This branch introduces support for reading the "Windows-wide" Git
configuration from `%PROGRAMDATA%\Git\config`. As these settings are
intended to be shared between *all* Git-related software, that config
file takes an even lower precedence than `$(prefix)/etc/gitconfig`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These are Git for Windows' Git GUI and gitk patches. We will have to
decide at some point what to do about them, but that's a little lower
priority (as Git GUI seems to be unmaintained for the time being, and
the gitk maintainer keeps a very low profile on the Git mailing list,
too).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is the branch thicket of patches in Git for Windows that are
considered ready for upstream. To keep them in a ready-to-submit shape,
they are kept as close to the beginning of the branch thicket as
possible.
With Windows 10 Build 14972 in Developer Mode, a new flag is supported
by CreateSymbolicLink() to create symbolic links even when running
outside of an elevated session (which was previously required).
This new flag is called SYMBOLIC_LINK_FLAG_ALLOW_UNPRIVILEGED_CREATE and
has the numeric value 0x02.
Previous Windows 10 versions will not understand that flag and return an
ERROR_INVALID_PARAMETER, therefore we have to be careful to try passing
that flag only when the build number indicates that it is supported.
For more information about the new flag, see this blog post:
https://blogs.windows.com/buildingapps/2016/12/02/symlinks-windows-10/
This patch is loosely based on the patch submitted by Samuel D. Leslie
as https://github.com/git-for-windows/git/pull/1184.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, symbolic links have a type: a "file symlink" must point at
a file, and a "directory symlink" must point at a directory. If the
type of symlink does not match its target, it doesn't work.
Git does not record the type of symlink in the index or in a tree. On
checkout it'll guess the type, which only works if the target exists
at the time the symlink is created. This may often not be the case,
for example when the link points at a directory inside a submodule.
By specifying `symlink=file` or `symlink=dir` the user can specify what
type of symlink Git should create, so Git doesn't have to rely on
unreliable heuristics.
Signed-off-by: Bert Belder <bertbelder@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Symlinks on Windows have a flag that indicates whether the target is a file
or a directory. Symlinks of wrong type simply don't work. This even affects
core Win32 APIs (e.g. DeleteFile() refuses to delete directory symlinks).
However, CreateFile() with FILE_FLAG_BACKUP_SEMANTICS doesn't seem to care.
Check the target type by first creating a tentative file symlink, opening
it, and checking the type of the resulting handle. If it is a directory,
recreate the symlink with the directory flag set.
It is possible to create symlinks before the target exists (or in case of
symlinks to symlinks: before the target type is known). If this happens,
create a tentative file symlink and postpone the directory decision: keep
a list of phantom symlinks to be processed whenever a new directory is
created in mingw_mkdir().
Limitations: This algorithm may fail if a link target changes from file to
directory or vice versa, or if the target directory is created in another
process.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Implement symlink() that always creates file symlinks. Fails with ENOSYS
if symlinks are disabled or unsupported.
Note: CreateSymbolicLinkW() was introduced with symlink support in Windows
Vista. For compatibility with Windows XP, we need to load it dynamically
and fail gracefully if it isnt's available.
Signed-off-by: Karsten Blees <blees@dcon.de>
Implement readlink() by reading NTFS reparse points. Works for symlinks
and directory junctions. If symlinks are disabled, fail with ENOSYS.
Signed-off-by: Karsten Blees <blees@dcon.de>
If symlinks are enabled, resolve all symlinks when changing directories,
as required by POSIX.
Note: Git's real_path() function bases its link resolution algorithm on
this property of chdir(). Unfortunately, the current directory on Windows
is limited to only MAX_PATH (260) characters. Therefore using symlinks and
long paths in combination may be problematic.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
MSVCRT's _wrename() cannot rename symlinks over existing files: it returns
success without doing anything. Newer MSVCR*.dll versions probably do not
have this problem: according to CRT sources, they just call MoveFileEx()
with the MOVEFILE_COPY_ALLOWED flag.
Get rid of _wrename() and call MoveFileEx() with proper error handling.
Signed-off-by: Karsten Blees <blees@dcon.de>
These patches are probably no longer necessary. Make sure before
dropping them, though.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
_wunlink() / DeleteFileW() refuses to delete symlinks to directories. If
_wunlink() fails with ERROR_ACCESS_DENIED, try _wrmdir() as well.
Signed-off-by: Karsten Blees <blees@dcon.de>
Symlinks on Windows don't work the same way as on Unix systems. E.g. there
are different types of symlinks for directories and files, creating
symlinks requires administrative privileges etc.
