df5c074bd0
* Update mqtt.markdown * Update cover.mqtt.markdown * Update fan.mqtt.markdown * Update tag.mqtt.markdown * Update lock.mqtt.markdown * Update text.mqtt.markdown * Update event.mqtt.markdown * Update image.mqtt.markdown * Update light.mqtt.markdown * Update scene.mqtt.markdown * Update siren.mqtt.markdown * Update valve.mqtt.markdown * Update button.mqtt.markdown * Update camera.mqtt.markdown * Update notify.mqtt.markdown * Update number.mqtt.markdown * Update select.mqtt.markdown * Update sensor.mqtt.markdown * Update switch.mqtt.markdown * Update update.mqtt.markdown * Update vacuum.mqtt.markdown * Update climate.mqtt.markdown * Update humidifier.mqtt.markdown * Update lawn_mower.mqtt.markdown * Update water_heater.mqtt.markdown * Update binary_sensor.mqtt.markdown * Update device_tracker.mqtt.markdown * Update device_trigger.mqtt.markdown * Update alarm_control_panel.mqtt.markdown
Home Assistant website
This is the source for the Home-Assistant.io website.
Setup
Setting up to contribute to documentation and the process for submitting pull requests is explained in the developer documentation.
Site preview
In order to make the preview available on http://127.0.0.1:4000, use the following bundler command:
bundle exec rake preview
If the preview is not running on your local machine, pass the IP of the target machine from where it should be served as a parameter, i.e. to access on http://192.168.0.123:4000:
bundle exec rake preview[192.168.0.123]
Speeding up site generation
Every release we post long changelogs to the website. This slows down generation of the website significantly! We include some tools to temporarily exclude the blog posts that you're not working on out of the way.
bundle exec rake isolate[filename-of-blogpost]
When you're done working on the site, run the following command to move the posts back again:
bundle exec rake integrate