Teach FSCACHE to remember "not found" directories.
This is a performance optimization.
FSCACHE is a performance optimization available for Windows. It
intercepts Posix-style lstat() calls into an in-memory directory
using FindFirst/FindNext. It improves performance on Windows by
catching the first lstat() call in a directory, using FindFirst/
FindNext to read the list of files (and attribute data) for the
entire directory into the cache, and short-cut subsequent lstat()
calls in the same directory. This gives a major performance
boost on Windows.
However, it does not remember "not found" directories. When STATUS
runs and there are missing directories, the lstat() interception
fails to find the parent directory and simply return ENOENT for the
file -- it does not remember that the FindFirst on the directory
failed. Thus subsequent lstat() calls in the same directory, each
re-attempt the FindFirst. This completely defeats any performance
gains.
This can be seen by doing a sparse-checkout on a large repo and
then doing a read-tree to reset the skip-worktree bits and then
running status.
This change reduced status times for my very large repo by 60%.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Windows paths are typically limited to MAX_PATH = 260 characters, even
though the underlying NTFS file system supports paths up to 32,767 chars.
This limitation is also evident in Windows Explorer, cmd.exe and many
other applications (including IDEs).
Particularly annoying is that most Windows APIs return bogus error codes
if a relative path only barely exceeds MAX_PATH in conjunction with the
current directory, e.g. ERROR_PATH_NOT_FOUND / ENOENT instead of the
infinitely more helpful ERROR_FILENAME_EXCED_RANGE / ENAMETOOLONG.
Many Windows wide char APIs support longer than MAX_PATH paths through the
file namespace prefix ('\\?\' or '\\?\UNC\') followed by an absolute path.
Notable exceptions include functions dealing with executables and the
current directory (CreateProcess, LoadLibrary, Get/SetCurrentDirectory) as
well as the entire shell API (ShellExecute, SHGetSpecialFolderPath...).
Introduce a handle_long_path function to check the length of a specified
path properly (and fail with ENAMETOOLONG), and to optionally expand long
paths using the '\\?\' file namespace prefix. Short paths will not be
modified, so we don't need to worry about device names (NUL, CON, AUX).
Contrary to MSDN docs, the GetFullPathNameW function doesn't seem to be
limited to MAX_PATH (at least not on Win7), so we can use it to do the
heavy lifting of the conversion (translate '/' to '\', eliminate '.' and
'..', and make an absolute path).
Add long path error checking to xutftowcs_path for APIs with hard MAX_PATH
limit.
Add a new MAX_LONG_PATH constant and xutftowcs_long_path function for APIs
that support long paths.
While improved error checking is always active, long paths support must be
explicitly enabled via 'core.longpaths' option. This is to prevent end
users to shoot themselves in the foot by checking out files that Windows
Explorer, cmd/bash or their favorite IDE cannot handle.
Test suite:
Test the case is when the full pathname length of a dir is close
to 260 (MAX_PATH).
Bug report and an original reproducer by Andrey Rogozhnikov:
https://github.com/msysgit/git/pull/122#issuecomment-43604199
Note that the test cannot rely on the presence of short names, as they
are not enabled by default except on the system drive.
[jes: adjusted test number to avoid conflicts, reinstated && chain,
adjusted test to work without short names]
Thanks-to: Martin W. Kirst <maki@bitkings.de>
Thanks-to: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Original-test-by: Andrey Rogozhnikov <rogozhnikov.andrey@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Windows paths are typically limited to MAX_PATH = 260 characters, even
though the underlying NTFS file system supports paths up to 32,767 chars.
This limitation is also evident in Windows Explorer, cmd.exe and many
other applications (including IDEs).
Particularly annoying is that most Windows APIs return bogus error codes
if a relative path only barely exceeds MAX_PATH in conjunction with the
current directory, e.g. ERROR_PATH_NOT_FOUND / ENOENT instead of the
infinitely more helpful ERROR_FILENAME_EXCED_RANGE / ENAMETOOLONG.
Many Windows wide char APIs support longer than MAX_PATH paths through the
file namespace prefix ('\\?\' or '\\?\UNC\') followed by an absolute path.
