Various typos, grammatical errors, and duplicated words in both
documentation and code comments have been corrected.
* wy/docs-typofixes:
docs: fix typos and grammar
The documentation for "--word-diff" has been extended with a bit of
implementation detail of where these different words come from.
* mm/doc-word-diff:
doc: clarify that --word-diff operates on line-level hunks
The `git log -L` implementation has been refactored to use the
standard diff output pipeline, enabling pickaxe and diff-filter to
work as expected. Additionally, metadata-only diff formats like
--raw and --name-only are now supported with -L.
* mm/line-log-cleanup:
line-log: allow non-patch diff formats with -L
line-log: integrate -L output with the standard log-tree pipeline
revision: move -L setup before output_format-to-diff derivation
Wording used in "format-patch --subject-prefix" documentation
has been improved.
* lo/doc-format-patch-subject-prefix:
Documentation: remove redundant 'instead' in --subject-prefix
"git rev-list" (and "git log" family of commands) learned a new "--max-count-oldest"
that picks oldest N commits in the range instead of the usual newest.
* mf/revision-max-count-oldest:
revision.c: implement --max-count-oldest
Documentation and tests have been added to clarify that Git's internal
raw timestamp format requires a `@` prefix for values less than
100,000,000 to prevent ambiguity with other formats like YYYYMMDD.
* ls/doc-raw-timestamp-prefix:
doc: document and test `@` prefix for raw timestamps
Guidelines on how to write a cover letter for a multi-patch series
have been added to SubmittingPatches, which also got a new marker
to separate the section for typofixes.
* jc/submitting-patches-cover-letter:
SubmittingPatches: describe cover letter
SubmittingPatches: separate typofixes section
The documentation for `push.default = simple` has been clarified to
better explain its behavior, making it clear that it pushes the
current branch to a same-named branch on the remote, and detailing
the upstream requirements for centralized workflows.
* ib/doc-push-default-simple:
doc: clarify push.default=simple behavior
"git push" learned to take a "remote group" name to push to, which
causes pushes to multiple places, just like "git fetch" would do.
* ua/push-remote-group:
push: support pushing to a remote group
remote: move remote group resolution to remote.c
remote: fix sign-compare warnings in push_cas_option
There are some typos in the documentation, comments, etc.
Fix them via codespell, and then adjust the "dump" files
used by the subversion tests to match the updated contents.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
[dscho noticed and fixed the problems in svn test]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
[jc did final assembling of the three patches]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A batch of documentation pages has been updated to use the modern
synopsis style.
* ja/doc-synopsis-style-again:
doc: convert git-imap-send synopsis and options to new style
doc: convert git-apply synopsis and options to new style
doc: convert git-am synopsis and options to new style
doc: convert git-grep synopsis and options to new style
doc: git bisect: clarify the usage of the synopsis vs actual command
doc: convert git-bisect to synopsis style
One file accidentally spelled GIT_ALTERNATE_OBJECT_DIRECTORIES with
REPOSITORIES instead of DIRECTORIES. Fix the typo.
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for --subject-prefix has two words "instead" in
the same sentence, making it a little bit confusing to read.
Change the order of the phrase to a more natural "Use [...]
instead of [...]" structure.
Signed-off-by: Lucas Seiki Oshiro <lucasseikioshiro@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix some typos and grammar errors in comments and documentation files.
Signed-off-by: Tuomas Ahola <taahol@utu.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for "--word-diff" has been extended with a bit of
implementation detail of where these different words come from.
* mm/doc-word-diff:
doc: clarify that --word-diff operates on line-level hunks
The `git log -L` implementation has been refactored to use the
standard diff output pipeline, enabling pickaxe and diff-filter to
work as expected. Additionally, metadata-only diff formats like
--raw and --name-only are now supported with -L.
* mm/line-log-cleanup:
line-log: allow non-patch diff formats with -L
line-log: integrate -L output with the standard log-tree pipeline
revision: move -L setup before output_format-to-diff derivation
"--max-count" is a commit limiting option and sets a maximum amount
of commits to be shown. If a user wants to see only the first N
commits of the history (the oldest commits) they'd have to do
something like
git log $(git rev-list HEAD | tail -n N | head -n 1)
This is not very user-friendly.
Teach get_revision() the --max-count-oldest option.
Signed-off-by: Mirko Faina <mroik@delayed.space>
[jc: fixed up t4202 <xmqq7boy4o05.fsf@gitster.g>]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We talk about how a commit log message should look like, but do not
give advice on writing the cover letter to sell a series to the
widest possible audience.
Helped-by: Patrick Steinhardt <ps@pks.im>
Helped-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing text said something about tests (with [[tests]] to make
it easier to refer to it from elsewhere) and then flowed into a
different topic of typofixes, but it was unclear where the latter
started. Add a similar [[typofixes]] marker to the document.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git internal date format `<unix-timestamp> <time-zone-offset>`
fails to parse when the timestamp is less than 100,000,000 (fewer than
9 digits). This happens to avoid potential ambiguity with other date
formats such as `YYYYMMDD`, especially when used with approxidate.
