The Windows Subsystem for Linux (WSL) version 2 allows to use `chmod` on
NTFS volumes provided that they are mounted with metadata enabled (see
https://devblogs.microsoft.com/commandline/chmod-chown-wsl-improvements/
for details), for example:
$ chmod 0755 /mnt/d/test/a.sh
In order to facilitate better collaboration between the Windows
version of Git and the WSL version of Git, we can make the Windows
version of Git also support reading and writing NTFS file modes
in a manner compatible with WSL.
Since this slightly slows down operations where lots of files are
created (such as an initial checkout), this feature is only enabled when
`core.WSLCompat` is set to true. Note that you also have to set
`core.fileMode=true` in repositories that have been initialized without
enabling WSL compatibility.
There are several ways to enable metadata loading for NTFS volumes
in WSL, one of which is to modify `/etc/wsl.conf` by adding:
```
[automount]
enabled = true
options = "metadata,umask=027,fmask=117"
```
And reboot WSL.
It can also be enabled temporarily by this incantation:
$ sudo umount /mnt/c &&
sudo mount -t drvfs C: /mnt/c -o metadata,uid=1000,gid=1000,umask=22,fmask=111
It's important to note that this modification is compatible with, but
does not depend on WSL. The helper functions in this commit can operate
independently and functions normally on devices where WSL is not
installed or properly configured.
Signed-off-by: xungeng li <xungeng@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, symbolic links have a type: a "file symlink" must point at
a file, and a "directory symlink" must point at a directory. If the
type of symlink does not match its target, it doesn't work.
Git does not record the type of symlink in the index or in a tree. On
checkout it'll guess the type, which only works if the target exists
at the time the symlink is created. This may often not be the case,
for example when the link points at a directory inside a submodule.
By specifying `symlink=file` or `symlink=dir` the user can specify what
type of symlink Git should create, so Git doesn't have to rely on
unreliable heuristics.
Signed-off-by: Bert Belder <bertbelder@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, git repositories may have extra files which need cleaned
(e.g., a build directory) that may be arbitrarily deep. Suggest using
`core.longPaths` if such situations are encountered.
Fixes: #2715
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Windows paths are typically limited to MAX_PATH = 260 characters, even
though the underlying NTFS file system supports paths up to 32,767 chars.
This limitation is also evident in Windows Explorer, cmd.exe and many
other applications (including IDEs).
Particularly annoying is that most Windows APIs return bogus error codes
if a relative path only barely exceeds MAX_PATH in conjunction with the
current directory, e.g. ERROR_PATH_NOT_FOUND / ENOENT instead of the
infinitely more helpful ERROR_FILENAME_EXCED_RANGE / ENAMETOOLONG.
Many Windows wide char APIs support longer than MAX_PATH paths through the
file namespace prefix ('\\?\' or '\\?\UNC\') followed by an absolute path.
Notable exceptions include functions dealing with executables and the
current directory (CreateProcess, LoadLibrary, Get/SetCurrentDirectory) as
well as the entire shell API (ShellExecute, SHGetSpecialFolderPath...).
Introduce a handle_long_path function to check the length of a specified
path properly (and fail with ENAMETOOLONG), and to optionally expand long
paths using the '\\?\' file namespace prefix. Short paths will not be
modified, so we don't need to worry about device names (NUL, CON, AUX).
Contrary to MSDN docs, the GetFullPathNameW function doesn't seem to be
limited to MAX_PATH (at least not on Win7), so we can use it to do the
heavy lifting of the conversion (translate '/' to '\', eliminate '.' and
'..', and make an absolute path).
Add long path error checking to xutftowcs_path for APIs with hard MAX_PATH
limit.
Add a new MAX_LONG_PATH constant and xutftowcs_long_path function for APIs
that support long paths.
While improved error checking is always active, long paths support must be
explicitly enabled via 'core.longpaths' option. This is to prevent end
users from shooting themselves in the foot by checking out files that Windows
Explorer, cmd/bash or their favorite IDE cannot handle.
Test suite:
Test the case is when the full pathname length of a dir is close
to 260 (MAX_PATH).
Bug report and an original reproducer by Andrey Rogozhnikov:
https://github.com/msysgit/git/pull/122#issuecomment-43604199
[jes: adjusted test number to avoid conflicts, added support for
chdir(), etc]
Thanks-to: Martin W. Kirst <maki@bitkings.de>
Thanks-to: Doug Kelly <dougk.ff7@gmail.com>
Original-test-by: Andrey Rogozhnikov <rogozhnikov.andrey@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Josh Soref <jsoref@gmail.com>
Add a macro to mark code sections that only read from the file system,
along with a config option and documentation.
