The first three commits are rebased versions of those in gitgitgadget/git#1215. These allow the following:
1. Fix `git config --global foo.bar <path>` from allowing the `<path>`. As a bonus, users with a config value starting with `/` will not get a warning about "old-style" paths needing a "`%(prefix)/`".
2. When in WSL, the path starts with `/` so it needs to be interpolated properly. Update the warning to include `%(prefix)/` to get the right value for WSL users. (This is specifically for using Git for Windows from Git Bash, but in a WSL directory.)
3. When using WSL, the ownership check fails and reports an error message. This is noisy, and happens even if the user has marked the path with `safe.directory`. Remove that error message.
This topic vendors in mimalloc v2.0.9, a fast allocator that allows Git
for Windows to perform efficiently.
Switch Git for Windows to using mimalloc instead of nedmalloc
This topic branch teaches `git clean` to respect NTFS junctions and Unix
bind mounts: it will now stop at those boundaries.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Newer compiler versions, like GCC 10 and Clang 12, have built-in
functions for bswap32 and bswap64. This comes in handy, for example,
when targeting CLANGARM64 on Windows, which would not be supported
without this logic.
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
From the documentation of said setting:
This boolean will enable fsync() when writing object files.
This is a total waste of time and effort on a filesystem that
orders data writes properly, but can be useful for filesystems
that do not use journalling (traditional UNIX filesystems) or
that only journal metadata and not file contents (OS X’s HFS+,
or Linux ext3 with "data=writeback").
The most common file system on Windows (NTFS) does not guarantee that
order, therefore a sudden loss of power (or any other event causing an
unclean shutdown) would cause corrupt files (i.e. files filled with
NULs). Therefore we need to change the default.
Note that the documentation makes it sound as if this causes really bad
performance. In reality, writing loose objects is something that is done
only rarely, and only a handful of files at a time.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Atomic append on windows is only supported on local disk files, and it may
cause errors in other situations, e.g. network file system. If that is the
case, this config option should be used to turn atomic append off.
Co-Authored-By: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: 孙卓识 <sunzhuoshi@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
NtQueryObject under Wine can return a success but fill out no name.
In those situations, Wine will set Buffer to NULL, and set result to
the sizeof(OBJECT_NAME_INFORMATION).
Running a command such as
echo "$(git.exe --version 2>/dev/null)"
will crash due to a NULL pointer dereference when the code attempts to
null terminate the buffer, although, weirdly, removing the subshell or
redirecting stdout to a file will not trigger the crash.
Code has been added to also check Buffer and Length to ensure the check
is as robust as possible due to the current behavior being fragile at
best, and could potentially change in the future
This code is based on the behavior of NtQueryObject under wine and
reactos.
Signed-off-by: Christopher Degawa <ccom@randomderp.com>
For Windows builds >= 15063 set $env:TERM to "xterm-256color" instead of
"cygwin" because they have a more capable console system that supports
this. Also set $env:COLORTERM="truecolor" if unset.
$env:TERM is initialized so that ANSI colors in color.c work, see
29a3963484 (Win32: patch Windows environment on startup, 2012-01-15).
See git-for-windows/git#3629 regarding problems caused by always setting
$env:TERM="cygwin".
This is the same heuristic used by the Cygwin runtime.
Signed-off-by: Rafael Kitover <rkitover@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In the case of Git for Windows (say, in a Git Bash window) running in a
Windows Subsystem for Linux (WSL) directory, the GetNamedSecurityInfoW()
call in is_path_owned_By_current_side() returns an error code other than
ERROR_SUCCESS. This is consistent behavior across this boundary.
In these cases, the owner would always be different because the WSL
owner is a different entity than the Windows user.
The change here is to suppress the error message that looks like this:
error: failed to get owner for '//wsl.localhost/...' (1)
Before this change, this warning happens for every Git command,
regardless of whether the directory is marked with safe.directory.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
We used to have that `make vcxproj` hack, but a hack it is. In the
meantime, we have a much cleaner solution: using CMake, either
explicitly, or even more conveniently via Visual Studio's built-in CMake
support (simply open Git's top-level directory via File>Open>Folder...).
