The first three commits are rebased versions of those in gitgitgadget/git#1215. These allow the following:
1. Fix `git config --global foo.bar <path>` from allowing the `<path>`. As a bonus, users with a config value starting with `/` will not get a warning about "old-style" paths needing a "`%(prefix)/`".
2. When in WSL, the path starts with `/` so it needs to be interpolated properly. Update the warning to include `%(prefix)/` to get the right value for WSL users. (This is specifically for using Git for Windows from Git Bash, but in a WSL directory.)
3. When using WSL, the ownership check fails and reports an error message. This is noisy, and happens even if the user has marked the path with `safe.directory`. Remove that error message.
After releasing v2.2.6, they followed up really quickly with a v2.2.7,
which indicates some urgency in taking this update. The diff of this PR
is pretty informative, too.
This closes https://github.com/git-for-windows/git/issues/6046
Internally, Git expects the environment variable `HOME` to be set, and
to point to the current user's home directory.
This environment variable is not set by default on Windows, and
therefore Git tries its best to construct one if it finds `HOME` unset.
There are actually two different approaches Git tries: first, it looks
at `HOMEDRIVE`/`HOMEPATH` because this is widely used in corporate
environments with roaming profiles, and a user generally wants their
global Git settings to be in a roaming profile.
Only when `HOMEDRIVE`/`HOMEPATH` is either unset or does not point to a
valid location, Git will fall back to using `USERPROFILE` instead.
However, starting with Windows Vista, for secondary logons and services,
the environment variables `HOMEDRIVE`/`HOMEPATH` point to Windows'
system directory (usually `C:\Windows\system32`).
That is undesirable, and that location is usually write-protected anyway.
So let's verify that the `HOMEDRIVE`/`HOMEPATH` combo does not point to
Windows' system directory before using it, falling back to `USERPROFILE`
if it does.
This fixes git-for-windows#2709
Initial-Path-by: Ivan Pozdeev <vano@mail.mipt.ru>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows wants to add `git.exe` to the users' `PATH`, without
cluttering the latter with unnecessary executables such as `wish.exe`.
To that end, it invented the concept of its "Git wrapper", i.e. a tiny
executable located in `C:\Program Files\Git\cmd\git.exe` (originally a
CMD script) whose sole purpose is to set up a couple of environment
variables and then spawn the _actual_ `git.exe` (which nowadays lives in
`C:\Program Files\Git\mingw64\bin\git.exe` for 64-bit, and the obvious
equivalent for 32-bit installations).
Currently, the following environment variables are set unless already
initialized:
- `MSYSTEM`, to make sure that the MSYS2 Bash and the MSYS2 Perl
interpreter behave as expected, and
- `PLINK_PROTOCOL`, to force PuTTY's `plink.exe` to use the SSH
protocol instead of Telnet,
- `PATH`, to make sure that the `bin` folder in the user's home
directory, as well as the `/mingw64/bin` and the `/usr/bin`
directories are included. The trick here is that the `/mingw64/bin/`
and `/usr/bin/` directories are relative to the top-level installation
directory of Git for Windows (which the included Bash interprets as
`/`, i.e. as the MSYS pseudo root directory).
Using the absence of `MSYSTEM` as a tell-tale, we can detect in
`git.exe` whether these environment variables have been initialized
properly. Therefore we can call `C:\Program Files\Git\mingw64\bin\git`
in-place after this change, without having to call Git through the Git
wrapper.
Obviously, above-mentioned directories must be _prepended_ to the `PATH`
variable, otherwise we risk picking up executables from unrelated Git
installations. We do that by constructing the new `PATH` value from
scratch, appending `$HOME/bin` (if `HOME` is set), then the MSYS2 system
directories, and then appending the original `PATH`.
Side note: this modification of the `PATH` variable is independent of
the modification necessary to reach the executables and scripts in
`/mingw64/libexec/git-core/`, i.e. the `GIT_EXEC_PATH`. That
modification is still performed by Git, elsewhere, long after making the
changes described above.