This facilitates implementation of relatively simple file system level
caches without the need to synchronize with the file system.
Enable read-only sections for 'git status' and preload_index.
Signed-off-by: Karsten Blees <blees@dcon.de>
There have been too many challenges supporting `git svn`, including lack
of participation in developing/maintaining the required stack.
See https://github.com/git-for-windows/git/issues/5405 for full details.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This introduces `git survey` to Git for Windows ahead of upstream for
the express purpose of getting the path-based analysis in the hands of
more folks.
The inspiration of this builtin is
[`git-sizer`](https://github.com/github/git-sizer), but since that
command relies on `git cat-file --batch` to get the contents of objects,
it has limits to how much information it can provide.
This is mostly a rewrite of the `git survey` builtin that was introduced
into the `microsoft/git` fork in microsoft/git#667. That version had a
lot more bells and whistles, including an analysis much closer to what
`git-sizer` provides.
The biggest difference in this version is that this one is focused on
using the path-walk API in order to visit batches of objects based on a
common path. This allows identifying, for instance, the path that is
contributing the most to the on-disk size across all versions at that
path.
For example, here are the top ten paths contributing to my local Git
repository (which includes `microsoft/git` and `gitster/git`):
```
TOP FILES BY DISK SIZE
============================================================================
Path | Count | Disk Size | Inflated Size
-----------------------------------------+-------+-----------+--------------
whats-cooking.txt | 1373 | 11637459 | 37226854
t/helper/test-gvfs-protocol | 2 | 6847105 | 17233072
git-rebase--helper | 1 | 6027849 | 15269664
compat/mingw.c | 6111 | 5194453 | 463466970
t/helper/test-parse-options | 1 | 3420385 | 8807968
t/helper/test-pkt-line | 1 | 3408661 | 8778960
t/helper/test-dump-untracked-cache | 1 | 3408645 | 8780816
t/helper/test-dump-fsmonitor | 1 | 3406639 | 8776656
po/vi.po | 104 | 1376337 | 51441603
po/de.po | 210 | 1360112 | 71198603
```
This kind of analysis has been helpful in identifying the reasons for
growth in a few internal monorepos. Those findings motivated the changes
in #5157 and #5171.
With this early version in Git for Windows, we can expand the reach of
the experimental tool in advance of it being contributed to the upstream
project.
Unfortunately, this will mean that in the next `microsoft/git` rebase,
Jeff Hostetler's version will need to be pulled out since there are
enough conflicts. These conflicts include how tables are stored and
generated, as the version in this PR is slightly more general to allow
for different kinds of data.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The 'git survey' builtin provides several detail tables, such as "top
files by on-disk size". The size of these tables defaults to 10,
currently.
Allow the user to specify this number via a new --top=<N> option or the
new survey.top config key.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
At the moment, nothing is obvious about the reason for the use of the
path-walk API, but this will become more prevelant in future iterations. For
now, use the path-walk API to sum up the counts of each kind of object.
For example, this is the reachable object summary output for my local repo:
REACHABLE OBJECT SUMMARY
========================
Object Type | Count
------------+-------
Tags | 1343
Commits | 179344
Trees | 314350
Blobs | 184030
Signed-off-by: Derrick Stolee <stolee@gmail.com>
When 'git survey' provides information to the user, this will be presented
in one of two formats: plaintext and JSON. The JSON implementation will be
delayed until the functionality is complete for the plaintext format.
The most important parts of the plaintext format are headers specifying the
different sections of the report and tables providing concreted data.
Create a custom table data structure that allows specifying a list of
strings for the row values. When printing the table, check each column for
the maximum width so we can create a table of the correct size from the
start.
The table structure is designed to be flexible to the different kinds of
output that will be implemented in future changes.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
By default we will scan all references in "refs/heads/", "refs/tags/"
and "refs/remotes/".
Add command line opts let the use ask for all refs or a subset of them
and to include a detached HEAD.
Signed-off-by: Jeff Hostetler <git@jeffhostetler.com>
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Start work on a new 'git survey' command to scan the repository
for monorepo performance and scaling problems. The goal is to
measure the various known "dimensions of scale" and serve as a
foundation for adding additional measurements as we learn more
about Git monorepo scaling problems.
The initial goal is to complement the scanning and analysis performed
by the GO-based 'git-sizer' (https://github.com/github/git-sizer) tool.
It is hoped that by creating a builtin command, we may be able to take
advantage of internal Git data structures and code that is not
accessible from GO to gain further insight into potential scaling
problems.
Co-authored-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Jeff Hostetler <git@jeffhostetler.com>
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Atomic append on windows is only supported on local disk files, and it may
cause errors in other situations, e.g. network file system. If that is the
case, this config option should be used to turn atomic append off.
