a submodule that is not checked out, so there
is no way for Git to auto-detect the type.
To help with that, we will add support over the course of the next
commits to specify that symlink type via the Git attributes. This
requires an index_state, though, something that Git for Windows'
`symlink()` replacement cannot know about because the function signature
is defined by the POSIX standard and not ours to change.
So let's introduce a helper function to create symbolic links that
*does* know about the index_state.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It is a bit strange, and even undesirable, to require Perl just to run
the test suite even when NO_PERL was set.
This patch does not fix this problem by any stretch of imagination.
However, it fixes *the* Perl invocation that *every single* test script
has to run.
While at it, it makes the source code also more grep'able, as the code
that unsets some, but not all, GIT_* environment variables just became a
*lot* more explicit. And all that while still reducing the total number
of lines.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
BusyBox comes with a ton of applets ("applet" being the identical
concept to Git's "builtins"). And similar to Git's builtins, the applets
can be called via `busybox <command>`, or the BusyBox executable can be
copied/hard-linked to the command name.
The similarities do not end here. Just as with Git's builtins, it is
problematic that BusyBox' hard-linked applets cannot easily be put into
a .zip file: .zip archives have no concept of hard-links and therefore
would store identical copies (and also extract identical copies,
"inflating" the archive unnecessarily).
To counteract that issue, MinGit already ships without hard-linked
copies of the builtins, and the plan is to do the same with BusyBox'
applets: simply ship busybox.exe as single executable, without
hard-linked applets.
To accommodate that, Git is being taught by this commit a very special
trick, exploiting the fact that it is possible to call an executable
with a command-line whose argv[0] is different from the executable's
name: when `sh` is to be spawned, and no `sh` is found in the PATH, but
busybox.exe is, use that executable (with unchanged argv).
Likewise, if any executable to be spawned is not on the PATH, but
busybox.exe is found, parse the output of `busybox.exe --help` to find
out what applets are included, and if the command matches an included
applet name, use busybox.exe to execute it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The main idea of this patch is that even if we have to look up the
absolute path of the script, if only the basename was specified as
argv[0], then we should use that basename on the command line, too, not
the absolute path.
This patch will also help with the upcoming patch where we automatically
substitute "sh ..." by "busybox sh ..." if "sh" is not in the PATH but
"busybox" is: we will do that by substituting the actual executable, but
still keep prepending "sh" to the command line.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In https://github.com/git-for-windows/git/pull/2637, we fixed a bug
where symbolic links' target path sizes were recorded incorrectly in the
index. The downside of this fix was that every user with tracked
symbolic links in their checkouts would see them as modified in `git
status`, but not in `git diff`, and only a `git add <path>` (or `git add
-u`) would "fix" this.
Let's do better than that: we can detect that situation and simply
pretend that a symbolic link with a known bad size (or a size that just
happens to be that bad size, a _very_ unlikely scenario because it would
overflow our buffers due to the trailing NUL byte) means that it needs
to be re-checked as if we had just checked it out.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In preparation for making this function a bit more complicated (to allow
for special-casing the `ContainerMappedDirectories` in Windows
containers, which look like a symbolic link, but are not), let's move it
out of the header.
Signed-off-by: JiSeop Moon <zcube@zcube.kr>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When creating directories via `safe_create_leading_directories()`, we
might encounter an already-existing directory which is not
readable by the current user. To handle that situation, Git's code calls
`stat()` to determine whether we're looking at a directory.
In such a case, `CreateFile()` will fail, though, no matter what, and
consequently `mingw_stat()` will fail, too. But POSIX semantics seem to
still allow `stat()` to go forward.
So let's call `mingw_lstat()` for the rescue if we fail to get a file
handle due to denied permission in `mingw_stat()`, and fill the stat
info that way.
We need to be careful to not allow this to go forward in case that we're
looking at a symbolic link: to resolve the link, we would still have to
create a file handle, and we just found out that we cannot. Therefore,
`stat()` still needs to fail with `EACCES` in that case.
This fixes https://github.com/git-for-windows/git/issues/2531.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It is a known issue that a rename() can fail with an "Access denied"
error at times, when copying followed by deleting the original file
works. Let's just fall back to that behavior.