While we _still_ cannot simply hard-link `mingw64\bin\git.exe` to `cmd`
(because the former depends on a couple of `.dll` files that are only in
`mingw64\bin`, i.e. calling `...\cmd\git.exe` would fail to load due to
missing dependencies), at least we can now avoid that extra process of
running the Git wrapper (which then has to wait for the spawned
`git.exe` to finish) by calling `...\mingw64\bin\git.exe` directly, via
its absolute path.
Testing this is in Git's test suite tricky: we set up a "new" MSYS
pseudo-root and copy the `git.exe` file into the appropriate location,
then verify that `MSYSTEM` is set properly, and also that the `PATH` is
modified so that scripts can be found in `$HOME/bin`, `/mingw64/bin/`
and `/usr/bin/`.
This addresses https://github.com/git-for-windows/git/issues/2283
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A change between versions 2.4.1 and 2.6.0 of the MSYS2 runtime modified
how Cygwin's runtime (and hence Git for Windows' MSYS2 runtime
derivative) handles locales: d16a56306d (Consolidate wctomb/mbtowc calls
for POSIX-1.2008, 2016-07-20).
An unintended side-effect is that "cold-calling" into the POSIX
emulation will start with a locale based on the current code page,
something that Git for Windows is very ill-prepared for, as it expects
to be able to pass a command-line containing non-ASCII characters to the
shell without having those characters munged.
One symptom of this behavior: when `git clone` or `git fetch` shell out
to call `git-upload-pack` with a path that contains non-ASCII
characters, the shell tried to interpret the entire command-line
(including command-line parameters) as executable path, which obviously
must fail.
This fixes https://github.com/git-for-windows/git/issues/1036
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
From the documentation of said setting:
This boolean will enable fsync() when writing object files.
This is a total waste of time and effort on a filesystem that
orders data writes properly, but can be useful for filesystems
that do not use journalling (traditional UNIX filesystems) or
that only journal metadata and not file contents (OS X’s HFS+,
or Linux ext3 with "data=writeback").
The most common file system on Windows (NTFS) does not guarantee that
order, therefore a sudden loss of power (or any other event causing an
unclean shutdown) would cause corrupt files (i.e. files filled with
NULs). Therefore we need to change the default.
Note that the documentation makes it sound as if this causes really bad
performance. In reality, writing loose objects is something that is done
only rarely, and only a handful of files at a time.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Atomic append on windows is only supported on local disk files, and it may
cause errors in other situations, e.g. network file system. If that is the
case, this config option should be used to turn atomic append off.
Co-Authored-By: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: 孙卓识 <sunzhuoshi@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
NtQueryObject under Wine can return a success but fill out no name.
In those situations, Wine will set Buffer to NULL, and set result to
the sizeof(OBJECT_NAME_INFORMATION).
Running a command such as
echo "$(git.exe --version 2>/dev/null)"
will crash due to a NULL pointer dereference when the code attempts to
null terminate the buffer, although, weirdly, removing the subshell or
redirecting stdout to a file will not trigger the crash.
Code has been added to also check Buffer and Length to ensure the check
is as robust as possible due to the current behavior being fragile at
best, and could potentially change in the future
This code is based on the behavior of NtQueryObject under wine and
reactos.
Signed-off-by: Christopher Degawa <ccom@randomderp.com>
For Windows builds >= 15063 set $env:TERM to "xterm-256color" instead of
"cygwin" because they have a more capable console system that supports
this. Also set $env:COLORTERM="truecolor" if unset.
$env:TERM is initialized so that ANSI colors in color.c work, see
29a3963484 (Win32: patch Windows environment on startup, 2012-01-15).
See git-for-windows/git#3629 regarding problems caused by always setting
$env:TERM="cygwin".
This is the same heuristic used by the Cygwin runtime.
