This is needed for the next change, where we add HOST_CPU support to the
CMake definition.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This simplifies the workflow dramatically, as well as accelerating it
because the Action recently learned to use the partial clone/parallel
checkout features of Git.
Note that we have to reinstate that `/usr/bin/git` hack (a shell script
that simply redirects to `/mingw64/bin/git.exe`) in the `pkg` job
manually, since we no longer cache the `build-installers` artifact
_after_ installing that hack in `bundle-artifacts`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git's regular Makefile mentions that HOST_CPU should be defined when cross-compiling Git: 37796bca76/Makefile (L438-L439)
This is then used to set the GIT_HOST_CPU variable when compiling Git: 37796bca76/Makefile (L1337-L1341)
Then, when the user runs `git version --build-options`, it returns that value: 37796bca76/help.c (L658)
This commit adds the same functionality to the CMake configuration. Users can now set -DHOST_CPU= to set the target architecture.
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
We cannot just check out the current revision: The user might have
overridden `REPOSITORY` and `REF` via the workflow dispatch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This workflow needs to be triggered manually, and it offers to specify a
couple input parameters. But none of them are required. Make that
explicit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When the user asked for `installer-x86_64`, there is no point in
building `pkg-i686` or `build-arm64`; Let's be a bit smarter about this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The workflow allows users to restrict what parts are being built. For
example, `installer-i686` will build only the 32-bit installer, not the
64-bit one nor any MinGit flavor.
However, this logic was not extended when introducing support for ARM64:
Instead, we _also_ built the ARM64 installer when the user asked for
`installer-i686`.
Let's allow restricting to `installer-i686` _without_ building the ARM64
version, and allow restricting to `installer-arm64` _just_ for the ARM64
version.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
GitHub workflows run in agents that have quite a bit of stuff in their
`PATH`, e.g. Chocolatey. To make sure that those bits and pieces are
_not_ used to build the artifacts, let's whittle down the `PATH` to
contain the bare minimum.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Since there is no GCM Core for ARM64, let's just install a simple shell
script that calls the i686 version for now.
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The archive and MinGit variants really get bloated because they handle
those as straight copies instead of hard-links.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
There are no Windows/ARM64 agents in GitHub Actions yet, therefore we
just skip adjusting the `vs-test` job for now.
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When building the Pacman packages, we technically do not need the full
`build-installers` artifact (which is substantially larger than the
`makepkg-git` artifact). However, the former is already cached and
includes the latter's files. And it is _so_ much faster to download the
cached (larger) artifact than to download the smaller `makepkg-git`
artifact from Azure Pipelines.
Suggested-by: Dennis Ameling <dennis@dennisameling.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It is a bit expensive to fetch just the git-sdk-64-build-installers
artifact from Azure Pipelines and then to unpack it (takes some 6-7
minutes, typically). Let's cache it if possible.
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In this context, a "feature" is a dependency combined with its own
dependencies.
Signed-off-by: Ian Bearman <ianb@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With this change, users can specify the branch and repository from which
they want to build Git for Windows' artifacts, via the `ref` and
`repository` inputs.
This allows e.g. building `refs/heads/seen` of `git/git` (even if no
`git-artifacts` workflow is configured in that repository), or
`refs/pull/<number>/merge` for a given Pull Request.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Users can now specify which artifacts they want to build, via the
`build_only` input, which is a space-separated list of artifacts. For
example, `installer portable` will build `installer-x86_64`,
`installer-i686`, `portable-x86_64` and `portable-i686`, and an empty or
unset value will build all artifacts.
Please note that the `mingw-w64-git` packages are built always, as it
would be tricky to figure out when they need to be built (for example,
`build_only=portable-x86_64` technically does not need `pkg-i686` to be
built, while `build_only=portable` does).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The two NuGet artifact exists only in the 64-bit version. So let's make
them in a separate, non-matrix job.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The vcpkg downloads may not succeed. Warn careful readers of the time out.
A simple retry will usually resolve the issue.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The vcpkg_install batch file depends on the availability of a
working Git on the CMD path. This may not be present if the user
has selected the 'bash only' option during Git-for-Windows install.
Detect and tell the user about their lack of a working Git in the CMD
window.
Fixes#2348.
A separate PR https://github.com/git-for-windows/build-extra/pull/258
now highlights the recommended path setting during install.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
When the secrets `CODESIGN_P12` and `CODESIGN_PASS` are set, the
workflow will now code-sign the `.exe` files contained in the package.
This should help with a few anti-malware programs, at least when the
certificate saw some action and gained trust.
Note: `CODESIGN_P12` needs to be generated via
cat <certificate>.p12 | base64 | tr '\n' %
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This expects the `GPGKEY` and `PRIVGPGKEY` secrets to be set in the
respective GitHub repository.
The `GPGKEY` value should be of the form
<short-key> --passphrase <pass> --yes --batch --no-tty --pinentry-mode loopback --digest-algo SHA256
and the `PRIVGPGKEY` should be generated via
gpg --export-secret-keys | base64 | tr '\n' %
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows uses MSYS2 as base system, and therefore the Git
binaries are bundled as Pacman package.
This workflow allows building the 64-bit version of this package (which
is called `mingw-w64-x86_64-git`).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The old version we currently use runs in node.js v12.x, which is being
deprecated in GitHub Actions. The new version uses node.js v16.x.
Incidentally, this also avoids the warning about the deprecated
`::set-output::` workflow command because the newer version of the
`github-script` Action uses the recommended new way to specify outputs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Adjust the GitHub CI to newer ubuntu release.
* jx/ci-ubuntu-fix:
ci: install python on ubuntu
ci: use the same version of p4 on both Linux and macOS
ci: remove the pipe after "p4 -V" to catch errors
github-actions: run gcc-8 on ubuntu-20.04 image
Update GitHub CI to use actions/checkout@v3; use of the older
checkout@v2 gets annoying deprecation notices.
* od/ci-use-checkout-v3-when-applicable:
ci(main): upgrade actions/checkout to v3
Update GitHub CI to use actions/checkout@v3; use of the older
checkout@v2 gets annoying deprecation notices.
* od/ci-use-checkout-v3-when-applicable:
ci(main): upgrade actions/checkout to v3