By default, disable symlink support on Windows. I.e. users explicitly have
to enable it with 'git config [--system|--global] core.symlinks true'.
The test suite ignores system / global config files. Allow testing *with*
symlink support by checking if native symlinks are enabled in MSys2 (via
'MSYS=winsymlinks:nativestrict').
Reminder: This would need to be changed if / when we find a way to run the
test suite in a non-MSys-based shell (e.g. dash).
Signed-off-by: Karsten Blees <blees@dcon.de>
The retry pattern is duplicated in three places. It also seems to be too
hard to use: mingw_unlink() and mingw_rmdir() duplicate the code to retry,
and both of them do so incompletely. They also do not restore errno if the
user answers 'no'.
Introduce a retry_ask_yes_no() helper function that handles retry with
small delay, asking the user, and restoring errno.
mingw_unlink: include _wchmod in the retry loop (which may fail if the
file is locked exclusively).
mingw_rmdir: include special error handling in the retry loop.
Signed-off-by: Karsten Blees <blees@dcon.de>
Git typically doesn't trust the stat.st_size member of symlinks (e.g. see
strbuf_readlink()). However, some functions take shortcuts if st_size is 0
(e.g. diff_populate_filespec()).
In mingw_lstat() and fscache_lstat(), make sure to return an adequate size.
The extra overhead of opening and reading the reparse point to calculate
the exact size is not necessary, as git doesn't rely on the value anyway.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Move S_IFLNK detection to file_attr_to_st_mode() and reuse it in fscache.
Implement DT_LNK detection in dirent.c and the fscache readdir version.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When obtaining lstat information for reparse points, we need to call
FindFirstFile() in addition to GetFileInformationEx() to obtain the type
of the reparse point (symlink, mount point etc.). However, currently there
is no error handling whatsoever if FindFirstFile() fails.
Call FindFirstFile() before modifying the stat *buf output parameter and
error out if the call fails.
Note: The FindFirstFile() return value includes all the data that we get
from GetFileAttributesEx(), so we could replace GetFileAttributesEx() with
FindFirstFile(). We don't do that because GetFileAttributesEx() is about
twice as fast for single files. I.e. we only pay the extra cost of calling
FindFirstFile() in the rare case that we encounter a reparse point.
Note: The indentation of the remaining reparse point code will be fixed in
the next patch.
Signed-off-by: Karsten Blees <blees@dcon.de>
With the new mingw_stat() implementation, do_lstat() is only called from
mingw_lstat() (with follow == 0). Remove the extra function and the old
mingw_stat()-specific (follow == 1) logic.
Signed-off-by: Karsten Blees <blees@dcon.de>
With respect to symlinks, the current stat() implementation is almost the
same as lstat(): except for the file type (st_mode & S_IFMT), it returns
information about the link rather than the target.
Implement stat by opening the file with as little permissions as possible
and calling GetFileInformationByHandle on it. This way, all link resoltion
is handled by the Windows file system layer.
If symlinks are disabled, use lstat() as before, but fail with ELOOP if a
symlink would have to be resolved.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
GetFileAttributes cannot handle paths with trailing dir separator. The
current [l]stat implementation calls GetFileAttributes twice if the path
has trailing slashes (first with the original path passed to [l]stat, and
and a second time with a path copy with trailing '/' removed).
With Unicode conversion, we get the length of the path for free and also
have a (wide char) buffer that can be modified.
Remove trailing directory separators before calling the Win32 API.
Signed-off-by: Karsten Blees <blees@dcon.de>
strbuf_readlink() refuses to read link targets that exceed PATH_MAX (even
if a sufficient size was specified by the caller).
As some platforms support longer paths, remove this restriction (similar
to strbuf_getcwd()).
Signed-off-by: Karsten Blees <blees@dcon.de>
strbuf_readlink() calls readlink() twice if the hint argument specifies the
exact size of the link target (e.g. by passing stat.st_size as returned by
lstat()). This is necessary because 'readlink(..., hint) == hint' could
mean that the buffer was too small.
Use hint + 1 as buffer size to prevent this.
Signed-off-by: Karsten Blees <blees@dcon.de>
When running an external diff from, say, a diff tool, it is safe to
assume that we want to write the files in question. On Windows, that
means that there cannot be any other process holding an open handle to
said files.
So let's make sure that `git diff` itself is not holding any open handle
to the files in question.
This fixes https://github.com/git-for-windows/git/issues/1315
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When grepping through the output of a command in the test suite, there
is always a chance that something goes wrong, in which case there would
not be anything useful to debug.