Signed-off-by: Rafael Kitover <rkitover@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In the case of Git for Windows (say, in a Git Bash window) running in a
Windows Subsystem for Linux (WSL) directory, the GetNamedSecurityInfoW()
call in is_path_owned_By_current_side() returns an error code other than
ERROR_SUCCESS. This is consistent behavior across this boundary.
In these cases, the owner would always be different because the WSL
owner is a different entity than the Windows user.
The change here is to suppress the error message that looks like this:
error: failed to get owner for '//wsl.localhost/...' (1)
Before this change, this warning happens for every Git command,
regardless of whether the directory is marked with safe.directory.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
We used to have that `make vcxproj` hack, but a hack it is. In the
meantime, we have a much cleaner solution: using CMake, either
explicitly, or even more conveniently via Visual Studio's built-in CMake
support (simply open Git's top-level directory via File>Open>Folder...).
Let's let the `README` reflect this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
As reported in https://github.com/newren/git-filter-repo/pull/225, it
looks like 99 bytes is not really sufficient to represent e.g. the full
path to Python when installed via Windows Store (and this path is used
in the hasb bang line when installing scripts via `pip`).
Let's increase it to what is probably the maximum sensible path size:
MAX_PATH. This makes `parse_interpreter()` in line with what
`lookup_prog()` handles.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Vilius Šumskas <vilius@sumskas.eu>
In this context, a "feature" is a dependency combined with its own
dependencies.
Signed-off-by: Ian Bearman <ianb@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The vcpkg downloads may not succeed. Warn careful readers of the time out.
A simple retry will usually resolve the issue.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
There is a Win32 API function to resolve symbolic links, and we can use
that instead of resolving them manually. Even better, this function also
resolves NTFS junction points (which are somewhat similar to bind
mounts).
This fixes https://github.com/git-for-windows/git/issues/2481.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The vcpkg_install batch file depends on the availability of a
working Git on the CMD path. This may not be present if the user
has selected the 'bash only' option during Git-for-Windows install.
Detect and tell the user about their lack of a working Git in the CMD
window.
Fixes#2348.
A separate PR https://github.com/git-for-windows/build-extra/pull/258
now highlights the recommended path setting during install.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Update clink.pl to link with either libcurl.lib or libcurl-d.lib
depending on whether DEBUG=1 is set.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In 1e64d18 (mingw: do resolve symlinks in `getcwd()`) a problem was
introduced that causes git for Windows to stop working with certain
mapped network drives (in particular, drives that are mapped to
locations with long path names). Error message was "fatal: Unable to
read current working directory: No such file or directory". Present
change fixes this issue as discussed in
https://github.com/git-for-windows/git/issues/2480
Signed-off-by: Bjoern Mueller <bjoernm@gmx.de>
Windows' equivalent to "bind mounts", NTFS junction points, can be
unlinked without affecting the mount target. This is clearly what users
expect to happen when they call `git clean -dfx` in a worktree that
contains NTFS junction points: the junction should be removed, and the
target directory of said junction should be left alone (unless it is
inside the worktree).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
By defining `USE_MIMALLOC`, Git can now be compiled with that
nicely-fast and small allocator.
Note that we have to disable a couple `DEVELOPER` options to build
mimalloc's source code, as it makes heavy use of declarations after
statements, among other things that disagree with Git's conventions.