Notable exceptions include functions dealing with executables and the
current directory (CreateProcess, LoadLibrary, Get/SetCurrentDirectory) as
well as the entire shell API (ShellExecute, SHGetSpecialFolderPath...).
Introduce a handle_long_path function to check the length of a specified
path properly (and fail with ENAMETOOLONG), and to optionally expand long
paths using the '\\?\' file namespace prefix. Short paths will not be
modified, so we don't need to worry about device names (NUL, CON, AUX).
Contrary to MSDN docs, the GetFullPathNameW function doesn't seem to be
limited to MAX_PATH (at least not on Win7), so we can use it to do the
heavy lifting of the conversion (translate '/' to '\', eliminate '.' and
'..', and make an absolute path).
Add long path error checking to xutftowcs_path for APIs with hard MAX_PATH
limit.
Add a new MAX_LONG_PATH constant and xutftowcs_long_path function for APIs
that support long paths.
While improved error checking is always active, long paths support must be
explicitly enabled via 'core.longpaths' option. This is to prevent end
users to shoot themselves in the foot by checking out files that Windows
Explorer, cmd/bash or their favorite IDE cannot handle.
Test suite:
Test the case is when the full pathname length of a dir is close
to 260 (MAX_PATH).
Bug report and an original reproducer by Andrey Rogozhnikov:
https://github.com/msysgit/git/pull/122#issuecomment-43604199
[jes: adjusted test number to avoid conflicts]
Thanks-to: Martin W. Kirst <maki@bitkings.de>
Thanks-to: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Original-test-by: Andrey Rogozhnikov <rogozhnikov.andrey@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
[jes: adusted test number to avoid conflicts, fixed non-portable use of
the 'export' statement]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
If multiple threads access a directory that is not yet in the cache, the
directory will be loaded by each thread. Only one of the results is added
to the cache, all others are leaked. This wastes performance and memory.
On cache miss, add a future object to the cache to indicate that the
directory is currently being loaded. Subsequent threads register themselves
with the future object and wait. When the first thread has loaded the
directory, it replaces the future object with the result and notifies
waiting threads.
Signed-off-by: Karsten Blees <blees@dcon.de>
Checking the work tree status is quite slow on Windows, due to slow lstat
emulation (git calls lstat once for each file in the index). Windows
operating system APIs seem to be much better at scanning the status
of entire directories than checking single files.
Add an lstat implementation that uses a cache for lstat data. Cache misses
read the entire parent directory and add it to the cache. Subsequent lstat
calls for the same directory are served directly from the cache.
Also implement opendir / readdir / closedir so that they create and use
directory listings in the cache.
The cache doesn't track file system changes and doesn't plug into any
modifying file APIs, so it has to be explicitly enabled for git functions
that don't modify the working copy.
Note: in an earlier version of this patch, the cache was always active and
tracked file system changes via ReadDirectoryChangesW. However, this was
much more complex and had negative impact on the performance of modifying
git commands such as 'git checkout'.
Signed-off-by: Karsten Blees <blees@dcon.de>
Add a macro to mark code sections that only read from the file system,
along with a config option and documentation.
This facilitates implementation of relatively simple file system level
caches without the need to synchronize with the file system.
Enable read-only sections for 'git status' and preload_index.
Signed-off-by: Karsten Blees <blees@dcon.de>
Emulating the POSIX lstat API on Windows via GetFileAttributes[Ex] is quite
slow. Windows operating system APIs seem to be much better at scanning the
status of entire directories than checking single files. A caching
implementation may improve performance by bulk-reading entire directories
or reusing data obtained via opendir / readdir.
Make the lstat implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Signed-off-by: Karsten Blees <blees@dcon.de>
Emulating the POSIX dirent API on Windows via FindFirstFile/FindNextFile is
pretty staightforward, however, most of the information provided in the
WIN32_FIND_DATA structure is thrown away in the process. A more
sophisticated implementation may cache this data, e.g. for later reuse in
calls to lstat.
Make the dirent implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Define a base DIR structure with pointers to readdir/closedir that match
the opendir implementation (i.e. similar to vtable pointers in OOP).
Define readdir/closedir so that they call the function pointers in the DIR
structure. This allows to choose the opendir implementation on a
call-by-call basis.