Let's let the `README` reflect this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
As reported in https://github.com/newren/git-filter-repo/pull/225, it
looks like 99 bytes is not really sufficient to represent e.g. the full
path to Python when installed via Windows Store (and this path is used
in the hasb bang line when installing scripts via `pip`).
Let's increase it to what is probably the maximum sensible path size:
MAX_PATH. This makes `parse_interpreter()` in line with what
`lookup_prog()` handles.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Vilius Šumskas <vilius@sumskas.eu>
The vcpkg downloads may not succeed. Warn careful readers of the time out.
A simple retry will usually resolve the issue.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The vcpkg_install batch file depends on the availability of a
working Git on the CMD path. This may not be present if the user
has selected the 'bash only' option during Git-for-Windows install.
Detect and tell the user about their lack of a working Git in the CMD
window.
Fixes#2348.
A separate PR https://github.com/git-for-windows/build-extra/pull/258
now highlights the recommended path setting during install.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
In this context, a "feature" is a dependency combined with its own
dependencies.
Signed-off-by: Ian Bearman <ianb@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Move the default `-ENTRY` and `-SUBSYSTEM` arguments for
MSVC=1 builds from `config.mak.uname` into `clink.pl`.
These args are constant for console-mode executables.
Add support to `clink.pl` for generating a Win32 GUI application
using the `-mwindows` argument (to match how GCC does it). This
changes the `-ENTRY` and `-SUBSYSTEM` arguments accordingly.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Ignore the `-fno-stack-protector` compiler argument when building
with MSVC. This will be used in a later commit that needs to build
a Win32 GUI app.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Create a wrapper for the Windows Resource Compiler (RC.EXE)
for use by the MSVC=1 builds. This is similar to the CL.EXE
and LIB.EXE wrappers used for the MSVC=1 builds.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
When building with `make MSVC=1 DEBUG=1`, link to `libexpatd.lib`
rather than `libexpat.lib`.
It appears that the `vcpkg` package for "libexpat" has changed and now
creates `libexpatd.lib` for debug mode builds. Previously, both debug
and release builds created a ".lib" with the same basename.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Internally, Git expects the environment variable `HOME` to be set, and
to point to the current user's home directory.
This environment variable is not set by default on Windows, and
therefore Git tries its best to construct one if it finds `HOME` unset.
There are actually two different approaches Git tries: first, it looks
at `HOMEDRIVE`/`HOMEPATH` because this is widely used in corporate
environments with roaming profiles, and a user generally wants their
global Git settings to be in a roaming profile.
Only when `HOMEDRIVE`/`HOMEPATH` is either unset or does not point to a
valid location, Git will fall back to using `USERPROFILE` instead.
However, starting with Windows Vista, for secondary logons and services,
the environment variables `HOMEDRIVE`/`HOMEPATH` point to Windows'
system directory (usually `C:\Windows\system32`).
That is undesirable, and that location is usually write-protected anyway.
So let's verify that the `HOMEDRIVE`/`HOMEPATH` combo does not point to
Windows' system directory before using it, falling back to `USERPROFILE`
if it does.
This fixes git-for-windows#2709
Initial-Path-by: Ivan Pozdeev <vano@mail.mipt.ru>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
There is a Win32 API function to resolve symbolic links, and we can use
that instead of resolving them manually. Even better, this function also
resolves NTFS junction points (which are somewhat similar to bind
mounts).
This fixes https://github.com/git-for-windows/git/issues/2481.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Update clink.pl to link with either libcurl.lib or libcurl-d.lib
depending on whether DEBUG=1 is set.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows wants to add `git.exe` to the users' `PATH`, without
cluttering the latter with unnecessary executables such as `wish.exe`.
To that end, it invented the concept of its "Git wrapper", i.e. a tiny
executable located in `C:\Program Files\Git\cmd\git.exe` (originally a
CMD script) whose sole purpose is to set up a couple of environment
variables and then spawn the _actual_ `git.exe` (which nowadays lives in
`C:\Program Files\Git\mingw64\bin\git.exe` for 64-bit, and the obvious
equivalent for 32-bit installations).
