This patch series implements the rest of the commands in `git add -i`'s
main loop: `update`, `revert`, `add_untracked`, `patch`, `diff`, and
`quit`. Apart from `quit`, these commands are all very similar in that
they first build a list of files, display it, let the user choose which
ones to act on, and then perform the action.
Note that the `patch` command is not actually converted to C, not
completely at least: the built-in version simply hands off to `git
add--interactive` after letting the user select which files to act on.
The reason for this omission is practicality. Out of the 1,800+ lines of
`git-add--interactive.perl`, over a thousand deal *just* with the `git
add -p` part. I did convert that functionality already (to be
contributed in a separate patch series), discovering that there is so
little overlap between the `git add --patch` part and the rest of `git
add --interactive` that I could put the former into a totally different
file: `add-patch.c`. Just a teaser ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The first part of the long journey to a fully built-in `git add -i`.
It reflects the part that was submitted a couple of times (see
https://github.com/gitgitgadget/git/pull/103) during the Outreachy
project by Slavica Đukić that continued the journey based on an initial
patch series by Daniel Ferreira.
This part only implements the `status` and the `help` part, like
Slavica's last iteration did, in the interest of making the review
remotely more reviewable. I fear that this attempt of making it a bit
more reviewable is pretty futile, as so many things changed. So I will
ask the reviewers for forgiveness: please be kind, and give this sort of
a fresh review.
I threw in a couple of major changes on top of that iteration, though:
- The original plan was to add a helper (`git add--helper`) that takes
over more and more responsibility from the Perl script over the course
of the conversion.
This plan is no longer in effect, as I encountered a serious problem
with that: the MSYS2 runtime used by the Perl interpreter which Git
for Windows employs to run `git add -i` has a curious bug (that is
safely outside the purview of this here patch series) where it fails
to read from standard input after it spawned a non-MSYS2 program that
reads from standard input. To keep my `git add -i` in a working state,
I therefore adopted a different strategy:
Just like `git difftool` was converted by starting with a built-in
that did nothing but handing off to the scripted version, guarded by
the (opt-in) `difftool.useBuiltin` config setting, I start this patch
series by a built-in `add -i` that does nothing else but state that it
is not implemented yet, guarded by the (opt-in)
`add.interactive.useBuiltin` config setting.
In contrast to the `git difftool` situation, it is quite a bit easier
here, as we do not even have to rename the script to
`git-legacy-add--interactive.perl`: the `add--interactive` command is
an implementation detail that users are not even supposed to know
about. Therefore, we can implement that road fork between the built-in
and the scripted version in `builtin/add.c`, i.e. in the user-facing
`git add` command.
This will also naturally help with the transition to a fully built-in
`git add -i`/`git add -p`, as we saw with the built-in `git rebase`
how important it is for end users to have an escape hatch (and for
that reason, tried our best to provide the same with the built-in `git
stash`).
- The `help` command was actually not hooked up in `git add -i`, but was
only available as a special option of the `git add--helper` command.
As that command no longer exists, I kind of *had* to implement
some way to let the built-in `git add -i` show the help text.
- The main loop of `git add -i` (i.e. the thing that lets you choose
`status` or `help`) is now implemented (but only lists `status` and
`help`, of course), as it makes use of that feature that took the main
chunk of the Outreachy project: the function to determine unique
prefixes of a list of strings.
- Speaking of the unique prefixes: the functionality to determine those
is now encapsulated in the `prefix-map.c` file, and I also added a
regression test.
- Speaking of the tests: I also implemented support for the environment
variable `GIT_TEST_ADD_I_USE_BUILTIN`: by setting it, the test suite
can be forced to use the built-in, or the Perl script, version of `git
add -i`. Needless to say: by the end of this patch series, running the
test suite with `GIT_TEST_ADD_I_USE_BUILTIN=true` will still result in
a ton of test failures due to not-yet-implemented commands, but it
will also demonstrate what *already* works.
- Since the main loop starts not only by showing the status, but
refreshes the index before that, I added that, and I actually
refactored that code into a new function
(`repo_refresh_and_write_index()`), as it will be used a couple of
times by the end of the complete conversion of `git add -i` into a
built-in command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It is not only laziness that we simply spawn `git diff -p --cached`
here: this command needs to use the pager, and the pager needs to exit
when the diff is done. Currently we do not have any way to make that
happen if we run the diff in-process. So let's just spawn.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Well, it is not a full implementation yet. In the interest of making
this easy to review (and easy to keep bugs out), we still hand off to
the Perl script to do the actual work.
The `patch` functionality actually makes up for more than half of the
1,800+ lines of `git-add--interactive.perl`. It will be ported from Perl
to C incrementally, later.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is yet another command, ported to C. It builds nicely on the
support functions introduced for other commands, with the notable
difference that only names are displayed for untracked files, no
file type or diff summary.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This imitates the code to show the help text from the Perl script
`git-add--interactive.perl` in the built-in version.
