When an interactive rebase is interrupted, the user may stage changes
before continuing, and we need to commit those changes in that case.
Please note that the nested "if" added to the sequencer_continue() is
not combined into a single "if" because it will be extended with an
"else" clause in a later patch in this patch series.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When the interactive rebase aborts, it writes out an author-script file
to record the author information for the current commit. As we are about
to teach the sequencer how to perform the actions behind an interactive
rebase, it needs to write those author-script files, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
For users' convenience, most rebase commands can be abbreviated, e.g.
'p' instead of 'pick' and 'x' instead of 'exec'. Let's teach the
sequencer to handle those abbreviated commands just fine.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is a huge patch, and at the same time a huge step forward to
execute the performance-critical parts of the interactive rebase in a
builtin command.
Since 'fixup' and 'squash' are not only similar, but also need to know
about each other (we want to reduce a series of fixups/squashes into a
single, final commit message edit, from the user's point of view), we
really have to implement them both at the same time.
Most of the actual work is done by the existing code path that already
handles the "pick" and the "edit" commands; We added support for other
features (e.g. to amend the commit message) in the patches leading up to
this one, yet there are still quite a few bits in this patch that simply
would not make sense as individual patches (such as: determining whether
there was anything to "fix up" in the "todo" script, etc).
In theory, it would be possible to reuse the fast-forward code path also
for the fixup and the squash code paths, but in practice this would make
the code less readable. The end result cannot be fast-forwarded anyway,
therefore let's just extend the cherry-picking code path for now.
Since the sequencer parses the entire `git-rebase-todo` script in one go,
fixup or squash commands without a preceding pick can be reported early
(in git-rebase--interactive, we could only report such errors just before
executing the fixup/squash).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In the interactive rebase, commands that were successfully processed are
not simply discarded, but appended to the 'done' file instead. This is
used e.g. to display the current state to the user in the output of
`git status` or the progress.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When calling `git rebase -i -v`, the user wants to see some statistics
after the commits were rebased. Let's show some.
The strbuf we use to perform that task will be used for other things
in subsequent commits, hence it is declared and initialized in a wider
scope than strictly needed here.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The 'exec' command is a little special among rebase -i's commands, as it
does *not* have a SHA-1 as first parameter. Instead, everything after the
`exec` command is treated as command-line to execute.
Let's reuse the arg/arg_len fields of the todo_item structure (which hold
the oneline for pick/edit commands) to point to the command-line.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This patch is a straight-forward reimplementation of the `edit`
operation of the interactive rebase command.
Well, not *quite* straight-forward: when stopping, the `edit`
command wants to write the `patch` file (which is not only the
patch, but includes the commit message and author information). To
that end, this patch requires the earlier work that taught the
log-tree machinery to respect the `file` setting of
rev_info->diffopt to write to a file stream different than stdout.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The 'noop' command is probably the most boring of all rebase -i commands
to support in the sequencer.
Which makes it an excellent candidate for this first stab to add support
for rebase -i's commands to the sequencer.
For the moment, let's also treat empty lines and commented-out lines as
'noop'; We will refine that handling later in this patch series.
To make it easier to identify "classes" of todo_commands (such as:
determine whether a command is pick-like, i.e. handles a single commit),
let's enforce a certain order of said commands.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This patch introduces a new action for the sequencer. It really does not
do a whole lot of its own right now, but lays the ground work for
patches to come. The intention, of course, is to finally make the
sequencer the work horse of the interactive rebase (the original idea
behind the "sequencer" concept).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It is actually not safe to look for a commit message by looking for the
first empty line and skipping it.
The find_commit_subject() function looks more carefully, so let's use
it. Since we are interested in the entire commit message, we re-compute
the string length after verifying that the commit subject is not empty
(in which case the entire commit message would be empty, something that
should not happen but that we want to handle gracefully).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It is the current coding style of the Git project to write
if (...) {
...
} else {
...
}
instead of putting the closing brace and the "else" keyword on separate
lines.
Pointed out by Junio Hamano.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This was noticed while addressing Junio Hamano's concern that some
"else" operators were on separate lines than the preceding closing
brace.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This commit starts the rebase of 5c76d3ceb2 to b32fe956d0
While at it, a couple of patches were moved around, Philip Oakley's
changes to the issue reporting template were squashed into Brendan
Forster's original patch, and the GIT_SSH_COMMAND patch series was updated
to the latest (v4).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Code cleanup.
* js/exec-path-coverity-workaround:
git_exec_path: do not return the result of getenv()
git_exec_path: avoid Coverity warning about unfree()d result
Tighten a test to avoid mistaking an extended ERE regexp engine as
a PRE regexp engine.
* jk/grep-e-could-be-extended-beyond-posix:
t7810: avoid assumption about invalid regex syntax
"git <cmd> @{push}" on a detached HEAD used to segfault; it has
been corrected to error out with a message.
* km/branch-get-push-while-detached:
branch_get_push: do not segfault when HEAD is detached
"git rebase -i" with a recent update started showing an incorrect
count when squashing more than 10 commits.
