When skipping a hunk that adds a different number of lines than it
removes, we need to adjust the subsequent hunk headers of non-skipped
hunks: in pathological cases, the context is not enough to determine
precisely where the patch should be applied.
This problem was identified in 23fea4c240 (t3701: add failing test for
pathological context lines, 2018-03-01) and fixed in the Perl version in
fecc6f3a68 (add -p: adjust offsets of subsequent hunks when one is
skipped, 2018-03-01).
And this patch fixes it in the C version of `git add -p`.
In contrast to the Perl version, we try to keep the extra text on the
hunk header (which typically contains the signature of the function
whose code is changed in the hunk) intact.
Note: while the C version does not support staging mode changes at this
stage, we already prepare for this by simply skipping the hunk header if
both old and new offset is 0 (this cannot happen for regular hunks, and
we will use this as an indicator that we are looking at a special hunk).
Likewise, we already prepare for hunk splitting by handling the absence
of extra text in the hunk header gracefully: only the first split hunk
will have that text, the others will not (indicated by an empty extra
text start/end range). Preparing for hunk splitting already at this
stage avoids an indentation change of the entire hunk header-printing
block later, and is almost as easy to review as without that handling.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Just like the Perl version, we now generate two diffs if `color.diff` is
set: one with and one without color. Then we parse them in parallel and
record which hunks start at which offsets in both.
Note that this is a (slight) deviation from the way the Perl version did
it: we are no longer reading the output of `diff-files` line by line
(which is more natural for Perl than for C), but in one go, and parse
everything later, so we might just as well do it in synchrony.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The code in `git-add--interactive.perl` that takes care of the `patch`
command can look quite intimidating. There are so many modes in which it
can be called, for example.
But for the `patch` command in `git add -i`, only one mode is relevant:
the `stage` mode. And we just implemented the beginnings of that mode in
C so far. So let's use it when `add.interactive.useBuiltin=true`.
Now, while the code in `add-patch.c` is far from reaching feature parity
with the code in `git-add--interactive.perl` (color is not implemented,
the diff algorithm cannot be configured, the colored diff cannot be
post-processed via `interactive.diffFilter`, many commands are
unimplemented yet, etc), hooking it all up with the part of `git add -i`
that is already converted to C makes it easier to test and develop it.
Note: at this stage, both the `add.interactive.useBuiltin` config
setting is still safely opt-in, and will probably be fore quite some
time, to allow for thorough testing "in the wild" without adversely
affecting existing users.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In the previous steps, we re-implemented the main loop of `git add -i`
in C, and most of the commands.
Notably, we left out the actual functionality of `patch`, as the
relevant code makes up more than half of `git-add--interactive.perl`,
and is actually pretty independent of the rest of the commands.
With this commit, we start to tackle that `patch` part. For better
separation of concerns, we keep the code in a separate file,
`add-patch.c`. The new code is still guarded behind the
`add.interactive.useBuiltin` config setting, and for the moment,
it can only be called via `git add -p`.
The actual functionality follows the original implementation of
5cde71d64a (git-add --interactive, 2006-12-10), but not too closely
(for example, we use string offsets rather than copying strings around,
and we also remember which previous/next hunk was undecided, rather than
looking again when the user asked to jump there).
As a further deviation from that commit, We also use a comma instead of
a slash to separate the available commands in the prompt, as the current
version of the Perl script does this, and we also add a line about the
question mark ("print help") to the help text.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Yes, yes, this is supposed to be only a band-aid option for `git add -p`
not Doing The Right Thing. But as long as we carry the `--allow-overlap`
option, we might just as well get it right.
This fixes the case where one hunk inserts a line before the first one,
and a hunk whose context overlaps with the first one's appends a line at
the end.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The first thing `git add -p` does is to generate a diff. If this diff
cannot be generated, `git add -p` should not continue as if nothing
happened, but instead fail.
What we *actually* do here is much broader: we now verify for *every*
`run_cmd_pipe()` call that the spawned process actually succeeded.
