Even if CMake is not the canonical way to build Git for Windows, but
CMake support merely exists in Git to support building Git for Windows
using Visual Studio, we should include `headless-git` in such a scenario
when installing the binaries to a given location.
This merges the current version of the patch that tries to address Git
GUI's problems with intent-to-add files.
This patch will likely be improved substantially before it is merged
into Git GUI's main branch, but we want to have _something_ resembling a
fix already in Git for Windows v2.29.0.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch allows `add -p` and `add -i` with a large number of
files. It is kind of a hack that was never really meant to be
upstreamed. Let's see if we can do better in the built-in `add -p`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic vendors in mimalloc v2.0.9, a fast allocator that allows Git
for Windows to perform efficiently.
Switch Git for Windows to using mimalloc instead of nedmalloc
In MSYS2, we have two Python interpreters at our disposal, so we can
include the Python stuff in the build.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch teaches `git clean` to respect NTFS junctions and Unix
bind mounts: it will now stop at those boundaries.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch allows us to specify absolute paths without the drive
prefix e.g. when cloning.
Example:
C:\Users\me> git clone https://github.com/git/git \upstream-git
This will clone into a new directory C:\upstream-git, in line with how
Windows interprets absolute paths.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These fixes were necessary for Sverre Rabbelier's remote-hg to work,
but for some magic reason they are not necessary for the current
remote-hg. Makes you wonder how that one gets away with it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
To verify that the `clean` side of the `clean`/`smudge` filter code is
correct with regards to LLP64 (read: to ensure that `size_t` is used
instead of `unsigned long`), here is a test case using a trivial filter,
specifically _not_ writing anything to the object store to limit the
scope of the test case.
As in previous commits, the `big` file from previous test cases is
reused if available, to save setup time, otherwise re-generated.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
To complement the `--stdin` and `--literally` test cases that verify
that we can hash files larger than 4GB on 64-bit platforms using the
LLP64 data model, here is a test case that exercises `hash-object`
_without_ any options.
Just as before, we use the `big` file from the previous test case if it
exists to save on setup time, otherwise generate it.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Just like the `hash-object --literally` code path, the `--stdin` code
path also needs to use `size_t` instead of `unsigned long` to represent
memory sizes, otherwise it would cause problems on platforms using the
LLP64 data model (such as Windows).
To limit the scope of the test case, the object is explicitly not
written to the object store, nor are any filters applied.
The `big` file from the previous test case is reused to save setup time;
To avoid relying on that side effect, it is generated if it does not
exist (e.g. when running via `sh t1007-*.sh --long --run=1,41`).
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
If `feature.experimental` and `feature.manyFiles` are set and the user
has not explicitly turned off the builtin FSMonitor, we now start
the built-in FSMonitor by default.
Only forcing it when UNSET matches the behavior of UPDATE_DEFAULT_BOOL()
used for other repo settings.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
In Git for Windows, `has_symlinks` is set to 0 by default. Therefore, we
need to parse the config setting `core.symlinks` to know if it has been
set to `true`. In `git init`, we must do that before copying the
templates because they might contain symbolic links.
Even if the support for symbolic links on Windows has not made it to
upstream Git yet, we really should make sure that all the `core.*`
settings are parsed before proceeding, as they might very well change
the behavior of `git init` in a way the user intended.
This fixes https://github.com/git-for-windows/git/issues/3414
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Ensure key CMake option values are part of the CMake output to
facilitate user support when tool updates impact the wider CMake
actions, particularly ongoing 'improvements' in Visual Studio.
These CMake displays perform the same function as the build-options.txt
provided in the main Git for Windows. CMake is already chatty.
The setting of CMAKE_EXPORT_COMPILE_COMMANDS is also reported.
Include the environment's CMAKE_EXPORT_COMPILE_COMMANDS value which
may have been propogated to CMake's internal value.
Testing the CMAKE_EXPORT_COMPILE_COMMANDS processing can be difficult
in the Visual Studio environment, as it may be cached in many places.
The 'environment' may include the OS, the user shell, CMake's
own environment, along with the Visual Studio presets and caches.
See previous commit for arefacts that need removing for a clean test.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Continue walking the code path for the >4GB `hash-object --literally`
test to the hash algorithm step for LLP64 systems.
This patch lets the SHA1DC code use `size_t`, making it compatible with
LLP64 data models (as used e.g. by Windows).
The interested reader of this patch will note that we adjust the
signature of the `git_SHA1DCUpdate()` function without updating _any_
call site. This certainly puzzled at least one reviewer already, so here
is an explanation:
This function is never called directly, but always via the macro
`platform_SHA1_Update`, which is usually called via the macro
`git_SHA1_Update`. However, we never call `git_SHA1_Update()` directly
in `struct git_hash_algo`. Instead, we call `git_hash_sha1_update()`,
which is defined thusly:
static void git_hash_sha1_update(git_hash_ctx *ctx,
const void *data, size_t len)
{
git_SHA1_Update(&ctx->sha1, data, len);
}
i.e. it contains an implicit downcast from `size_t` to `unsigned long`
(before this here patch). With this patch, there is no downcast anymore.