Move the fixed sized dirent.d_name buffer to the dirent-specific DIR
structure, as d_name may be implementation specific (e.g. a caching
implementation may just set d_name to point into the cache instead of
copying the entire file name string).
Signed-off-by: Karsten Blees <blees@dcon.de>
Git for Windows ships with its own Perl interpreter, and insists on
using it, so it will most likely wreak havoc if PERL5LIB is set before
launching Git.
Let's just unset that environment variables when spawning processes.
To make this feature extensible (and overrideable), there is a new
config setting `core.unsetenvvars` that allows specifying a
comma-separated list of names to unset before spawning processes.
Reported by Gabriel Fuhrmann.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In the Git for Windows project, we have ample precendent for config
settings that apply to Windows, and to Windows only.
Let's formalize this concept by introducing a platform_core_config()
function that can be #define'd in a platform-specific manner.
This will allow us to contain platform-specific code better, as the
corresponding variables no longer need to be exported so that they can
be defined in environment.c and be set in config.c
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is the convention elsewhere (and prepares for the case where we may
need to pass callback data).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A regression fix for 2.11 that made the code to read the list of
alternate object stores overrun the end of the string.
* jk/info-alternates-fix:
read_info_alternates: warn on non-trivial errors
read_info_alternates: read contents into strbuf
"git fetch <there> <src>:<dst>" allows an object name on the <src>
side when the other side accepts such a request since Git v2.5, but
the documentation was left stale.
* jc/fetch-refspec-doc-update:
fetch doc: src side of refspec could be full SHA-1
Many codepaths did not diagnose write failures correctly when disks
go full, due to their misuse of write_in_full() helper function,
which have been corrected.
* jk/write-in-full-fix:
read_pack_header: handle signed/unsigned comparison in read result
config: flip return value of store_write_*()
notes-merge: use ssize_t for write_in_full() return value
pkt-line: check write_in_full() errors against "< 0"
convert less-trivial versions of "write_in_full() != len"
avoid "write_in_full(fd, buf, len) != len" pattern
get-tar-commit-id: check write_in_full() return against 0
config: avoid "write_in_full(fd, buf, len) < len" pattern
The scripts to drive TravisCI has been reorganized and then an
optimization to avoid spending cycles on a branch whose tip is
tagged has been implemented.
* ls/travis-scriptify:
travis-ci: fix "skip_branch_tip_with_tag()" string comparison
travis: dedent a few scripts that are indented overly deeply
travis-ci: skip a branch build if equal tag is present
travis-ci: move Travis CI code into dedicated scripts
The checkpoint command "git fast-import" did not flush updates to
refs and marks unless at least one object was created since the
last checkpoint, which has been corrected, as these things can
happen without any new object getting created.
* er/fast-import-dump-refs-on-checkpoint:
fast-import: checkpoint: dump branches/tags/marks even if object_count==0
"git fast-export" with -M/-C option issued "copy" instruction on a
path that is simultaneously modified, which was incorrect.
* jt/fast-export-copy-modify-fix:
fast-export: do not copy from modified file
"git branch -M a b" while on a branch that is completely unrelated
to either branch a or branch b misbehaved when multiple worktree
was in use. This has been fixed.
* nd/worktree-kill-parse-ref:
branch: fix branch renaming not updating HEADs correctly
This patch was contributed to upstream Git, but without the #include in
compat/win32.h. Let's adjust our patch to reflect that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is the "theoretically more correct" approach of simply
stepping back to the state before plumbing commands started paying
attention to "color.ui" configuration variable.
* jk/ref-filter-colors-fix:
tag: respect color.ui config
Revert "color: check color.ui in git_default_config()"
Revert "t6006: drop "always" color config tests"
Revert "color: make "always" the same as "auto" in config"
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
Improve behaviour of "git fsck" upon finding a missing object.
* rs/fsck-null-return-from-lookup:
fsck: handle NULL return of lookup_blob() and lookup_tree()
Code clean-up.
* jk/validate-headref-fix:
validate_headref: use get_oid_hex for detached HEADs
validate_headref: use skip_prefix for symref parsing
validate_headref: NUL-terminate HEAD buffer