Currently, the following environment variables are set unless already
initialized:
- `MSYSTEM`, to make sure that the MSYS2 Bash and the MSYS2 Perl
interpreter behave as expected, and
- `PLINK_PROTOCOL`, to force PuTTY's `plink.exe` to use the SSH
protocol instead of Telnet,
- `PATH`, to make sure that the `bin` folder in the user's home
directory, as well as the `/mingw64/bin` and the `/usr/bin`
directories are included. The trick here is that the `/mingw64/bin/`
and `/usr/bin/` directories are relative to the top-level installation
directory of Git for Windows (which the included Bash interprets as
`/`, i.e. as the MSYS pseudo root directory).
Using the absence of `MSYSTEM` as a tell-tale, we can detect in
`git.exe` whether these environment variables have been initialized
properly. Therefore we can call `C:\Program Files\Git\mingw64\bin\git`
in-place after this change, without having to call Git through the Git
wrapper.
Obviously, above-mentioned directories must be _prepended_ to the `PATH`
variable, otherwise we risk picking up executables from unrelated Git
installations. We do that by constructing the new `PATH` value from
scratch, appending `$HOME/bin` (if `HOME` is set), then the MSYS2 system
directories, and then appending the original `PATH`.
Side note: this modification of the `PATH` variable is independent of
the modification necessary to reach the executables and scripts in
`/mingw64/libexec/git-core/`, i.e. the `GIT_EXEC_PATH`. That
modification is still performed by Git, elsewhere, long after making the
changes described above.
While we _still_ cannot simply hard-link `mingw64\bin\git.exe` to `cmd`
(because the former depends on a couple of `.dll` files that are only in
`mingw64\bin`, i.e. calling `...\cmd\git.exe` would fail to load due to
missing dependencies), at least we can now avoid that extra process of
running the Git wrapper (which then has to wait for the spawned
`git.exe` to finish) by calling `...\mingw64\bin\git.exe` directly, via
its absolute path.
Testing this is in Git's test suite tricky: we set up a "new" MSYS
pseudo-root and copy the `git.exe` file into the appropriate location,
then verify that `MSYSTEM` is set properly, and also that the `PATH` is
modified so that scripts can be found in `$HOME/bin`, `/mingw64/bin/`
and `/usr/bin/`.
This addresses https://github.com/git-for-windows/git/issues/2283
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A change between versions 2.4.1 and 2.6.0 of the MSYS2 runtime modified
how Cygwin's runtime (and hence Git for Windows' MSYS2 runtime
derivative) handles locales: d16a56306d (Consolidate wctomb/mbtowc calls
for POSIX-1.2008, 2016-07-20).
An unintended side-effect is that "cold-calling" into the POSIX
emulation will start with a locale based on the current code page,
something that Git for Windows is very ill-prepared for, as it expects
to be able to pass a command-line containing non-ASCII characters to the
shell without having those characters munged.
One symptom of this behavior: when `git clone` or `git fetch` shell out
to call `git-upload-pack` with a path that contains non-ASCII
characters, the shell tried to interpret the entire command-line
(including command-line parameters) as executable path, which obviously
must fail.
This fixes https://github.com/git-for-windows/git/issues/1036
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In 1e64d18 (mingw: do resolve symlinks in `getcwd()`) a problem was
introduced that causes git for Windows to stop working with certain
mapped network drives (in particular, drives that are mapped to
locations with long path names). Error message was "fatal: Unable to
read current working directory: No such file or directory". Present
change fixes this issue as discussed in
https://github.com/git-for-windows/git/issues/2480
Signed-off-by: Bjoern Mueller <bjoernm@gmx.de>
As pointed out in https://github.com/git-for-windows/git/issues/1676,
the `git rev-parse --is-inside-work-tree` command currently fails when
the current directory's path contains symbolic links.
The underlying reason for this bug is that `getcwd()` is supposed to
resolve symbolic links, but our `mingw_getcwd()` implementation did not.