To make sure that it renders exactly like the Perl version of `git add
-i`, we also add a test case for that to `t3701-add-interactive.sh`.
Signed-off-by: Slavica Djukic <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is a relatively straight-forward port from the Perl version, with
the notable exception that we imitate `git reset -- <paths>` in the C
version rather than the convoluted `git ls-tree HEAD -- <paths> | git
update-index --index-info` followed by `git update-index --force-remove
-- <paths>` for the missed ones.
While at it, we fix the pretty obvious bug where the `revert` command
offers to unstage files that do not have staged changes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The error messages as well as the unique prefixes are colored in `git
add -i` by default; We need to do the same in the built-in version.
Signed-off-by: Slavica Djukic <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
After `status` and `help`, it is now turn to port the `update` command
to C, the second command that is shown in the main loop menu of `git add
-i`.
This `git add -i` command is the first one which lets the user choose a
subset of a list of files, and as such, this patch lays the groundwork
for the other commands of that category:
- It teaches the `print_file_item()` function to show a unique prefix
if we found any (the code to find it had been added already in the
previous patch where we colored the unique prefixes of the main loop
commands, but that patch uses the `print_command_item()` function to
display the menu items).
- This patch also adds the help text that is shown when the user input
to select items from the shown list could not be parsed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With this change, we print out the same colored help text that the
Perl-based `git add -i` prints in the main loop when question mark is
entered.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The `upgrade`, `revert` and `add-untracked` commands allow selecting
multiple entries. Let's extend the `list_and_choose()` function to
accommodate those use cases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Just like in the Perl script `git-add--interactive.perl`, for each
command a unique prefix is determined (if there exists any within the
given parameters), and shown in the list, and accepted as a shortcut for
the command.
We use the prefix map implementation that we just added in the previous
commit for that purpose.
Signed-off-by: Slavica Djukic <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
In `update` command of `git add -i`, we are primarily interested in the
list of modified files that have worktree (i.e. unstaged) changes.
The Perl script version of `git add -i` has a parameter of the
`list_modified()` function for that matter. In C, we can be a lot more
precise, using an `enum`.
The C implementation of the filter also has an easier time to avoid
unnecessary work, simply by using an adaptive order of the `diff-index`
and `diff-files` calls, and then not adding unnecessary entries in the
first place.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In the `git add -i` command, we show unique prefixes of the commands and
files, to give an indication what prefix would select them.
Naturally, the C implementation looks a lot different than the Perl
implementation: in Perl, a trie is much easier implemented, while we
already have a pretty neat hashmap implementation in C that we use for
the purpose of storing (not necessarily unique) prefixes.
The idea: for each item that we add, we generate prefixes starting with
the first letter, then the first two letters, then three, etc, until we
find a prefix that is unique (or until the prefix length would be
longer than we want). If we encounter a previously-unique prefix on the
way, we adjust that item's prefix to make it unique again (or we mark it
as having no unique prefix if we failed to find one). These partial
prefixes are stored in a hash map (for quick lookup times).
To make sure that this function works as expected, we add a test using a
special-purpose test helper that was added for that purpose.
Note: We expect the list of prefix items to be passed in as a list of
pointers rather than as regular list to avoid having to copy information
(the actual items will most likely contain more information than just
the name and the length of the unique prefix, but passing in `struct
prefix_item *` would not allow for that).
Signed-off-by: Slavica Djukic <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The reason why we did not start with the main loop to begin with is that
it is the first user of `list_and_choose()`, which uses the `list()`
function that we conveniently introduced for use by the `status`
command.
Apart from the "and choose" part, there are more differences between the
way the `status` command calls the `list_and_choose()` function in the
Perl version of `git add -i` compared to the other callers of said
function. The most important ones:
- The list is not only shown, but the user is also asked to make a
choice, possibly selecting multiple entries.
- The list of items is prefixed with a marker indicating what items have
been selected, if multi-selection is allowed.
- Initially, for each item a unique prefix (if there exists any within
the given parameters) is determined, and shown in the list, and
accepted as a shortcut for the selection.
These features will be implemented later, except the part where the user
can choose a command. At this stage, though, the built-in `git add -i`
still only supports the `status` command, with the remaining commands to
follow over the course of the next commits.
In addition, we also modify `list()` to support displaying the commands
in columns, even if there is currently only one.
The Perl script `git-add--interactive.perl` mixed the purposes of the
"list" and the "and choose" part into the same function. In the C
version, we will keep them separate instead, calling the `list()`
function from the `list_and_choose()` function.
Note that we only have a prompt ending in a single ">" at this stage;
later commits will add commands that display a double ">>" to indicate
that the user is in a different loop than the main one.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
For simplicity, we only implemented the `status` command without colors.
This patch starts adding color, matching what the Perl script
`git-add--interactive.perl` does.