Note that we have to change two callers in this patch, as we need to
store the spawned process' output in a local variable, which means that
the callers can no longer decide whether to interpret the `return <$fh>`
in array or in scalar context.
This bug was noticed while writing a test case for the diff.algorithm
feature, and we let that test case double as a regression test for this
fixed bug, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Without this patch, there is actually no test in Git's test suite that
covers the diff.algorithm feature. Let's add one.
We do this by passing a bogus value and then expecting `git diff-files`
to produce the appropriate error message.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In preparation for re-implementing `git add -p` in pure C (where we will
purposefully keep the implementation of `git add -p` separate from the
implementation of `git add -i`), let's verify that the user is told the
same things as in the Perl version when the diff file is either empty or
contains only entries about binary files.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The `git add -p` command offers different prompts for regular diff hunks
vs mode change pseudo hunks vs diffs deleting files.
Let's cover this in the regresion test suite, in preparation for
re-implementing `git add -p` in C.
For the mode change prompt, we use a trick that lets this test case pass
even on systems without executable bit, i.e. where `core.filemode =
false` (such as Windows): we first add the file to the index with `git
add --chmod=+x`, and then call `git add -p` with `core.filemode` forced
to `true`. The file on disk has no executable bit set, therefore we will
see a mode change.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The TTY prerequisite is a rather heavy one: it not only requires Perl to
work, but also the IO/Pty.pm module (with native support, and it
requires pseudo terminals, too).
In particular, test cases marked with the TTY prerequisite would be
skipped in Git for Windows' SDK.
In the case of `git add -p`, we do not actually need that big a hammer,
as we do not want to test any functionality that requires a pseudo
terminal; all we want is to talk the interactive add command to use
color, even when being called from within the test suite.
And we found exactly such a trick earlier already: when we added a test
case to verify that the main loop of `git add -i` is colored
appropriately. Let's use that trick instead of the TTY prerequisite.
While at it, we avoid the pipes, as we do not want a SIGPIPE to break
the regression test cases (which will be much more likely when we do not
run everything through Perl because that is inherently slower).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In this developer's workflows, it often happens that a hunk needs to be
edited in a way that adds lines, and even reduces the context
Let's add a regression test for this.
Note that just like the preceding test case, the new test case is *not*
handled gracefully by the current `git add -p`. It will be handled
correctly by the upcoming built-in `git add -p`, though.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It is not only laziness that we simply spawn `git diff -p --cached`
here: this command needs to use the pager, and the pager needs to exit
when the diff is done. Currently we do not have any way to make that
happen if we run the diff in-process. So let's just spawn.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Well, it is not a full implementation yet. In the interest of making
this easy to review (and easy to keep bugs out), we still hand off to
the Perl script to do the actual work.
The `patch` functionality actually makes up for more than half of the
1,800+ lines of `git-add--interactive.perl`. It will be ported from Perl
to C incrementally, later.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is yet another command, ported to C. It builds nicely on the
support functions introduced for other commands, with the notable
difference that only names are displayed for untracked files, no
file type or diff summary.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is a relatively straight-forward port from the Perl version, with
the notable exception that we imitate `git reset -- <paths>` in the C
version rather than the convoluted `git ls-tree HEAD -- <paths> | git
update-index --index-info` followed by `git update-index --force-remove
-- <paths>` for the missed ones.
While at it, we fix the pretty obvious bug where the `revert` command
offers to unstage files that do not have staged changes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
After `status` and `help`, it is now turn to port the `update` command
to C, the second command that is shown in the main loop menu of `git add
-i`.
This `git add -i` command is the first one which lets the user choose a
subset of a list of files, and as such, this patch lays the groundwork
for the other commands of that category:
- It teaches the `print_file_item()` function to show a unique prefix
if we found any (the code to find it had been added already in the
previous patch where we colored the unique prefixes of the main loop
commands, but that patch uses the `print_command_item()` function to
display the menu items).
- This patch also adds the help text that is shown when the user input
to select items from the shown list could not be parsed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The `upgrade`, `revert` and `add-untracked` commands allow selecting
multiple entries. Let's extend the `list_and_choose()` function to
accommodate those use cases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In `update` command of `git add -i`, we are primarily interested in the
list of modified files that have worktree (i.e. unstaged) changes.