We even have to silence some GCC warnings in non-DEVELOPER mode. For
example, the `-Wno-array-bounds` flag is needed because in `-O2` builds,
trying to call `NtCurrentTeb()` (which `_mi_thread_id()` does on
Windows) causes the bogus warning about a system header, likely related
to https://sourceforge.net/p/mingw-w64/mailman/message/37674519/ and to
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578:
C:/git-sdk-64-minimal/mingw64/include/psdk_inc/intrin-impl.h:838:1:
error: array subscript 0 is outside array bounds of 'long long unsigned int[0]' [-Werror=array-bounds]
838 | __buildreadseg(__readgsqword, unsigned __int64, "gs", "q")
| ^~~~~~~~~~~~~~
Also: The `mimalloc` library uses C11-style atomics, therefore we must
require that standard when compiling with GCC if we want to use
`mimalloc` (instead of requiring "only" C99). This is what we do in the
CMake definition already, therefore this commit does not need to touch
`contrib/buildsystems/`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It seems to be not exactly rare on Windows to install NTFS junction
points (the equivalent of "bind mounts" on Linux/Unix) in worktrees,
e.g. to map some development tools into a subdirectory.
In such a scenario, it is pretty horrible if `git clean -dfx` traverses
into the mapped directory and starts to "clean up".
Let's just not do that. Let's make sure before we traverse into a
directory that it is not a mount point (or junction).
This addresses https://github.com/git-for-windows/git/issues/607
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We want to compile mimalloc's source code as part of Git, rather than
requiring the code to be built as an external library: mimalloc uses a
CMake-based build, which is not necessarily easy to integrate into the
flavors of Git for Windows (which will be the main benefitting port).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Matthias Aßhauer <mha1993@live.de>
We are about to vendor in `mimalloc`'s source code which we will want to
include `compat/posix.h` after defining that constant.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When asking the mingw-w64 variant of GCC to compile C11 code, it seems
to link implicitly to libwinpthread, which does implement a pthread
emulation (that is more complete than Git's).
In preparation for vendoring in mimalloc (which requires C11 support),
let's keep preferring Git's own pthread emulation.
To avoid linker errors where it thinks that the `pthread_self` and the
`pthread_create` symbols are defined twice, let's give our version a
`win32_` prefix, just like we already do for `pthread_join()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Recently some GitHub CI jobs were broken by update on the platform
side, which was eventually resolved by image rollback, but in the
meantime Dscho invented a workaround patch to sidestep the broken
part of the platform. Their future image update may contain the
same bug, in which case the workaround may again become needed.
As we do not want to be building with workaround that avoids system
regexp library altogether unless the system is known to be broken,
so short of an automated "detect broken system and apply workaround"
mechanism, let's use the folks who are compiling the code to detect
breakage on their system and cope with the breakage ;-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce system overhead "git upload-pack" spends on relaying "git
pack-objects" output to the "git fetch" running on the other end of
the connection.
* ps/upload-pack-buffer-more-writes:
builtin/pack-objects: reduce lock contention when writing packfile data
csum-file: drop `hashfd_throughput()`
csum-file: introduce `hashfd_ext()`
sideband: use writev(3p) to send pktlines
wrapper: introduce writev(3p) wrappers
compat/posix: introduce writev(3p) wrapper
upload-pack: reduce lock contention when writing packfile data
upload-pack: prefer flushing data over sending keepalive
upload-pack: adapt keepalives based on buffering
upload-pack: fix debug statement when flushing packfile data
Add process ancestry data to trace2 on macOS to match what we
already do on Linux and Windows. Also adjust the way Windows
implementation reports this information to match the other two.
* mc/tr2-process-ancestry-cleanup:
t0213: add trace2 cmd_ancestry tests
test-tool: extend trace2 helper with 400ancestry
trace2: emit cmd_ancestry data for Windows
trace2: refactor Windows process ancestry trace2 event
build: include procinfo.c impl for macOS
trace2: add macOS process ancestry tracing
Allow recording process ID of the process that holds the lock next
to a lockfile for diagnosis.
* pc/lockfile-pid:
lockfile: add PID file for debugging stale locks
Since 2f732bf15e (tr2: log parent process name, 2021-07-21) it is now
now possible to emit a specific process ancestry event in TRACE2. We
should emit the Windows process ancestry data with the correct event
type.
