Teach FSCACHE to remember "not found" directories.
This is a performance optimization.
FSCACHE is a performance optimization available for Windows. It
intercepts Posix-style lstat() calls into an in-memory directory
using FindFirst/FindNext. It improves performance on Windows by
catching the first lstat() call in a directory, using FindFirst/
FindNext to read the list of files (and attribute data) for the
entire directory into the cache, and short-cut subsequent lstat()
calls in the same directory. This gives a major performance
boost on Windows.
However, it does not remember "not found" directories. When STATUS
runs and there are missing directories, the lstat() interception
fails to find the parent directory and simply return ENOENT for the
file -- it does not remember that the FindFirst on the directory
failed. Thus subsequent lstat() calls in the same directory, each
re-attempt the FindFirst. This completely defeats any performance
gains.
This can be seen by doing a sparse-checkout on a large repo and
then doing a read-tree to reset the skip-worktree bits and then
running status.
This change reduced status times for my very large repo by 60%.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
If multiple threads access a directory that is not yet in the cache, the
directory will be loaded by each thread. Only one of the results is added
to the cache, all others are leaked. This wastes performance and memory.
On cache miss, add a future object to the cache to indicate that the
directory is currently being loaded. Subsequent threads register themselves
with the future object and wait. When the first thread has loaded the
directory, it replaces the future object with the result and notifies
waiting threads.
Signed-off-by: Karsten Blees <blees@dcon.de>
Checking the work tree status is quite slow on Windows, due to slow
`lstat()` emulation (git calls `lstat()` once for each file in the
index). Windows operating system APIs seem to be much better at scanning
the status of entire directories than checking single files.
Add an `lstat()` implementation that uses a cache for lstat data. Cache
misses read the entire parent directory and add it to the cache.
Subsequent `lstat()` calls for the same directory are served directly
from the cache.
Also implement `opendir()`/`readdir()`/`closedir()` so that they create
and use directory listings in the cache.
The cache doesn't track file system changes and doesn't plug into any
modifying file APIs, so it has to be explicitly enabled for git functions
that don't modify the working copy.
Note: in an earlier version of this patch, the cache was always active and
tracked file system changes via ReadDirectoryChangesW. However, this was
much more complex and had negative impact on the performance of modifying
git commands such as 'git checkout'.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Add a macro to mark code sections that only read from the file system,
along with a config option and documentation.
This facilitates implementation of relatively simple file system level
caches without the need to synchronize with the file system.
Enable read-only sections for 'git status' and preload_index.
Signed-off-by: Karsten Blees <blees@dcon.de>
Emulating the POSIX lstat API on Windows via GetFileAttributes[Ex] is quite
slow. Windows operating system APIs seem to be much better at scanning the
status of entire directories than checking single files. A caching
implementation may improve performance by bulk-reading entire directories
or reusing data obtained via opendir / readdir.
Make the lstat implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Emulating the POSIX `dirent` API on Windows via
`FindFirstFile()`/`FindNextFile()` is pretty staightforward, however,
most of the information provided in the `WIN32_FIND_DATA` structure is
thrown away in the process. A more sophisticated implementation may
cache this data, e.g. for later reuse in calls to `lstat()`.
Make the `dirent` implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Define a base DIR structure with pointers to `readdir()`/`closedir()`
that match the `opendir()` implementation (similar to vtable pointers in
Object-Oriented Programming). Define `readdir()`/`closedir()` so that
they call the function pointers in the `DIR` structure. This allows to
choose the `opendir()` implementation on a call-by-call basis.
Make the fixed-size `dirent.d_name` buffer a flex array, as `d_name` may
be implementation specific (e.g. a caching implementation may allocate a
`struct dirent` with _just_ the size needed to hold the `d_name` in
question).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We will use them in the upcoming "FSCache" patches (to accelerate
sequential lstat() calls).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is the branch thicket of patches in Git for Windows that are
considered ready for upstream. To keep them in a ready-to-submit shape,
they are kept as close to the beginning of the branch thicket as
possible.
Backport a couple fixes to make the CI build run again (so much for
reproducible builds...).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The first three commits are rebased versions of those in gitgitgadget/git#1215. These allow the following:
1. Fix `git config --global foo.bar <path>` from allowing the `<path>`. As a bonus, users with a config value starting with `/` will not get a warning about "old-style" paths needing a "`%(prefix)/`".
2. When in WSL, the path starts with `/` so it needs to be interpolated properly. Update the warning to include `%(prefix)/` to get the right value for WSL users. (This is specifically for using Git for Windows from Git Bash, but in a WSL directory.)
3. When using WSL, the ownership check fails and reports an error message. This is noisy, and happens even if the user has marked the path with `safe.directory`. Remove that error message.
This merges the current version of the patch that tries to address Git
GUI's problems with intent-to-add files.
This patch will likely be improved substantially before it is merged
into Git GUI's main branch, but we want to have _something_ resembling a
fix already in Git for Windows v2.29.0.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch allows `add -p` and `add -i` with a large number of
files. It is kind of a hack that was never really meant to be
upstreamed. Let's see if we can do better in the built-in `add -p`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In MSYS2, we have two Python interpreters at our disposal, so we can
include the Python stuff in the build.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch teaches `git clean` to respect NTFS junctions and Unix
bind mounts: it will now stop at those boundaries.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Thorough benchmarking with repacking a subset of linux.git (the commit
history reachable from 93a6fefe2f ([PATCH] fix the SYSCTL=n compilation,
2007-02-28), to be precise) suggest that this allocator is on par, in
multi-threaded situations maybe even better than nedmalloc:
`git repack -adfq` with mimalloc, 8 threads:
31.166991900 27.576763800 28.712311000 27.373859000 27.163141900
`git repack -adfq` with nedmalloc, 8 threads:
31.915032900 27.149883100 28.244933700 27.240188800 28.580849500
In a different test using GitHub Actions build agents (probably
single-threaded, a core-strength of nedmalloc)):
`git repack -q -d -l -A --unpack-unreachable=2.weeks.ago` with mimalloc:
943.426 978.500 939.709 959.811 954.605
`git repack -q -d -l -A --unpack-unreachable=2.weeks.ago` with nedmalloc:
995.383 952.179 943.253 963.043 980.468
While these measurements were not executed with complete scientific
rigor, as no hardware was set aside specifically for these benchmarks,
it shows that mimalloc and nedmalloc perform almost the same, nedmalloc
with a bit higher variance and also slightly higher average (further
testing suggests that nedmalloc performs worse in multi-threaded
situations than in single-threaded ones).
In short: mimalloc seems to be slightly better suited for our purposes
than nedmalloc.
Seeing that mimalloc is developed actively, while nedmalloc ceased to
see any updates in eight years, let's use mimalloc on Windows instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch allows us to specify absolute paths without the drive
prefix e.g. when cloning.
Example:
C:\Users\me> git clone https://github.com/git/git \upstream-git
This will clone into a new directory C:\upstream-git, in line with how
Windows interprets absolute paths.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
