The Perl script backing `git add -p` is used not only for that command,
but also for `git stash -p`, `git reset -p` and `git checkout -p`.
In preparation for teaching the C version of `git add -p` to support
also the latter commands, let's abstract away what is "stage" specific
into a dedicated data structure describing the differences between the
patch modes.
As we prepare for calling the built-in `git add -p` in
`run_add_interactive()` via code paths that have not let `add_config()`
do its work, we have to make sure to re-parse the config using that
function in those cases.
Finally, please note that the Perl version tries to make sure that the
diffs are only generated for the modified files. This is not actually
necessary, as the calls to Git's diff machinery already perform that
work, and perform it well. This makes it unnecessary to port the
`FILTER` field of the `%patch_modes` struct, as well as the
`get_diff_reference()` function.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Just like `git add --edit` allows the user to edit the diff before it is
being applied to the index, this feature allows the user to edit the
diff *hunk*.
Naturally, it gets a bit more complicated here because the result has
to play well with the remaining hunks of the overall diff. Therefore,
we have to do a loop in which we let the user edit the hunk, then test
whether the result would work, and if not, drop the edits and let the
user decide whether to try editing the hunk again.
Note: in contrast to the Perl version, we use the same diff
"coalescing" (i.e. merging overlapping hunks into a single one) also for
the check after editing, and we introduce a new flag for that purpose
that asks the `reassemble_patch()` function to pretend that all hunks
were selected for use.
This allows us to continue to run `git apply` *without* the
`--allow-overlap` option (unlike the Perl version), and it also fixes
two known breakages in `t3701-add-interactive.sh` (which we cannot mark
as resolved so far because the Perl script version is still the default
and continues to have those breakages).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When skipping a hunk that adds a different number of lines than it
removes, we need to adjust the subsequent hunk headers of non-skipped
hunks: in pathological cases, the context is not enough to determine
precisely where the patch should be applied.
This problem was identified in 23fea4c240 (t3701: add failing test for
pathological context lines, 2018-03-01) and fixed in the Perl version in
fecc6f3a68 (add -p: adjust offsets of subsequent hunks when one is
skipped, 2018-03-01).
And this patch fixes it in the C version of `git add -p`.
In contrast to the Perl version, we try to keep the extra text on the
hunk header (which typically contains the signature of the function
whose code is changed in the hunk) intact.
Note: while the C version does not support staging mode changes at this
stage, we already prepare for this by simply skipping the hunk header if
both old and new offset is 0 (this cannot happen for regular hunks, and
we will use this as an indicator that we are looking at a special hunk).
Likewise, we already prepare for hunk splitting by handling the absence
of extra text in the hunk header gracefully: only the first split hunk
will have that text, the others will not (indicated by an empty extra
text start/end range). Preparing for hunk splitting already at this
stage avoids an indentation change of the entire hunk header-printing
block later, and is almost as easy to review as without that handling.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The code in `git-add--interactive.perl` that takes care of the `patch`
command can look quite intimidating. There are so many modes in which it
can be called, for example.
But for the `patch` command in `git add -i`, only one mode is relevant:
the `stage` mode. And we just implemented the beginnings of that mode in
C so far. So let's use it when `add.interactive.useBuiltin=true`.
Now, while the code in `add-patch.c` is far from reaching feature parity
with the code in `git-add--interactive.perl` (color is not implemented,
the diff algorithm cannot be configured, the colored diff cannot be
post-processed via `interactive.diffFilter`, many commands are
unimplemented yet, etc), hooking it all up with the part of `git add -i`
that is already converted to C makes it easier to test and develop it.
Note: at this stage, both the `add.interactive.useBuiltin` config
setting is still safely opt-in, and will probably be fore quite some
time, to allow for thorough testing "in the wild" without adversely
affecting existing users.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It is not only laziness that we simply spawn `git diff -p --cached`
here: this command needs to use the pager, and the pager needs to exit
when the diff is done. Currently we do not have any way to make that
happen if we run the diff in-process. So let's just spawn.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Well, it is not a full implementation yet. In the interest of making
this easy to review (and easy to keep bugs out), we still hand off to
the Perl script to do the actual work.
The `patch` functionality actually makes up for more than half of the
1,800+ lines of `git-add--interactive.perl`. It will be ported from Perl
to C incrementally, later.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is yet another command, ported to C. It builds nicely on the
support functions introduced for other commands, with the notable
difference that only names are displayed for untracked files, no
file type or diff summary.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is a relatively straight-forward port from the Perl version, with
the notable exception that we imitate `git reset -- <paths>` in the C
version rather than the convoluted `git ls-tree HEAD -- <paths> | git
update-index --index-info` followed by `git update-index --force-remove
-- <paths>` for the missed ones.
While at it, we fix the pretty obvious bug where the `revert` command
offers to unstage files that do not have staged changes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
After `status` and `help`, it is now turn to port the `update` command
to C, the second command that is shown in the main loop menu of `git add
-i`.