To not break existing consumers of the data_json "windows/ancestry"
event, we continue to emit the ancestry data as a JSON event.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 353d3d77f4 (trace2: collect Windows-specific process information,
2019-02-22) we added process ancestry information for Windows to TRACE2
via a data_json event. It was only later in 2f732bf15e (tr2: log parent
process name, 2021-07-21) that the specific cmd_ancestry event was
added to TRACE2.
In a future commit we will emit the ancestry information with the newer
cmd_ancestry TRACE2 event. Right now, we rework this implementation of
trace2_collect_process_info to separate the calculation of ancestors
from building and emiting the JSON array via a data_json event.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 353d3d77f4 (trace2: collect Windows-specific process information,
2019-02-22) Windows-specific process ancestry information was added as
a data_json event to TRACE2. Furthermore in 2f732bf15e (tr2: log
parent process name, 2021-07-21) similar functionality was added for
Linux-based systems, using procfs.
Teach Git to also log process ancestry on macOS using the sysctl with
KERN_PROC to get process information (PPID and process name).
Like the Linux implementation, we use the cmd_ancestry TRACE2 event
rather than using a data_json event and creating another custom data
point.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Upstream symbolic link support on Windows from Git-for-Windows.
* js/symlink-windows:
mingw: special-case index entries for symlinks with buggy size
mingw: emulate `stat()` a little more faithfully
mingw: try to create symlinks without elevated permissions
mingw: add support for symlinks to directories
mingw: implement basic `symlink()` functionality (file symlinks only)
mingw: implement `readlink()`
mingw: allow `mingw_chdir()` to change to symlink-resolved directories
mingw: support renaming symlinks
mingw: handle symlinks to directories in `mingw_unlink()`
mingw: add symlink-specific error codes
mingw: change default of `core.symlinks` to false
mingw: factor out the retry logic
mingw: compute the correct size for symlinks in `mingw_lstat()`
mingw: teach dirent about symlinks
mingw: let `mingw_lstat()` error early upon problems with reparse points
mingw: drop the separate `do_lstat()` function
mingw: implement `stat()` with symlink support
mingw: don't call `GetFileAttributes()` twice in `mingw_lstat()`
When a lock file is held, it can be helpful to know which process owns
it, especially when debugging stale locks left behind by crashed
processes. Add an optional feature that creates a companion PID file
alongside each lock file, containing the PID of the lock holder.
For a lock file "foo.lock", the PID file is named "foo~pid.lock". The
tilde character is forbidden in refnames and allowed in Windows
filenames, which guarantees no collision with the refs namespace
(e.g., refs "foo" and "foo~pid" cannot both exist). The file contains
a single line in the format "pid <value>" followed by a newline.
The PID file is created when a lock is acquired (if enabled), and
automatically cleaned up when the lock is released (via commit or
rollback). The file is registered as a tempfile so it gets cleaned up
by signal and atexit handlers if the process terminates abnormally.
When a lock conflict occurs, the code checks for an existing PID file
and, if found, uses kill(pid, 0) to determine if the process is still
running. This allows providing context-aware error messages:
Lock is held by process 12345. Wait for it to finish, or remove
the lock file to continue.
Or for a stale lock:
Lock was held by process 12345, which is no longer running.
Remove the stale lock file to continue.
The feature is controlled via core.lockfilePid configuration (boolean).
Defaults to false. When enabled, PID files are created for all lock
operations.
Existing PID files are always read when displaying lock errors,
regardless of the core.lockfilePid setting. This ensures helpful
diagnostics even when the feature was previously enabled and later
disabled.
Signed-off-by: Paulo Casaretto <pcasaretto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further preparation to upstream symbolic link support on Windows.
* js/prep-symlink-windows:
trim_last_path_component(): avoid hard-coding the directory separator
strbuf_readlink(): support link targets that exceed 2*PATH_MAX
strbuf_readlink(): avoid calling `readlink()` twice in corner-cases
init: do parse _all_ core.* settings early
mingw: do resolve symlinks in `getcwd()`