With this patch, finally, the t1007-hash-object.sh "files over 4GB hash
literally" test case is fixed.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In Git-for-Windows, work on using ARM64 has progressed. The
commit 2d94b77b27 (cmake: allow building for Windows/ARM64, 2020-12-04)
failed to notice that /compat/vcbuild/vcpkg_install.bat will default to
using the "x64-windows" architecture for the vcpkg installation if not set,
but CMake is not told of this default. Commit 635b6d99b3 (vcbuild: install
ARM64 dependencies when building ARM64 binaries, 2020-01-31) later updated
vcpkg_install.bat to accept an arch (%1) parameter, but retained the default.
This default is neccessary for the use case where the project directory is
opened directly in Visual Studio, which will find and build a CMakeLists.txt
file without any parameters, thus expecting use of the default setting.
Also Visual studio will generate internal .sln solution and .vcxproj project
files needed for some extension tools. Inform users of the additional
.sln/.vcxproj generation.
** How to test:
rm -rf '.vs' # remove old visual studio settings
rm -rf 'compat/vcbuild/vcpkg' # remove any vcpkg downloads
rm -rf 'contrib/buildsystems/out' # remove builds & CMake artifacts
with a fresh Visual Studio Community Edition, File>>Open>>(git *folder*)
to load the project (which will take some time!).
check for successful compilation.
The implicit .sln (etc.) are in the hidden .vs directory created by
Visual Studio.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Continue walking the code path for the >4GB `hash-object --literally`
test. The `hash_object_file_literally()` function internally uses both
`hash_object_file()` and `write_object_file_prepare()`. Both function
signatures use `unsigned long` rather than `size_t` for the mem buffer
sizes. Use `size_t` instead, for LLP64 compatibility.
While at it, convert those function's object's header buffer length to
`size_t` for consistency. The value is already upcast to `uintmax_t` for
print format compatibility.
Note: The hash-object test still does not pass. A subsequent commit
continues to walk the call tree's lower level hash functions to identify
further fixes.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The previous commit adds a test that demonstrates a problem in the
`hash-object --literally` command, manifesting in an unnecessary file
size limit on systems using the LLP64 data model (which includes
Windows).
Walking the affected code path is `cmd_hash_object()` >> `hash_fd()` >>
`hash_literally()` >> `hash_object_file_literally()`.
The function `hash_object_file_literally()` is the first with a file
length parameter (via a mem buffer). This commit changes the type of
that parameter to the LLP64 compatible `size_t` type.
There are no other uses of the function. The `strbuf` type is already
`size_t` compatible.
Note: The hash-object test does not yet pass. Subsequent commits will
continue to walk the call tree's lower level functions to identify
further fixes.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On LLP64 systems, such as Windows, the size of `long`, `int`, etc. is
only 32 bits (for backward compatibility). Git's use of `unsigned long`
for file memory sizes in many places, rather than size_t, limits the
handling of large files on LLP64 systems (commonly given as `>4GB`).
Provide a minimum test for handling a >4GB file. The `hash-object`
command, with the `--literally` and without `-w` option avoids
writing the object, either loose or packed. This avoids the code paths
hitting the `bigFileThreshold` config test code, the zlib code, and the
pack code.
Subsequent patches will walk the test's call chain, converting types to
`size_t` (which is larger in LLP64 data models) where appropriate.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Because `git subtree` (unlike most other `contrib` modules) is included as
part of the standard release of Git for Windows, its stability should be
verified as consistently as it is for the rest of git. By including the
`git subtree` tests in the CI workflow, these tests are as much of a gate to
merging and indicator of stability as the standard test suite.
Signed-off-by: Victoria Dye <vdye@github.com>
This adds support for a new http.sslAutoClientCert config value.
In cURL 7.77 or later the schannel backend does not automatically send
client certificates from the Windows Certificate Store anymore.
This config value is only used if http.sslBackend is set to "schannel",
and can be used to opt in to the old behavior and force cURL to send
client certificates.
This fixes https://github.com/git-for-windows/git/issues/3292
Signed-off-by: Pascal Muller <pascalmuller@gmail.com>
We used to have that `make vcxproj` hack, but a hack it is. In the
meantime, we have a much cleaner solution: using CMake, either
explicitly, or even more conveniently via Visual Studio's built-in CMake
support (simply open Git's top-level directory via File>Open>Folder...).
Let's let the `README` reflect this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
As reported in https://github.com/newren/git-filter-repo/pull/225, it
looks like 99 bytes is not really sufficient to represent e.g. the full
path to Python when installed via Windows Store (and this path is used
in the hasb bang line when installing scripts via `pip`).
Let's increase it to what is probably the maximum sensible path size:
MAX_PATH. This makes `parse_interpreter()` in line with what
`lookup_prog()` handles.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Vilius Šumskas <vilius@sumskas.eu>
The CMakeSettings.json file is tool generated. Developers may track it
should they provide additional settings.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
The intention of this change is to align with how the top-level git
`Makefile` defines its own test target (which also internally calls
`$(MAKE) -C t/ all`). This change also ensures the consistency of
`make -C contrib/subtree test` with other testing in CI executions
(which rely on `$DEFAULT_TEST_TARGET` being defined as `prove`).
Signed-off-by: Victoria Dye <vdye@github.com>