This `git add -i` command is the first one which lets the user choose a
subset of a list of files, and as such, this patch lays the groundwork
for the other commands of that category:
- It teaches the `print_file_item()` function to show a unique prefix
if we found any (the code to find it had been added already in the
previous patch where we colored the unique prefixes of the main loop
commands, but that patch uses the `print_command_item()` function to
display the menu items).
- This patch also adds the help text that is shown when the user input
to select items from the shown list could not be parsed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The `upgrade`, `revert` and `add-untracked` commands allow selecting
multiple entries. Let's extend the `list_and_choose()` function to
accommodate those use cases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In `update` command of `git add -i`, we are primarily interested in the
list of modified files that have worktree (i.e. unstaged) changes.
The Perl script version of `git add -i` has a parameter of the
`list_modified()` function for that matter. In C, we can be a lot more
precise, using an `enum`.
The C implementation of the filter also has an easier time to avoid
unnecessary work, simply by using an adaptive order of the `diff-index`
and `diff-files` calls, and then not adding unnecessary entries in the
first place.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This imitates the code to show the help text from the Perl script
`git-add--interactive.perl` in the built-in version.
To make sure that it renders exactly like the Perl version of `git add
-i`, we also add a test case for that to `t3701-add-interactive.sh`.
Signed-off-by: Slavica Djukic <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The error messages as well as the unique prefixes are colored in `git
add -i` by default; We need to do the same in the built-in version.
Signed-off-by: Slavica Djukic <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With this change, we print out the same colored help text that the
Perl-based `git add -i` prints in the main loop when question mark is
entered.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Just like in the Perl script `git-add--interactive.perl`, for each
command a unique prefix is determined (if there exists any within the
given parameters), and shown in the list, and accepted as a shortcut for
the command.
We use the prefix map implementation that we just added in the previous
commit for that purpose.
Signed-off-by: Slavica Djukic <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
The reason why we did not start with the main loop to begin with is that
it is the first user of `list_and_choose()`, which uses the `list()`
function that we conveniently introduced for use by the `status`
command.
Apart from the "and choose" part, there are more differences between the
way the `status` command calls the `list_and_choose()` function in the
Perl version of `git add -i` compared to the other callers of said
function. The most important ones:
- The list is not only shown, but the user is also asked to make a
choice, possibly selecting multiple entries.
- The list of items is prefixed with a marker indicating what items have
been selected, if multi-selection is allowed.
- Initially, for each item a unique prefix (if there exists any within
the given parameters) is determined, and shown in the list, and
accepted as a shortcut for the selection.
These features will be implemented later, except the part where the user
can choose a command. At this stage, though, the built-in `git add -i`
still only supports the `status` command, with the remaining commands to
follow over the course of the next commits.
In addition, we also modify `list()` to support displaying the commands
in columns, even if there is currently only one.
The Perl script `git-add--interactive.perl` mixed the purposes of the
"list" and the "and choose" part into the same function. In the C
version, we will keep them separate instead, calling the `list()`
function from the `list_and_choose()` function.
Note that we only have a prompt ending in a single ">" at this stage;
later commits will add commands that display a double ">>" to indicate
that the user is in a different loop than the main one.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
For simplicity, we only implemented the `status` command without colors.
This patch starts adding color, matching what the Perl script
`git-add--interactive.perl` does.
Original-Patch-By: Daniel Ferreira <bnmvco@gmail.com>
Signed-off-by: Slavica Djukic <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is what the Perl version does, and therefore it is what the
built-in version should do, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This implements the `status` command of `git add -i`. The data
structures introduced in this commit will be extended as needed later.
At this point, we re-implement only part of the `list_and_choose()`
function of the Perl script `git-add--interactive.perl` and call it
`list()`. It does not yet color anything, or do columns, or allow user
input.
Over the course of the next commits, we will introduce a
`list_and_choose()` function that uses `list()` to display the list of
options and let the user choose one or more of the displayed items. This
will be used to implement the main loop of the built-in `git add -i`, at
which point the new `status` command can actually be used.
Note that we pass the list of items as a `struct item **` as opposed to
a `struct item *`, to allow for the actual items to contain much more
information than merely the name.
Signed-off-by: Daniel Ferreira <bnmvco@gmail.com>
Signed-off-by: Slavica Djukic <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is hardly the first conversion of a Git command that is implemented
as a script to a built-in. So far, the most successful strategy for such
conversions has been to add a built-in helper and call that for more and
more functionality from the script, as more and more parts are
converted.
With the interactive add, we choose a different strategy. The sole
reason for this is that on Windows (where such a conversion has the most
benefits in terms of speed and robustness) we face the very specific
problem that a `system()` call in Perl seems to close `stdin` in the
parent process when the spawned process consumes even one character from
`stdin`. And that just does not work for us here, as it would stop the
main loop as soon as any interactive command was performed by the
helper. Which is almost all of the commands in `git add -i`.
It is almost as if Perl told us once again that it does not want us to
use it on Windows.
Instead, we follow the opposite route where we start with a bare-bones
version of the built-in interactive add, guarded by the new
`add.interactive.useBuiltin` config variable, and then add more and more
functionality to it, until it is feature complete.
At this point, the built-in version of `git add -i` only states that it
cannot do anything yet ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
