Checking the work tree status is quite slow on Windows, due to slow
`lstat()` emulation (git calls `lstat()` once for each file in the
index). Windows operating system APIs seem to be much better at scanning
the status of entire directories than checking single files.
Add an `lstat()` implementation that uses a cache for lstat data. Cache
misses read the entire parent directory and add it to the cache.
Subsequent `lstat()` calls for the same directory are served directly
from the cache.
Also implement `opendir()`/`readdir()`/`closedir()` so that they create
and use directory listings in the cache.
The cache doesn't track file system changes and doesn't plug into any
modifying file APIs, so it has to be explicitly enabled for git functions
that don't modify the working copy.
Note: in an earlier version of this patch, the cache was always active and
tracked file system changes via ReadDirectoryChangesW. However, this was
much more complex and had negative impact on the performance of modifying
git commands such as 'git checkout'.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Ensure key CMake option values are part of the CMake output to
facilitate user support when tool updates impact the wider CMake
actions, particularly ongoing 'improvements' in Visual Studio.
These CMake displays perform the same function as the build-options.txt
provided in the main Git for Windows. CMake is already chatty.
The setting of CMAKE_EXPORT_COMPILE_COMMANDS is also reported.
Include the environment's CMAKE_EXPORT_COMPILE_COMMANDS value which
may have been propogated to CMake's internal value.
Testing the CMAKE_EXPORT_COMPILE_COMMANDS processing can be difficult
in the Visual Studio environment, as it may be cached in many places.
The 'environment' may include the OS, the user shell, CMake's
own environment, along with the Visual Studio presets and caches.
See previous commit for arefacts that need removing for a clean test.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
In Git-for-Windows, work on using ARM64 has progressed. The
commit 2d94b77b27 (cmake: allow building for Windows/ARM64, 2020-12-04)
failed to notice that /compat/vcbuild/vcpkg_install.bat will default to
using the "x64-windows" architecture for the vcpkg installation if not set,
but CMake is not told of this default. Commit 635b6d99b3 (vcbuild: install
ARM64 dependencies when building ARM64 binaries, 2020-01-31) later updated
vcpkg_install.bat to accept an arch (%1) parameter, but retained the default.
This default is neccessary for the use case where the project directory is
opened directly in Visual Studio, which will find and build a CMakeLists.txt
file without any parameters, thus expecting use of the default setting.
Also Visual studio will generate internal .sln solution and .vcxproj project
files needed for some extension tools. Inform users of the additional
.sln/.vcxproj generation.
** How to test:
rm -rf '.vs' # remove old visual studio settings
rm -rf 'compat/vcbuild/vcpkg' # remove any vcpkg downloads
rm -rf 'contrib/buildsystems/out' # remove builds & CMake artifacts
with a fresh Visual Studio Community Edition, File>>Open>>(git *folder*)
to load the project (which will take some time!).
check for successful compilation.
The implicit .sln (etc.) are in the hidden .vs directory created by
Visual Studio.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
The intention of this change is to align with how the top-level git
`Makefile` defines its own test target (which also internally calls
`$(MAKE) -C t/ all`). This change also ensures the consistency of
`make -C contrib/subtree test` with other testing in CI executions
(which rely on `$DEFAULT_TEST_TARGET` being defined as `prove`).
Signed-off-by: Victoria Dye <vdye@github.com>
Create another thread to watch over the daemon process and
automatically shut it down if necessary.
This commit creates the basic framework for a "health" thread
to monitor the daemon and/or the file system. Later commits
will add platform-specific code to do the actual work.
The "health" thread is intended to monitor conditions that
would be difficult to track inside the IPC thread pool and/or
the file system listener threads. For example, when there are
file system events outside of the watched worktree root or if
we want to have an idle-timeout auto-shutdown feature.
This commit creates the health thread itself, defines the thread-proc
and sets up the thread's event loop. It integrates this new thread
into the existing IPC and Listener thread models.
This commit defines the API to the platform-specific code where all of
the monitoring will actually happen.
The platform-specific code for MacOS is just stubs. Meaning that the
health thread will immediately exit on MacOS, but that is OK and
expected. Future work can define MacOS-specific monitoring.
The platform-specific code for Windows sets up enough of the
WaitForMultipleObjects() machinery to watch for system and/or custom
events. Currently, the set of wait handles only includes our custom
shutdown event (sent from our other theads). Later commits in this
series will extend the set of wait handles to monitor other
conditions.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Git's regular Makefile mentions that HOST_CPU should be defined when cross-compiling Git: 37796bca76/Makefile (L438-L439)
This is then used to set the GIT_HOST_CPU variable when compiling Git: 37796bca76/Makefile (L1337-L1341)
Then, when the user runs `git version --build-options`, it returns that value: 37796bca76/help.c (L658)
This commit adds the same functionality to the CMake configuration. Users can now set -DHOST_CPU= to set the target architecture.
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Extend generic incompatibility checkout with platform-specific
mechanism. Stub in Win32 version.
In the existing fsmonitor-settings code we have a way to mark
types of repos as incompatible with fsmonitor (whether via the
hook and IPC APIs). For example, we do this for bare repos,
since there are no files to watch.
Extend this exclusion mechanism for platform-specific reasons.
This commit just creates the framework and adds a stub for Win32.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
On Windows, there are two kinds of executables, console ones and
non-console ones. Git's executables are all console ones.
When launching the former e.g. in a scheduled task, a CMD window pops
up. This is not what we want for the tasks installed via the `git
maintenance` command.