We do have all the building blocks for that, though: the
`GetFinalPathByHandleW()` function will resolve symbolic links. However,
we only called that function if `GetLongPathNameW()` failed, for
historical reasons: the latter function was supported for a long time,
but the former API function was introduced only with Windows Vista, and
we used to support also Windows XP. With that support having been
dropped, we are free to call the symbolic link-resolving function right
away.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The winsock2 library provides functions that work on different data
types than file descriptors, therefore we wrap them.
But that is not the only difference: they also do not set `errno` but
expect the callers to enquire about errors via `WSAGetLastError()`.
Let's translate that into appropriate `errno` values whenever the socket
operations fail so that Git's code base does not have to change its
expectations.
This closes https://github.com/git-for-windows/git/issues/2404
Helped-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Always use the internal "use_weak" random seed when initializing
the "mimalloc" heap when statically linked on Windows.
The imported "mimalloc" routines support several random sources
to seed the heap data structures, including BCrypt.dll and
RtlGenRandom. Crashes have been reported when using BCrypt.dll
if it initialized during an `atexit()` handler function. Granted,
such DLL initialization should not happen in an atexit handler,
but yet the crashes remain.
It should be noted that on Windows when statically linked, the
mimalloc startup code (called by the GCC CRT to initialize static
data prior to calling `main()`) always uses the internal "weak"
random seed. "mimalloc" does not try to load an alternate
random source until after the OS initialization has completed.
Heap data is stored in `__declspec(thread)` TLS data and in theory
each Git thread will have its own heap data. However, testing
shows that the "mimalloc" library doesn't actually call
`os_random_buf()` (to load a new random source) when creating these
new per-thread heap structures.
However, if an atexit handler is forced to run on a non-main
thread, the "mimalloc" library *WILL* try to create a new heap
and seed it with `os_random_buf()`. (The reason for this is still
a mystery to this author.) The `os_random_buf()` call can cause
the (previously uninitialized BCrypt.dll library) to be dynamically
loaded and a call made into it. Crashes have been reported in
v2.40.1.vfs.0.0 while in this call.
As a workaround, the fix here forces the use of the internal
"use_weak" random code for the subsequent `os_random_buf()` calls.
Since we have been using that random generator for the majority
of the program, it seems safe to use it for the final few mallocs
in the atexit handler (of which there really shouldn't be that many.
Signed-off-by: Jeff Hostetler <jeffhostetler@github.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We want to compile mimalloc's source code as part of Git, rather than
requiring the code to be built as an external library: mimalloc uses a
CMake-based build, which is not necessarily easy to integrate into the
flavors of Git for Windows (which will be the main benefitting port).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This commit imports mimalloc's source code as per v2.0.9, fetched from
the tag at https://github.com/microsoft/mimalloc.
The .c files are from the src/ subdirectory, and the .h files from the
include/ subdirectory. We will subsequently modify the source code to
accommodate building within Git's context.
Since we plan on using the `mi_*()` family of functions, we skip the
C++-specific source code, some POSIX compliant functions to interact
with mimalloc, and the code that wants to support auto-magic overriding
of the `malloc()` function (mimalloc-new-delete.h, alloc-posix.c,
mimalloc-override.h, alloc-override.c, alloc-override-osx.c,
alloc-override-win.c and static.c).
To appease the `check-whitespace` job of Git's Continuous Integration,
this commit was washed one time via `git rebase --whitespace=fix`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The mingw-w64 GCC seems to link implicitly to libwinpthread, which does
implement a pthread emulation (that is more complete than Git's). Let's
keep preferring Git's.
To avoid linker errors where it thinks that the `pthread_self` and the
`pthread_create` symbols are defined twice, let's give our version a
`win32_` prefix, just like we already do for `pthread_join()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Windows' equivalent to "bind mounts", NTFS junction points, can be
unlinked without affecting the mount target. This is clearly what users
expect to happen when they call `git clean -dfx` in a worktree that
contains NTFS junction points: the junction should be removed, and the
target directory of said junction should be left alone (unless it is
inside the worktree).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When specifying an absolute path without a drive prefix, we convert that
path internally. Let's make sure that we handle that case properly, too
;-)
This fixes the command
git clone https://github.com/git-for-windows/git \G4W
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