Co-Authored-By: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: 孙卓识 <sunzhuoshi@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This adds support for a new http.sslAutoClientCert config value.
In cURL 7.77 or later the schannel backend does not automatically send
client certificates from the Windows Certificate Store anymore.
This config value is only used if http.sslBackend is set to "schannel",
and can be used to opt in to the old behavior and force cURL to send
client certificates.
This fixes https://github.com/git-for-windows/git/issues/3292
Signed-off-by: Pascal Muller <pascalmuller@gmail.com>
The native Windows HTTPS backend is based on Secure Channel which lets
the caller decide how to handle revocation checking problems caused by
missing information in the certificate or offline CRL distribution
points.
Unfortunately, cURL chose to handle these problems differently than
OpenSSL by default: while OpenSSL happily ignores those problems
(essentially saying "¯\_(ツ)_/¯"), the Secure Channel backend will error
out instead.
As a remedy, the "no revoke" mode was introduced, which turns off
revocation checking altogether. This is a bit heavy-handed. We support
this via the `http.schannelCheckRevoke` setting.
In https://github.com/curl/curl/pull/4981, we contributed an opt-in
"best effort" strategy that emulates what OpenSSL seems to do.
In Git for Windows, we actually want this to be the default. This patch
makes it so, introducing it as a new value for the
`http.schannelCheckRevoke" setting, which now becmes a tristate: it
accepts the values "false", "true" or "best-effort" (defaulting to the
last one).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Since commit 0c499ea60fda (send-pack: demultiplex a sideband stream with
status data, 2010-02-05) the send-pack builtin uses the side-band-64k
capability if advertised by the server.
Unfortunately this breaks pushing over the dump git protocol if used
over a network connection.
The detailed reasons for this breakage are (by courtesy of Jeff Preshing,
quoted from https://groups.google.com/d/msg/msysgit/at8D7J-h7mw/eaLujILGUWoJ):
MinGW wraps Windows sockets in CRT file descriptors in order to
mimic the functionality of POSIX sockets. This causes msvcrt.dll
to treat sockets as Installable File System (IFS) handles,
calling ReadFile, WriteFile, DuplicateHandle and CloseHandle on
them. This approach works well in simple cases on recent
versions of Windows, but does not support all usage patterns. In
particular, using this approach, any attempt to read & write
concurrently on the same socket (from one or more processes)
will deadlock in a scenario where the read waits for a response
from the server which is only invoked after the write. This is
what send_pack currently attempts to do in the use_sideband
codepath.
The new config option `sendpack.sideband` allows to override the
side-band-64k capability of the server, and thus makes the dumb git
protocol work.
Other transportation methods like ssh and http/https still benefit from
the sideband channel, therefore the default value of `sendpack.sideband`
is still true.
Signed-off-by: Thomas Braun <thomas.braun@byte-physics.de>
Signed-off-by: Oliver Schneider <oliver@assarbad.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The preceding two commits introduced special handling of the sideband
channel to neutralize ANSI escape sequences before sending the payload
to the terminal, and `sideband.allowControlCharacters` to override that
behavior.
However, some `pre-receive` hooks that are actively used in practice
want to color their messages and therefore rely on the fact that Git
passes them through to the terminal.
In contrast to other ANSI escape sequences, it is highly unlikely that
coloring sequences can be essential tools in attack vectors that mislead
Git users e.g. by hiding crucial information.
Therefore we can have both: Continue to allow ANSI coloring sequences to
be passed to the terminal, and neutralize all other ANSI escape
sequences.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The preceding commit fixed the vulnerability whereas sideband messages
(that are under the control of the remote server) could contain ANSI
escape sequences that would be sent to the terminal verbatim.
However, this fix may not be desirable under all circumstances, e.g.
when remote servers deliberately add coloring to their messages to
increase their urgency.
To help with those use cases, give users a way to opt-out of the
protections: `sideband.allowControlCharacters`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Update code paths that check data integrity around refs subsystem.
cf. <CAOLa=ZShPP3BPXa=YnC-vuX4zF=pUTFdUidZwOdna8bfVTNM9w@mail.gmail.com>
* ps/ref-consistency-checks:
builtin/fsck: drop `fsck_head_link()`
builtin/fsck: move generic HEAD check into `refs_fsck()`
builtin/fsck: move generic object ID checks into `refs_fsck()`
refs/reftable: introduce generic checks for refs
refs/reftable: fix consistency checks with worktrees
refs/reftable: extract function to retrieve backend for worktree
refs/reftable: adapt includes to become consistent
refs/files: introduce function to perform normal ref checks
refs/files: extract generic symref target checks
fsck: drop unused fields from `struct fsck_ref_report`
refs/files: perform consistency checks for root refs
refs/files: improve error handling when verifying symrefs
refs/files: extract function to check single ref
refs/files: remove useless indirection
refs/files: remove `refs_check_dir` parameter
refs/files: move fsck functions into global scope
refs/files: simplify iterating through root refs
Instead of testing if the macro name is ifn?def:: as if it were a inline
macro, it is faster and safer to just ignore such block macro lines before
hand.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rev-list options in our manuals are quite long; git-replay's manual
is no exception. Since replay doesn't use the formatting options at all
(it has its own output format), drop them.