Original-Patch-By: Daniel Ferreira <bnmvco@gmail.com>
Signed-off-by: Slavica Djukic <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is what the Perl version does, and therefore it is what the
built-in version should do, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This implements the `status` command of `git add -i`. The data
structures introduced in this commit will be extended as needed later.
At this point, we re-implement only part of the `list_and_choose()`
function of the Perl script `git-add--interactive.perl` and call it
`list()`. It does not yet color anything, or do columns, or allow user
input.
Over the course of the next commits, we will introduce a
`list_and_choose()` function that uses `list()` to display the list of
options and let the user choose one or more of the displayed items. This
will be used to implement the main loop of the built-in `git add -i`, at
which point the new `status` command can actually be used.
Note that we pass the list of items as a `struct item **` as opposed to
a `struct item *`, to allow for the actual items to contain much more
information than merely the name.
Signed-off-by: Daniel Ferreira <bnmvco@gmail.com>
Signed-off-by: Slavica Djukic <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Make the diffstat interface (namely, the diffstat_t struct and
compute_diffstat) no longer be internal to diff.c and allow it to be used
by other parts of git.
This is helpful for code that may want to easily extract information
from files using the diff machinery, while flushing it differently from
how the show_* functions used by diff_flush() do it. One example is the
builtin implementation of git-add--interactive's status.
Signed-off-by: Daniel Ferreira <bnmvco@gmail.com>
Signed-off-by: Slavica Djukic <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is hardly the first conversion of a Git command that is implemented
as a script to a built-in. So far, the most successful strategy for such
conversions has been to add a built-in helper and call that for more and
more functionality from the script, as more and more parts are
converted.
With the interactive add, we choose a different strategy. The sole
reason for this is that on Windows (where such a conversion has the most
benefits in terms of speed and robustness) we face the very specific
problem that a `system()` call in Perl seems to close `stdin` in the
parent process when the spawned process consumes even one character from
`stdin`. And that just does not work for us here, as it would stop the
main loop as soon as any interactive command was performed by the
helper. Which is almost all of the commands in `git add -i`.
It is almost as if Perl told us once again that it does not want us to
use it on Windows.
Instead, we follow the opposite route where we start with a bare-bones
version of the built-in interactive add, guarded by the new
`add.interactive.useBuiltin` config variable, and then add more and more
functionality to it, until it is feature complete.
At this point, the built-in version of `git add -i` only states that it
cannot do anything yet ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We need to make sure that MinGit/Portable Git only pick up a legitimate
ProgramData config.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Inspired by 21416f0a07 ("restore: fix typo in docs", 2019-08-03), I ran
"git grep -E '(\b[a-zA-Z]+) \1\b' -- Documentation/" to find other cases
where words were duplicated, e.g. "the the", and in most cases removed
one of the repeated words.
There were many false positives by this grep command, including
deliberate repeated words like "really really" or valid uses of "that
that" which I left alone, of course.
I also did not correct any of the legitimate, accidentally repeated
words in old RelNotes.
Signed-off-by: Mark Rushakoff <mark.rushakoff@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
My IEE 'home for life' email service is being withdrawn on 30 Sept 2019.
Replace with my new email domain.
I also have a secondary (backup) 'home for life' through
<philipoakley@dunelm.org.uk>.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git 2.23-rc2
* tag 'v2.23.0-rc2' of git://git.kernel.org/pub/scm/git/git: (63 commits)
Git 2.23-rc2
t0000: reword comments for "local" test
t: decrease nesting in test_oid_to_path
sha1-file: release strbuf after use
test-dir-iterator: use path argument directly
dir-iterator: release strbuf after use
commit-graph: release strbufs after use
l10n: reformat some localized strings for v2.23.0
merge-recursive: avoid directory rename detection in recursive case
commit-graph: fix bug around octopus merges
restore: fix typo in docs
doc: typo: s/can not/cannot/ and s/is does/does/
Git 2.23-rc1
log: really flip the --mailmap default
RelNotes/2.23.0: fix a few typos and other minor issues
RelNotes/2.21.1: typofix
log: flip the --mailmap default unconditionally
config: work around bug with includeif:onbranch and early config
A few more last-minute fixes
repack: simplify handling of auto-bitmaps and .keep files
...
Compilation fix.
* cb/xdiff-no-system-includes-in-dot-c:
xdiff: remove duplicate headers from xpatience.c
xdiff: remove duplicate headers from xhistogram.c
xdiff: drop system includes in xutils.c
The internal diff machinery can be made to read out of bounds while
looking for --funcion-context line in a corner case, which has been
corrected.
* jk/xdiff-clamp-funcname-context-index:
xdiff: clamp function context indices in post-image
This branch allows third-party tools to call `git status
--no-lock-index` to avoid lock contention with the interactive Git usage
of the actual human user.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