Signed-off-by: JiSeop Moon <zcube@zcube.kr>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With Windows 10 Build 14972 in Developer Mode, a new flag is supported
by CreateSymbolicLink() to create symbolic links even when running
outside of an elevated session (which was previously required).
This new flag is called SYMBOLIC_LINK_FLAG_ALLOW_UNPRIVILEGED_CREATE and
has the numeric value 0x02.
Previous Windows 10 versions will not understand that flag and return an
ERROR_INVALID_PARAMETER, therefore we have to be careful to try passing
that flag only when the build number indicates that it is supported.
For more information about the new flag, see this blog post:
https://blogs.windows.com/buildingapps/2016/12/02/symlinks-windows-10/
This patch is loosely based on the patch submitted by Samuel D. Leslie
as https://github.com/git-for-windows/git/pull/1184.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This will come in handy in the next commit.
Signed-off-by: JiSeop Moon <zcube@zcube.kr>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Symlinks on Windows have a flag that indicates whether the target is a file
or a directory. Symlinks of wrong type simply don't work. This even affects
core Win32 APIs (e.g. DeleteFile() refuses to delete directory symlinks).
However, CreateFile() with FILE_FLAG_BACKUP_SEMANTICS doesn't seem to care.
Check the target type by first creating a tentative file symlink, opening
it, and checking the type of the resulting handle. If it is a directory,
recreate the symlink with the directory flag set.
It is possible to create symlinks before the target exists (or in case of
symlinks to symlinks: before the target type is known). If this happens,
create a tentative file symlink and postpone the directory decision: keep
a list of phantom symlinks to be processed whenever a new directory is
created in mingw_mkdir().
Limitations: This algorithm may fail if a link target changes from file to
directory or vice versa, or if the target directory is created in another
process.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Implement symlink() that always creates file symlinks. Fails with ENOSYS
if symlinks are disabled or unsupported.
Note: CreateSymbolicLinkW() was introduced with symlink support in Windows
Vista. For compatibility with Windows XP, we need to load it dynamically
and fail gracefully if it isnt's available.
Signed-off-by: Karsten Blees <blees@dcon.de>
This commit fixes mingw_lstat by computing the proper size for symlinks
according to POSIX. POSIX specifies that upon successful return from
lstat: "the value of the st_size member shall be set to the length of
the pathname contained in the symbolic link not including any
terminating null byte".
Prior to this commit the mingw_lstat function returned a fixed size of
4096. This caused problems in git repositories that were accessed by
git for Cygwin or git for WSL. For example, doing `git reset --hard`
using git for Windows would update the size of symlinks in the index
to be 4096; at a later time git for Cygwin or git for WSL would find
that symlinks have changed size during `git status`. Vice versa doing
`git reset --hard` in git for Cygwin or git for WSL would update the
size of symlinks in the index with the correct value, only for git for
Windows to find incorrectly at a later time that the size had changed.
Signed-off-by: Bill Zissimopoulos <billziss@navimatics.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Implement readlink() by reading NTFS reparse points. Works for symlinks
and directory junctions. If symlinks are disabled, fail with ENOSYS.
Signed-off-by: Karsten Blees <blees@dcon.de>
If symlinks are enabled, resolve all symlinks when changing directories,
as required by POSIX.
Note: Git's real_path() function bases its link resolution algorithm on
this property of chdir(). Unfortunately, the current directory on Windows
is limited to only MAX_PATH (260) characters. Therefore using symlinks and
long paths in combination may be problematic.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
MSVCRT's _wrename() cannot rename symlinks over existing files: it returns
success without doing anything. Newer MSVCR*.dll versions probably do not
have this problem: according to CRT sources, they just call MoveFileEx()
with the MOVEFILE_COPY_ALLOWED flag.
Get rid of _wrename() and call MoveFileEx() with proper error handling.
Signed-off-by: Karsten Blees <blees@dcon.de>
_wunlink() / DeleteFileW() refuses to delete symlinks to directories. If
_wunlink() fails with ERROR_ACCESS_DENIED, try _wrmdir() as well.
Signed-off-by: Karsten Blees <blees@dcon.de>