Let's redirect the output into a file instead, and grep that file, so
that the log can be inspected easily if the grep fails.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We should not actually expect the first `attrib.exe` in the PATH to
be the one we are looking for. Or that it is in the PATH, for that
matter.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
POSIX-to-Windows path mangling would make it fail. Symptoms:
++ init_git
++ rm -fr .git
++ git init
Initialized empty Git repository in [...]
++ git remote add svnsim testsvn::sim:///usr/src/git/wip5/t/t9154/svn.dump
++ git remote add svnfile testsvn::file:///usr/src/git/wip5/t/t9154/svn.dump
++ git fetch svnsim
progress Imported commit 1.
fatal: Write to frontend failed: Bad file descriptor
fast-import: dumping crash report to .git/fast_import_crash_23356
fatal: error while running fast-import
fatal: unexpected end of fast-import feedback
error: last command exited with $?=128
not ok 1 - simple fetch
Since the remote-svn project seems to be dormant at the moment (and not
complete enough to be used, which is a pity), let's just skip this test
on Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A change between versions 2.4.1 and 2.6.0 of the MSYS2 runtime modified
how Cygwin's runtime (and hence Git for Windows' MSYS2 runtime
derivative) handles locales: d16a56306d (Consolidate wctomb/mbtowc calls
for POSIX-1.2008, 2016-07-20).
An unintended side-effect is that "cold-calling" into the POSIX
emulation will start with a locale based on the current code page,
something that Git for Windows is very ill-prepared for, as it expects
to be able to pass a command-line containing non-ASCII characters to the
shell without having those characters munged.
One symptom of this behavior: when `git clone` or `git fetch` shell out
to call `git-upload-pack` with a path that contains non-ASCII
characters, the shell tried to interpret the entire command-line
(including command-line parameters) as executable path, which obviously
must fail.
This fixes https://github.com/git-for-windows/git/issues/1036
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We no longer use MakeMaker, so let's not state in the MINGW section that
we do not want to use it...
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With the recent update in efee955 (gpg-interface: check gpg signature
creation status, 2016-06-17), we ask GPG to send all status updates to
stderr, and then catch the stderr in an strbuf.
But GPG might fail, and send error messages to stderr. And we simply
do not show them to the user.
Even worse: this swallows any interactive prompt for a passphrase. And
detaches stderr from the tty so that the passphrase cannot be read.
So while the first problem could be fixed (by printing the captured
stderr upon error), the second problem cannot be easily fixed, and
presents a major regression.
So let's just revert commit efee9553a4.
This fixes https://github.com/git-for-windows/git/issues/871
Cc: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In 20d2a30f8f (Makefile: replace perl/Makefile.PL with simple make
rules, 2017-12-10), Git stopped using MakeMaker. Therefore, that
definition in the MINGW-specific section became useless.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We introduced helper macros to simplify loading functions dynamically.
Might just as well use them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Accessing the Windows console through the special CONIN$ / CONOUT$ devices
doesn't work properly for non-ASCII usernames an passwords.
It also doesn't work for terminal emulators that hide the native console
window (such as mintty), and 'TERM=xterm*' is not necessarily a reliable
indicator for such terminals.
The new shell_prompt() function, on the other hand, works fine for both
MSys1 and MSys2, in native console windows as well as mintty, and properly
supports Unicode. It just needs bash on the path (for 'read -s', which is
bash-specific).
On Windows, try to use the shell to read from the terminal. If that fails
with ENOENT (i.e. bash was not found), use CONIN/OUT as fallback.
Note: To test this, create a UTF-8 credential file with non-ASCII chars,
e.g. in git-bash: 'echo url=http://täst.com > cred.txt'. Then in git-cmd,
'git credential fill <cred.txt' works (shell version), while calling git
without the git-wrapper (i.e. 'mingw64\bin\git credential fill <cred.txt')
mangles non-ASCII chars in both console output and input.
Signed-off-by: Karsten Blees <blees@dcon.de>
If multiple threads access a directory that is not yet in the cache, the
directory will be loaded by each thread. Only one of the results is added
to the cache, all others are leaked. This wastes performance and memory.
On cache miss, add a future object to the cache to indicate that the
directory is currently being loaded. Subsequent threads register themselves
with the future object and wait. When the first thread has loaded the
directory, it replaces the future object with the result and notifies
waiting threads.
Signed-off-by: Karsten Blees <blees@dcon.de>
The `git_terminal_prompt()` function expects the terminal window to be
attached to a Win32 Console. However, this is not the case with terminal
windows other than `cmd.exe`'s, e.g. with MSys2's own `mintty`.