The Perl script version of `git add -i` has a parameter of the
`list_modified()` function for that matter. In C, we can be a lot more
precise, using an `enum`.
The C implementation of the filter also has an easier time to avoid
unnecessary work, simply by using an adaptive order of the `diff-index`
and `diff-files` calls, and then not adding unnecessary entries in the
first place.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This imitates the code to show the help text from the Perl script
`git-add--interactive.perl` in the built-in version.
To make sure that it renders exactly like the Perl version of `git add
-i`, we also add a test case for that to `t3701-add-interactive.sh`.
Signed-off-by: Slavica Djukic <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The error messages as well as the unique prefixes are colored in `git
add -i` by default; We need to do the same in the built-in version.
Signed-off-by: Slavica Djukic <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With this change, we print out the same colored help text that the
Perl-based `git add -i` prints in the main loop when question mark is
entered.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Just like in the Perl script `git-add--interactive.perl`, for each
command a unique prefix is determined (if there exists any within the
given parameters), and shown in the list, and accepted as a shortcut for
the command.
We use the prefix map implementation that we just added in the previous
commit for that purpose.
Signed-off-by: Slavica Djukic <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
In the `git add -i` command, we show unique prefixes of the commands and
files, to give an indication what prefix would select them.
Naturally, the C implementation looks a lot different than the Perl
implementation: in Perl, a trie is much easier implemented, while we
already have a pretty neat hashmap implementation in C that we use for
the purpose of storing (not necessarily unique) prefixes.
The idea: for each item that we add, we generate prefixes starting with
the first letter, then the first two letters, then three, etc, until we
find a prefix that is unique (or until the prefix length would be
longer than we want). If we encounter a previously-unique prefix on the
way, we adjust that item's prefix to make it unique again (or we mark it
as having no unique prefix if we failed to find one). These partial
prefixes are stored in a hash map (for quick lookup times).
To make sure that this function works as expected, we add a test using a
special-purpose test helper that was added for that purpose.
Note: We expect the list of prefix items to be passed in as a list of
pointers rather than as regular list to avoid having to copy information
(the actual items will most likely contain more information than just
the name and the length of the unique prefix, but passing in `struct
prefix_item *` would not allow for that).
Signed-off-by: Slavica Djukic <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The reason why we did not start with the main loop to begin with is that
it is the first user of `list_and_choose()`, which uses the `list()`
function that we conveniently introduced for use by the `status`
command.
Apart from the "and choose" part, there are more differences between the
way the `status` command calls the `list_and_choose()` function in the
Perl version of `git add -i` compared to the other callers of said
function. The most important ones:
- The list is not only shown, but the user is also asked to make a
choice, possibly selecting multiple entries.
- The list of items is prefixed with a marker indicating what items have
been selected, if multi-selection is allowed.
- Initially, for each item a unique prefix (if there exists any within
the given parameters) is determined, and shown in the list, and
accepted as a shortcut for the selection.
These features will be implemented later, except the part where the user
can choose a command. At this stage, though, the built-in `git add -i`
still only supports the `status` command, with the remaining commands to
follow over the course of the next commits.
In addition, we also modify `list()` to support displaying the commands
in columns, even if there is currently only one.
The Perl script `git-add--interactive.perl` mixed the purposes of the
"list" and the "and choose" part into the same function. In the C
version, we will keep them separate instead, calling the `list()`
function from the `list_and_choose()` function.
Note that we only have a prompt ending in a single ">" at this stage;
later commits will add commands that display a double ">>" to indicate
that the user is in a different loop than the main one.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
For simplicity, we only implemented the `status` command without colors.
This patch starts adding color, matching what the Perl script
`git-add--interactive.perl` does.
Original-Patch-By: Daniel Ferreira <bnmvco@gmail.com>
Signed-off-by: Slavica Djukic <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is what the Perl version does, and therefore it is what the
built-in version should do, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This implements the `status` command of `git add -i`. The data
structures introduced in this commit will be extended as needed later.