This is the first time we have needed compound tests [1] for if[n]def in
our documentation:
git grep '^ifn\?def::' Documentation | grep '[,+]'
[1]: https://docs.asciidoctor.org/asciidoc/latest/directives/ifdef-ifndef/
For both ifdef and ifndef, the "," takes on the intuitive meaning:
- ifdef: if any of the listed attributes are set…
- ifndef: unless any of the listed attributes are set
(Use "+" for "all".)
Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git patch-id" documentation updates.
* kh/doc-patch-id:
doc: patch-id: --verbatim locks in --stable
doc: patch-id: spell out the git-diff-tree(1) form
doc: patch-id: use definite article for the result
patch-id: use “patch ID” throughout
doc: patch-id: capitalize Git version
doc: patch-id: don’t use semicolon between bullet points
Update a FAQ entry on synching two separate repositories using the
"git stash export/import" recently introduced.
* bc/doc-stash-import-export:
gitfaq: document using stash import/export to sync working tree
This reverts commit f406b8955295d01089ba2baf35eceadff2d11cae,
reversing changes made to 1627809eeff75e6ec936fc609e7be46d5eb2fa9e.
It seems to have caused a few regressions, two of the three known
ones we have proposed solutions for. Let's give ourselves a bit
more room to maneuver during the pre-release freeze period and
restart once the 2.53 ships.
The documentation claims that --get-urlmatch is replaced by
git config get --all --show-names --url=<URL> <name>
However, --url cannot be combined with --all, and this command
fails in practice.
Update the replacement to use only --url, which matches the
actual behavior of --get-urlmatch.
Signed-off-by: Pushkar Singh <pushkarkumarsingh1970@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the check that detects "HEAD" refs that do not point at a branch
into `refs_fsck()`. This follows the same motivation as the preceding
commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While most of the logic that verifies the consistency of refs is
driven by `refs_fsck()`, we still have a small handful of checks in
`fsck_head_link()`. These checks don't use the git-fsck(1) reporting
infrastructure, and as such it's impossible to for example disable
some of those checks.
One such check detects refs that point to the all-zeroes object ID.
Extract this check into the generic `refs_fsck_ref()` function that is
used by both the "files" and "reftable" backends.
Note that this will cause us to not return an error code from
`fsck_head_link()` anymore in case this error was detected. This is fine
though: the only caller of this function does not check the error code
anyway. To demonstrate this, adapt the function to drop its return value
altogether. The function will be removed in a subsequent commit anyway.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More doc style updates.
* ja/doc-synopsis-style-more:
doc: convert git-remote to synopsis style
doc: convert git stage to use synopsis block
doc: convert git-status tables to AsciiDoc format
doc: convert git-status to synopsis style
doc: fix t0450-txt-doc-vs-help to select only first synopsis block
Git 2.51 learned how to import and export stashes. This is a
secure and robust way to transfer working tree states across machines
and comes with almost none of the pitfalls of rsync or other tools.
Recommend this as an alternative in the FAQ.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Use _<placeholder>_ instead of <placeholder> in the description
- Use _underscores_ around math associated with <placeholders>
- Use `backticks` for keywords and more complex option
descriptions. The new rendering engine will apply synopsis rules to
these spans.
Signed-off-by: Michael Lyons <git@michael.lyo.nz>
Acked-by: Jean-Noël AVILA <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Use _<placeholder>_ instead of <placeholder> in the description
- Modify some samples to use <placeholders>
- Use `backticks` for keywords and more complex option
descriptions. The new rendering engine will apply synopsis rules to
these spans.
Signed-off-by: Michael Lyons <git@michael.lyo.nz>
Acked-by: Jean-Noël AVILA <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default `--unstable` is a legacy format that predates `--stable`.
That’s why 2871f4d4 (builtin: patch-id: add --verbatim as a command mode,
2022-10-24) made `--verbatim` lock in[1] `--stable`:
Users of --unstable mainly care about compatibility with old git
versions, which unstripping the whitespace would break. Thus there
isn't a usecase for the combination of --verbatim and --unstable,
and we don't expose this so as to not add maintainence burden.
† 1: imply `--stable`, disallow `--unstable`
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
