To verify that the `clean` side of the `clean`/`smudge` filter code is
correct with regards to LLP64 (read: to ensure that `size_t` is used
instead of `unsigned long`), here is a test case using a trivial filter,
specifically _not_ writing anything to the object store to limit the
scope of the test case.
As in previous commits, the `big` file from previous test cases is
reused if available, to save setup time, otherwise re-generated.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
To complement the `--stdin` and `--literally` test cases that verify
that we can hash files larger than 4GB on 64-bit platforms using the
LLP64 data model, here is a test case that exercises `hash-object`
_without_ any options.
Just as before, we use the `big` file from the previous test case if it
exists to save on setup time, otherwise generate it.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Just like the `hash-object --literally` code path, the `--stdin` code
path also needs to use `size_t` instead of `unsigned long` to represent
memory sizes, otherwise it would cause problems on platforms using the
LLP64 data model (such as Windows).
To limit the scope of the test case, the object is explicitly not
written to the object store, nor are any filters applied.
The `big` file from the previous test case is reused to save setup time;
To avoid relying on that side effect, it is generated if it does not
exist (e.g. when running via `sh t1007-*.sh --long --run=1,41`).
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Continue walking the code path for the >4GB `hash-object --literally`
test to the hash algorithm step for LLP64 systems.
This patch lets the SHA1DC code use `size_t`, making it compatible with
LLP64 data models (as used e.g. by Windows).
The interested reader of this patch will note that we adjust the
signature of the `git_SHA1DCUpdate()` function without updating _any_
call site. This certainly puzzled at least one reviewer already, so here
is an explanation:
This function is never called directly, but always via the macro
`platform_SHA1_Update`, which is usually called via the macro
`git_SHA1_Update`. However, we never call `git_SHA1_Update()` directly
in `struct git_hash_algo`. Instead, we call `git_hash_sha1_update()`,
which is defined thusly:
static void git_hash_sha1_update(git_hash_ctx *ctx,
const void *data, size_t len)
{
git_SHA1_Update(&ctx->sha1, data, len);
}
i.e. it contains an implicit downcast from `size_t` to `unsigned long`
(before this here patch). With this patch, there is no downcast anymore.
With this patch, finally, the t1007-hash-object.sh "files over 4GB hash
literally" test case is fixed.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Continue walking the code path for the >4GB `hash-object --literally`
test. The `hash_object_file_literally()` function internally uses both
`hash_object_file()` and `write_object_file_prepare()`. Both function
signatures use `unsigned long` rather than `size_t` for the mem buffer
sizes. Use `size_t` instead, for LLP64 compatibility.
While at it, convert those function's object's header buffer length to
`size_t` for consistency. The value is already upcast to `uintmax_t` for
print format compatibility.
Note: The hash-object test still does not pass. A subsequent commit
continues to walk the call tree's lower level hash functions to identify
further fixes.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The previous commit adds a test that demonstrates a problem in the
`hash-object --literally` command, manifesting in an unnecessary file
size limit on systems using the LLP64 data model (which includes
Windows).
Walking the affected code path is `cmd_hash_object()` >> `hash_fd()` >>
`hash_literally()` >> `hash_object_file_literally()`.
The function `hash_object_file_literally()` is the first with a file
length parameter (via a mem buffer). This commit changes the type of
that parameter to the LLP64 compatible `size_t` type.
There are no other uses of the function. The `strbuf` type is already
`size_t` compatible.
Note: The hash-object test does not yet pass. Subsequent commits will
continue to walk the call tree's lower level functions to identify
further fixes.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On LLP64 systems, such as Windows, the size of `long`, `int`, etc. is
only 32 bits (for backward compatibility). Git's use of `unsigned long`
for file memory sizes in many places, rather than size_t, limits the
handling of large files on LLP64 systems (commonly given as `>4GB`).
Provide a minimum test for handling a >4GB file. The `hash-object`
command, with the `--literally` and without `-w` option avoids
writing the object, either loose or packed. This avoids the code paths
hitting the `bigFileThreshold` config test code, the zlib code, and the
pack code.
Subsequent patches will walk the test's call chain, converting types to
`size_t` (which is larger in LLP64 data models) where appropriate.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Fix a regression in 2.35 that roke the use of "rebase" and "stash"
in a secondary worktree.
* en/keep-cwd:
sequencer, stash: fix running from worktree subdir
In commits bc3ae46b42 ("rebase: do not attempt to remove
startup_info->original_cwd", 2021-12-09) and 0fce211ccc ("stash: do not
attempt to remove startup_info->original_cwd", 2021-12-09), we wanted to
allow the subprocess to know which directory the parent process was
running from, so that the subprocess could protect it. However...
When run from a non-main worktree, setup_git_directory() will note
that the discovered git directory
(/PATH/TO/.git/worktree/non-main-worktree) does not match
DEFAULT_GIT_DIR_ENVIRONMENT (see setup_discovered_git_dir()), and
decide to set GIT_DIR in the environment. This matters because...