At this point, we re-implement only part of the `list_and_choose()`
function of the Perl script `git-add--interactive.perl` and call it
`list()`. It does not yet color anything, or do columns, or allow user
input.
Over the course of the next commits, we will introduce a
`list_and_choose()` function that uses `list()` to display the list of
options and let the user choose one or more of the displayed items. This
will be used to implement the main loop of the built-in `git add -i`, at
which point the new `status` command can actually be used.
Note that we pass the list of items as a `struct item **` as opposed to
a `struct item *`, to allow for the actual items to contain much more
information than merely the name.
Signed-off-by: Daniel Ferreira <bnmvco@gmail.com>
Signed-off-by: Slavica Djukic <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Make the diffstat interface (namely, the diffstat_t struct and
compute_diffstat) no longer be internal to diff.c and allow it to be used
by other parts of git.
This is helpful for code that may want to easily extract information
from files using the diff machinery, while flushing it differently from
how the show_* functions used by diff_flush() do it. One example is the
builtin implementation of git-add--interactive's status.
Signed-off-by: Daniel Ferreira <bnmvco@gmail.com>
Signed-off-by: Slavica Djukic <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is hardly the first conversion of a Git command that is implemented
as a script to a built-in. So far, the most successful strategy for such
conversions has been to add a built-in helper and call that for more and
more functionality from the script, as more and more parts are
converted.
With the interactive add, we choose a different strategy. The sole
reason for this is that on Windows (where such a conversion has the most
benefits in terms of speed and robustness) we face the very specific
problem that a `system()` call in Perl seems to close `stdin` in the
parent process when the spawned process consumes even one character from
`stdin`. And that just does not work for us here, as it would stop the
main loop as soon as any interactive command was performed by the
helper. Which is almost all of the commands in `git add -i`.
It is almost as if Perl told us once again that it does not want us to
use it on Windows.
Instead, we follow the opposite route where we start with a bare-bones
version of the built-in interactive add, guarded by the new
`add.interactive.useBuiltin` config variable, and then add more and more
functionality to it, until it is feature complete.
At this point, the built-in version of `git add -i` only states that it
cannot do anything yet ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We need to make sure that MinGit/Portable Git only pick up a legitimate
ProgramData config.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Inspired by 21416f0a07 ("restore: fix typo in docs", 2019-08-03), I ran
"git grep -E '(\b[a-zA-Z]+) \1\b' -- Documentation/" to find other cases
where words were duplicated, e.g. "the the", and in most cases removed
one of the repeated words.
There were many false positives by this grep command, including
deliberate repeated words like "really really" or valid uses of "that
that" which I left alone, of course.
I also did not correct any of the legitimate, accidentally repeated
words in old RelNotes.
Signed-off-by: Mark Rushakoff <mark.rushakoff@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
My IEE 'home for life' email service is being withdrawn on 30 Sept 2019.
Replace with my new email domain.
I also have a secondary (backup) 'home for life' through
<philipoakley@dunelm.org.uk>.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git 2.23-rc2
* tag 'v2.23.0-rc2' of git://git.kernel.org/pub/scm/git/git: (63 commits)
Git 2.23-rc2
t0000: reword comments for "local" test
t: decrease nesting in test_oid_to_path
sha1-file: release strbuf after use
test-dir-iterator: use path argument directly
dir-iterator: release strbuf after use
commit-graph: release strbufs after use
l10n: reformat some localized strings for v2.23.0
merge-recursive: avoid directory rename detection in recursive case
commit-graph: fix bug around octopus merges
restore: fix typo in docs
doc: typo: s/can not/cannot/ and s/is does/does/
Git 2.23-rc1
log: really flip the --mailmap default
RelNotes/2.23.0: fix a few typos and other minor issues
RelNotes/2.21.1: typofix
log: flip the --mailmap default unconditionally
config: work around bug with includeif:onbranch and early config
A few more last-minute fixes
repack: simplify handling of auto-bitmaps and .keep files
...