* jk/rebase-i-squash-count-fix:
rebase--interactive: count squash commits above 10 correctly
"git blame --porcelain" misidentified the "previous" <commit, path>
pair (aka "source") when contents came from two or more files.
* jk/blame-fixes:
blame: output porcelain "previous" header for each file
blame: handle --no-abbrev
blame: fix alignment with --abbrev=40
"git archive" did not read the standard configuration files, and
failed to notice a file that is marked as binary via the userdiff
driver configuration.
* jk/archive-zip-userdiff-config:
archive-zip: load userdiff config
It is natural that "git gc --auto" may not attempt to pack
everything into a single pack, and there is no point in warning
when the user has configured the system to use the pack bitmap,
leading to disabling further "gc".
* dt/disable-bitmap-in-auto-gc:
repack: die on incremental + write-bitmap-index
auto gc: don't write bitmaps for incremental repacks
Leakage of lockfiles in the config subsystem has been fixed.
* nd/config-misc-fixes:
config.c: handle lock file in error case in git_config_rename_...
config.c: rename label unlock_and_out
config.c: handle error case for fstat() calls
Recent update to the default abbreviation length that auto-scales
lacked documentation update, which has been corrected.
* jc/abbrev-autoscale-config:
config.abbrev: document the new default that auto-scales
"git fast-import" sometimes mishandled while rebalancing notes
tree, which has been fixed.
* mh/fast-import-notes-fix-new:
fast-import: properly fanout notes when tree is imported
Compression setting for producing packfiles were spread across
three codepaths, one of which did not honor any configuration.
Unify these so that all of them honor core.compression and
pack.compression variables the same way.
* jc/compression-config:
compression: unify pack.compression configuration parsing
Update the procedure to generate "tags" for developer support.
* jk/make-tags-find-sources-tweak:
Makefile: exclude contrib from FIND_SOURCE_FILES
Makefile: match shell scripts in FIND_SOURCE_FILES
Makefile: exclude test cruft from FIND_SOURCE_FILES
Makefile: reformat FIND_SOURCE_FILES
Some platforms no longer understand "latin-1" that is still seen in
the wild in e-mail headers; replace them with "iso-8859-1" that is
more widely known when conversion fails from/to it.
* jc/latin-1:
utf8: accept "latin-1" as ISO-8859-1
utf8: refactor code to decide fallback encoding
The _TODO_ entries in the Issues_template are easily misunderstood
as residual developer actions, rather than a place holder for user
data entry.
Replace the _TODO_ with positively directed actions for the user
("you/your") to perform. Ease off on the tone toward the end.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
This change is necessary to allow the files in .git/hooks/ to optionally
have the file extension `.exe` on Windows, as the file names are
hardcoded otherwise.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
In the MSVC-specific header, it makes no sense to guard anything behind
the _MSC_VER tell-tale that indicates whether we are compiling with
MSVC...
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Teach FSCACHE to remember "not found" directories.
This is a performance optimization.
FSCACHE is a performance optimization available for Windows. It
intercepts Posix-style lstat() calls into an in-memory directory
using FindFirst/FindNext. It improves performance on Windows by
catching the first lstat() call in a directory, using FindFirst/
FindNext to read the list of files (and attribute data) for the
entire directory into the cache, and short-cut subsequent lstat()
calls in the same directory. This gives a major performance
boost on Windows.
However, it does not remember "not found" directories. When STATUS
runs and there are missing directories, the lstat() interception
fails to find the parent directory and simply return ENOENT for the
file -- it does not remember that the FindFirst on the directory
failed. Thus subsequent lstat() calls in the same directory, each
re-attempt the FindFirst. This completely defeats any performance
gains.
This can be seen by doing a sparse-checkout on a large repo and
then doing a read-tree to reset the skip-worktree bits and then
running status.
This change reduced status times for my very large repo by 60%.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
The `perforce` and `perforce-server` package were moved from brew [1][2]
to cask [3]. Teach TravisCI the new location.
Perforce updates their binaries without version bumps. That made the
brew install (legitimately!) fail due to checksum mismatches. The
workaround is not necessary anymore as Cask [4] allows to disable the
checksum test for individual formulas.
[1] 1394e42de0
[2] f8da22d6b8
[3] https://github.com/caskroom/homebrew-cask/pull/29180
[4] https://caskroom.github.io/
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When looking for documentation for a specific function, you may be tempted
to run
git -C Documentation grep index_name_pos
only to find the file technical/api-in-core-index.txt, which doesn't
help for understanding the given function. It would be better to not find
these functions in the documentation, such that people directly dive into
the code instead.
In the previous patches we have documented
* index_name_pos()
* remove_index_entry_at()
* add_[file_]to_index()
in cache.h
We already have documentation for:
* add_index_entry()
* read_index()
Which leaves us with a TODO for:
* cache -> the_index macros
* refresh_index()
* discard_index()
* ie_match_stat() and ie_modified(); how they are different and when to
use which.
* write_index() that was renamed to write_locked_index
* cache_tree_invalidate_path()
* cache_tree_update()
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do this by moving the existing documentation from
read-cache.c to cache.h.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