Whenever git is run with the GIT_DIR environment variable set, and
GIT_WORK_TREE not set, it presumes that '.' is the working tree. So...
This combination results in the subcommand being very confused about
the working tree. Fix it by also setting the GIT_WORK_TREE environment
variable along with setting cmd.dir.
A possibly more involved fix we could consider for later would be to
make setup.c set GIT_WORK_TREE whenever (a) it discovers both the git
directory and the working tree and (b) it decides to set GIT_DIR in the
environment. I did not attempt that here as such would be too big of a
change for a 2.35.1 release.
Test-case-by: Glen Choo <chooglen@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we interpolated paths in config variables that start with a
forward-slash as relative to the runtime prefix. This was not portable
and has been replaced with `%(prefix)/`.
Let's warn users when they use the now-deprecated form.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch re-adds the deprecated --stdin/-z options to `git
reset`. Those patches were overridden by a different set of options in
the upstream Git project before we could propose `--stdin`.
We offered this in MinGit to applications that wanted a safer way to
pass lots of pathspecs to Git, and these applications will need to be
adjusted.
Instead of `--stdin`, `--pathspec-from-file=-` should be used, and
instead of `-z`, `--pathspec-file-nul`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This branch allows third-party tools to call `git status
--no-lock-index` to avoid lock contention with the interactive Git usage
of the actual human user.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A fix for calling `vim` in Windows Terminal caused a regression and was
reverted. We partially un-revert this, to get the fix again.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is the recommended way on GitHub to describe policies revolving around
security issues and about supported versions.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Rather than using private IFTTT Applets that send mails to this
maintainer whenever a new version of a Git for Windows component was
released, let's use the power of GitHub workflows to make this process
publicly visible.
This workflow monitors the Atom/RSS feeds, and opens a ticket whenever a
new version was released.
Note: Bash sometimes releases multiple patched versions within a few
minutes of each other (i.e. 5.1p1 through 5.1p4, 5.0p15 and 5.0p16). The
MSYS2 runtime also has a similar system. We can address those patches as
a group, so we shouldn't get multiple issues about them.
Note further: We're not acting on newlib releases, OpenSSL alphas, Perl
release candidates or non-stable Perl releases. There's no need to open
issues about them.
Co-authored-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, an absolute POSIX path needs to be turned into a Windows
one. We used to interpret paths starting with a single `/` as relative
to the runtime-prefix, but now these need to be prefixed with
`%(prefix)/`. Let's warn for now, but still handle it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The `--stdin` option was a well-established paradigm in other commands,
therefore we implemented it in `git reset` for use by Visual Studio.
Unfortunately, upstream Git decided that it is time to introduce
`--pathspec-from-file` instead.
To keep backwards-compatibility for some grace period, we therefore
reinstate the `--stdin` option on top of the `--pathspec-from-file`
option, but mark it firmly as deprecated.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It was a bad idea to just remove that option from Git for Windows
v2.15.0, as early users of that (still experimental) option would have
been puzzled what they are supposed to do now.
So let's reintroduce the flag, but make sure to show the user good
advice how to fix this going forward.
We'll remove this option in a more orderly fashion when we're certain
that the option is no longer used (previous Visual Studio versions
relied on it).
The option is deprecated now, therefore we make sure that keeps saying
so until we finally remove it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When a third-party tool periodically runs `git status` in order to keep
track of the state of the working tree, it is a bad idea to lock the
index: it might interfere with interactive commands executed by the
user, e.g. when the user wants to commit files.
Git for Windows introduced the `--no-lock-index` option a long time ago
to fix that (it made it into Git for Windows v2.9.2(3)) by simply
avoiding to write that file.
The downside is that the periodic `git status` calls will be a little
bit more wasteful because they may have to refresh the index repeatedly,
only to throw away the updates when it exits. This cannot really be
helped, though, as tools wanting to get a periodic update of the status
have no way to predict when the user may want to lock the index herself.
Sadly, a competing approach was submitted (by somebody who apparently
has less work on their plate than this maintainer) that made it into
v2.15.0 but is *different*: instead of a `git status`-only option, it is
an option that comes *before* the Git command and is called differently,
too.
Let's give previous users a chance to upgrade to newer Git for Windows
versions by handling the `--no-lock-index` option, still, though with a
big fat warning.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We need to trim \r from the output of 'ssh-keygen -Y find-principals' on
Windows, or we end up calling 'ssh-keygen -Y verify' with a bogus signer
identity. ssh-keygen.c:2841 contains a call to puts(3), which confirms this
hypothesis. Signature verification passes with the fix.
Signed-off-by: pedro martelletto <pedro@yubico.com>
In e3f7e01b50 (Revert "editor: save and reset terminal after calling
EDITOR", 2021-11-22), we reverted the commit wholesale where the
terminal state would be saved and restored before/after calling an
editor.