Non-cmd terminals such as `mintty` still have to have a Win32 Console
to be proper console programs, but have to hide the Win32 Console to
be able to provide more flexibility (such as being resizeable not only
vertically but also horizontally). By writing to that Win32 Console,
`git_terminal_prompt()` manages only to send the prompt to nowhere and
to wait for input from a Console to which the user has no access.
This commit introduces a function specifically to support `mintty` -- or
other terminals that are compatible with MSys2's `/dev/tty` emulation. We
use the `TERM` environment variable as an indicator for that: if the value
starts with "xterm" (such as `mintty`'s "xterm_256color"), we prefer to
let `xterm_prompt()` handle the user interaction.
The most prominent user of `git_terminal_prompt()` is certainly
`git-remote-https.exe`. It is an interesting use case because both
`stdin` and `stdout` are redirected when Git calls said executable, yet
it still wants to access the terminal.
When running inside a `mintty`, the terminal is not accessible to the
`git-remote-https.exe` program, though, because it is a MinGW program
and the `mintty` terminal is not backed by a Win32 console.
To solve that problem, we simply call out to the shell -- which is an
*MSys2* program and can therefore access `/dev/tty`.
Helped-by: nalla <nalla@hamal.uberspace.de>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Windows paths are typically limited to MAX_PATH = 260 characters, even
though the underlying NTFS file system supports paths up to 32,767 chars.
This limitation is also evident in Windows Explorer, cmd.exe and many
other applications (including IDEs).
Particularly annoying is that most Windows APIs return bogus error codes
if a relative path only barely exceeds MAX_PATH in conjunction with the
current directory, e.g. ERROR_PATH_NOT_FOUND / ENOENT instead of the
infinitely more helpful ERROR_FILENAME_EXCED_RANGE / ENAMETOOLONG.
Many Windows wide char APIs support longer than MAX_PATH paths through the
file namespace prefix ('\\?\' or '\\?\UNC\') followed by an absolute path.
Notable exceptions include functions dealing with executables and the
current directory (CreateProcess, LoadLibrary, Get/SetCurrentDirectory) as
well as the entire shell API (ShellExecute, SHGetSpecialFolderPath...).
Introduce a handle_long_path function to check the length of a specified
path properly (and fail with ENAMETOOLONG), and to optionally expand long
paths using the '\\?\' file namespace prefix. Short paths will not be
modified, so we don't need to worry about device names (NUL, CON, AUX).
Contrary to MSDN docs, the GetFullPathNameW function doesn't seem to be
limited to MAX_PATH (at least not on Win7), so we can use it to do the
heavy lifting of the conversion (translate '/' to '\', eliminate '.' and
'..', and make an absolute path).
Add long path error checking to xutftowcs_path for APIs with hard MAX_PATH
limit.
Add a new MAX_LONG_PATH constant and xutftowcs_long_path function for APIs
that support long paths.
While improved error checking is always active, long paths support must be
explicitly enabled via 'core.longpaths' option. This is to prevent end
users to shoot themselves in the foot by checking out files that Windows
Explorer, cmd/bash or their favorite IDE cannot handle.
Test suite:
Test the case is when the full pathname length of a dir is close
to 260 (MAX_PATH).
Bug report and an original reproducer by Andrey Rogozhnikov:
https://github.com/msysgit/git/pull/122#issuecomment-43604199
[jes: adjusted test number to avoid conflicts, added support for
chdir(), etc]
Thanks-to: Martin W. Kirst <maki@bitkings.de>
Thanks-to: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Original-test-by: Andrey Rogozhnikov <rogozhnikov.andrey@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Checking the work tree status is quite slow on Windows, due to slow lstat
emulation (git calls lstat once for each file in the index). Windows
operating system APIs seem to be much better at scanning the status
of entire directories than checking single files.
Add an lstat implementation that uses a cache for lstat data. Cache misses
read the entire parent directory and add it to the cache. Subsequent lstat
calls for the same directory are served directly from the cache.
Also implement opendir / readdir / closedir so that they create and use
directory listings in the cache.
The cache doesn't track file system changes and doesn't plug into any
modifying file APIs, so it has to be explicitly enabled for git functions
that don't modify the working copy.
Note: in an earlier version of this patch, the cache was always active and
tracked file system changes via ReadDirectoryChangesW. However, this was
much more complex and had negative impact on the performance of modifying
git commands such as 'git checkout'.
Signed-off-by: Karsten Blees <blees@dcon.de>