To force the parser to interpret the value as a raw timestamp, it must
be prefixed with `@` (e.g., `@0 +0000`). This behavior was introduced
in 2c733fb24c (parse_date(): '@' prefix
forces git-timestamp, 2012-02-02) but was never documented.
Document the `@` prefix in `Documentation/date-formats.adoc` to make
this behavior explicit. Also add test cases to `t/t0006-date.sh` to
verify and demonstrate the difference between prefixed and unprefixed
small timestamps (e.g., `@2000` vs `2000`).
Signed-off-by: Luna Schwalbe <dev@luna.gl>
Co-authored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for `push.default = simple` has been clarified to
better explain its behavior, making it clear that it pushes the
current branch to a same-named branch on the remote, and detailing
the upstream requirements for centralized workflows.
* ib/doc-push-default-simple:
doc: clarify push.default=simple behavior
"git push" learned to take a "remote group" name to push to, which
causes pushes to multiple places, just like "git fetch" would do.
* ua/push-remote-group:
push: support pushing to a remote group
remote: move remote group resolution to remote.c
remote: fix sign-compare warnings in push_cas_option
The "git pack-objects --path-walk" traversal has been integrated
with several object filters, including blobless and sparse filters.
* ds/path-walk-filters:
path-walk: support `combine` filter
path-walk: support `object:type` filter
path-walk: support `tree:0` filter
t6601: tag otherwise-unreachable trees
pack-objects: support sparse:oid filter with path-walk
path-walk: add pl_sparse_trees to control tree pruning
path-walk: support blob size limit filter
backfill: die on incompatible filter options
path-walk: support blobless filter
path-walk: always emit directly-requested objects
t/perf: add pack-objects filter and path-walk benchmark
pack-objects: pass --objects with --path-walk
t5620: make test work with path-walk var
"Friday noon" asked in the morning on Sunday was parsed to be one
day before the specified time, which has been corrected.
* ta/approxidate-noon-fix:
approxidate: use deferred mday adjustments for "specials"
approxidate: make "specials" respect fixed day-of-month
t0006: add support for approxidate test date adjustment
approxidate: make "today" wrap to midnight
A batch of documentation pages has been updated to use the modern
synopsis style.
* ja/doc-synopsis-style-again:
doc: convert git-imap-send synopsis and options to new style
doc: convert git-apply synopsis and options to new style
doc: convert git-am synopsis and options to new style
doc: convert git-grep synopsis and options to new style
doc: git bisect: clarify the usage of the synopsis vs actual command
doc: convert git-bisect to synopsis style
"git cat-file --batch" learns an in-line command "mailmap"
that lets the user toggle use of mailmap.
* sa/cat-file-batch-mailmap-switch:
cat-file: add mailmap subcommand to --batch-command
The fsmonitor daemon has been implemented for Linux.
* pt/fsmonitor-linux:
fsmonitor: convert shown khash to strset in do_handle_client
fsmonitor: add tests for Linux
fsmonitor: add timeout to daemon stop command
fsmonitor: close inherited file descriptors and detach in daemon
run-command: add close_fd_above_stderr option
fsmonitor: implement filesystem change listener for Linux
fsmonitor: rename fsm-settings-darwin.c to fsm-settings-unix.c
fsmonitor: rename fsm-ipc-darwin.c to fsm-ipc-unix.c
fsmonitor: use pthread_cond_timedwait for cookie wait
compat/win32: add pthread_cond_timedwait
fsmonitor: fix hashmap memory leak in fsmonitor_run_daemon
fsmonitor: fix khash memory leak in do_handle_client
t9210, t9211: disable GIT_TEST_SPLIT_INDEX for scalar clone tests
The graph output from commands like "git log --graph" can now be
limited to a specified number of lanes, preventing overly wide output
in repositories with many branches.
* ps/graph-lane-limit:
graph: add truncation mark to capped lanes
graph: add --graph-lane-limit option
graph: limit the graph width to a hard-coded max
Fix several spelling mistakes, subject-verb agreement issues, and
duplicated words.
Signed-off-by: Weijie Yuan <wy@wyuan.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that -L flows through log_tree_diff_flush() and diff_flush(),
metadata-only diff formats work because they only read filepair
fields (status, mode, path, oid) already set on the pre-computed
pairs.
Expand the allowlist in setup_revisions() to also accept --raw,
--name-only, --name-status, and --summary. Diff stat formats
(--stat, --numstat, --shortstat, --dirstat) remain blocked because
they call compute_diffstat() on full blob content and would show
whole-file statistics rather than range-scoped ones.
Signed-off-by: Michael Montalbo <mmontalbo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --word-diff documentation describes the output modes and
word-regex mechanics but does not explain that word-diff operates
within the hunks produced by the line-level diff rather than
performing an independent word-stream comparison. This can
surprise users when the line-level alignment causes word-level
changes to appear even though the words in both files are
identical.
Add an implementation note explaining the two-stage relationship
and that the output may change if Git acquires a different
implementation in the future.
Signed-off-by: Michael Montalbo <mmontalbo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