The reverted commit was intended to fix a problem with Windows Terminal
where simply calling `vi` would cause problems afterwards.
To fix the problem addressed by the revert, but _still_ keep the problem
with Windows Terminal fixed, let's revert the revert, with a twist: we
restrict the save/restore _specifically_ to the case where `vi` (or
`vim`) is called, and do not do the same for any other editor.
This should still catch the majority of the cases, and will bridge the
time until the original patch is re-done in a way that addresses all
concerns.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git documentation refers to $HOME and $XDG_CONFIG_HOME often, but does not specify how or where these values come from on Windows where neither is set by default. The new documentation reflects the behavior of setup_windows_environment() in compat/mingw.c.
Signed-off-by: Alejandro Barreto <alejandro.barreto@ni.com>
These are Git for Windows' Git GUI and gitk patches. We will have to
decide at some point what to do about them, but that's a little lower
priority (as Git GUI seems to be unmaintained for the time being, and
the gitk maintainer keeps a very low profile on the Git mailing list,
too).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows accepts pull requests; Core Git does not. Therefore we
need to adjust the template (because it only matches core Git's
project management style, not ours).
Also: direct Git for Windows enhancements to their contributions page,
space out the text for easy reading, and clarify that the mailing list
is plain text, not HTML.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Getting started contributing to Git can be difficult on a Windows
machine. CONTRIBUTING.md contains a guide to getting started, including
detailed steps for setting up build tools, running tests, and
submitting patches to upstream.
[includes an example by Pratik Karki how to submit v2, v3, v4, etc.]
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
The Git project followed suite and added their Code of Conduct, based on
the Contributors' Covenant v1.4.
We edit it slightly to reflect Git for Windows' particulars.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Now that we have a `batch` mode, let's be explicit.
This is a follow-up to ce4786fc77 (mingw: change core.fsyncObjectFiles
= 1 by default, 2017-09-04) and will most likely have to be squashed
into it before upstreaming that patch (after the `batch` fsync mode was
upstreamed).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Previously, we did not install any handler for Ctrl+C, but now we really
want to because the MSYS2 runtime learned the trick to call the
ConsoleCtrlHandler when Ctrl+C was pressed.
With this, hitting Ctrl+C while `git log` is running will only terminate
the Git process, but not the pager. This finally matches the behavior on
Linux and on macOS.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The Makefile target `install-mingit-test-artifacts` simply copies stuff
and things directly into a MinGit directory, including an init.bat
script to set everything up so that the tests can be run in a cmd
window.
Sadly, Git's test suite still relies on a Perl interpreter even if
compiled with NO_PERL=YesPlease. We punt for now, installing a small
script into /usr/bin/perl that hands off to an existing Perl of a Git
for Windows SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This merges the topic branch (specifically backported onto v2.33.1 to
allow for integrating into Git for Windows' `main` branch) that strikes
a better balance between safety and speed: rather than `fsync()`ing each
and every loose object file, we now offer to do it in a batch.
This will become the new default in Git for Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The TerminateProcess() function does not actually leave the child
processes any chance to perform any cleanup operations. This is bad
insofar as Git itself expects its signal handlers to run.
A symptom is e.g. a left-behind .lock file that would not be left behind
if the same operation was run, say, on Linux.
To remedy this situation, we use an obscure trick: we inject a thread
into the process that needs to be killed and to let that thread run the
ExitProcess() function with the desired exit status. Thanks J Wyman for
describing this trick.
The advantage is that the ExitProcess() function lets the atexit
handlers run. While this is still different from what Git expects (i.e.
running a signal handler), in practice Git sets up signal handlers and
atexit handlers that call the same code to clean up after itself.
In case that the gentle method to terminate the process failed, we still
fall back to calling TerminateProcess(), but in that case we now also
make sure that processes spawned by the spawned process are terminated;
TerminateProcess() does not give the spawned process a chance to do so
itself.
Please note that this change only affects how Git for Windows tries to
terminate processes spawned by Git's own executables. Third-party
software that *calls* Git and wants to terminate it *still* need to make
sure to imitate this gentle method, otherwise this patch will not have
any effect.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, the current working directory is pretty much guaranteed to
contain a colon. If we feed that path to CVS, it mistakes it for a
separator between host and port, though.
This has not been a problem so far because Git for Windows uses MSYS2's
Bash using a POSIX emulation layer that also pretends that the current
directory is a Unix path (at least as long as we're in a shell script).
However, that is rather limiting, as Git for Windows also explores other
ports of other Unix shells. One of those is BusyBox-w32's ash, which is
a native port (i.e. *not* using any POSIX emulation layer, and certainly
not emulating Unix paths).
So let's just detect if there is a colon in $PWD and punt in that case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