To work around this, let's introduce `headless-git.exe`, which is a
non-console program that does _not_ pop up any window. All it does is to
re-launch `git.exe`, suppressing that console window, passing through
all command-line arguments as-are.
Helped-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Helped-by: Yuyi Wang <Strawberry_Str@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
So far, we only built Console programs, but we are about to introduce a
program that targets the Windows subsystem (i.e. it is a so-called "GUI"
program).
Let's handle this preemptively in the script that generates the Visual
Studio files.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
An upcoming commit will introduce those compile options; MSVC does not
understand them, so let's suppress them when generating the Visual
Studio project files.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, we also compile a "resource" file, which is similar to
source code, but contains metadata (such as the program version).
So far, we did not compile it in `MSVC` mode, only when compiling Git
for Windows with the GNU C Compiler.
In preparation for including it also when compiling with MS Visual C,
let's teach our `vcxproj` generator to handle those sort of files, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This seems to have been there since 259d87c354 (Add scripts to
generate projects for other buildsystems (MSVC vcproj, QMake),
2009-09-16), i.e. since the beginning of that file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It already caused problems with the test suite that the directory
containing `git.vcxproj` is called the same as the Git executable
without its file extension: `./git` is ambiguous, it could refer both to
the directory `git/` as well as to `git.exe`.
Now there is one more problem: when our GitHub workflow runs on the
`vs/master` branch, it fails in all but the Windows builds, as they want
to write the file `git` but there is already a directory in the way.
Let's just go ahead and append `.proj` to all of those directories, e.g.
`git.proj/` instead of `git/`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Add extra ':' to second 'all' target definition to allow 'scalar' to build.
Without this fix, the 'all:' and 'all::' targets together cause a build
failure when 'scalar' build is enabled with 'INCLUDE_SCALAR':
Makefile:14: *** target file `all' has both : and :: entries. Stop.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Built-in fsmonitor (part 2).
* jh/builtin-fsmonitor-part2: (30 commits)
t7527: test status with untracked-cache and fsmonitor--daemon
fsmonitor: force update index after large responses
fsmonitor--daemon: use a cookie file to sync with file system
fsmonitor--daemon: periodically truncate list of modified files
t/perf/p7519: add fsmonitor--daemon test cases
t/perf/p7519: speed up test on Windows
t/perf/p7519: fix coding style
t/helper/test-chmtime: skip directories on Windows
t/perf: avoid copying builtin fsmonitor files into test repo
t7527: create test for fsmonitor--daemon
t/helper/fsmonitor-client: create IPC client to talk to FSMonitor Daemon
help: include fsmonitor--daemon feature flag in version info
fsmonitor--daemon: implement handle_client callback
compat/fsmonitor/fsm-listen-darwin: implement FSEvent listener on MacOS
compat/fsmonitor/fsm-listen-darwin: add MacOS header files for FSEvent
compat/fsmonitor/fsm-listen-win32: implement FSMonitor backend on Windows
fsmonitor--daemon: create token-based changed path cache
fsmonitor--daemon: define token-ids
fsmonitor--daemon: add pathname classification
fsmonitor--daemon: implement 'start' command
...
"git ls-tree" learns "--oid-only" option, similar to "--name-only",
and more generalized "--format" option.
* tl/ls-tree-oid-only:
ls-tree: split up "fast path" callbacks
ls-tree: detect and error on --name-only --name-status
ls-tree: support --object-only option for "git-ls-tree"
ls-tree: introduce "--format" option
cocci: allow padding with `strbuf_addf()`
ls-tree: introduce struct "show_tree_data"
ls-tree: slightly refactor `show_tree()`
ls-tree: fix "--name-only" and "--long" combined use bug
ls-tree: simplify nesting if/else logic in "show_tree()"
ls-tree: rename "retval" to "recurse" in "show_tree()"
ls-tree: use "size_t", not "int" for "struct strbuf"'s "len"
ls-tree: use "enum object_type", not {blob,tree,commit}_type
ls-tree: add missing braces to "else" arms
ls-tree: remove commented-out code
ls-tree tests: add tests for --name-status
Tweaks in the command line prompt (in contrib/) code around its
GIT_PS1_SHOWUPSTREAM feature.
* jd/prompt-upstream-mark:
git-prompt: put upstream comments together
git-prompt: make long upstream state indicator consistent
git-prompt: make upstream state indicator location consistent
git-prompt: rename `upstream` to `upstream_type`
"git stash" does not allow subcommands it internally runs as its
implementation detail, except for "git reset", to emit messages;
now "git reset" part has also been squelched.
* vd/stash-silence-reset:
reset: show --no-refresh in the short-help
reset: remove 'reset.refresh' config option
reset: remove 'reset.quiet' config option
reset: do not make '--quiet' disable index refresh
stash: make internal resets quiet and refresh index
reset: suppress '--no-refresh' advice if logging is silenced
reset: replace '--quiet' with '--no-refresh' in performance advice
reset: introduce --[no-]refresh option to --mixed
reset: revise index refresh advice
Replace core.fsyncObjectFiles with two new configuration variables,
core.fsync and core.fsyncMethod.
* ns/core-fsyncmethod:
core.fsync: documentation and user-friendly aggregate options
core.fsync: new option to harden the index
core.fsync: add configuration parsing
core.fsync: introduce granular fsync control infrastructure
core.fsyncmethod: add writeout-only mode
wrapper: make inclusion of Windows csprng header tightly scoped
Stub in empty implementation of fsmonitor--daemon
backend for Darwin (aka MacOS).
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stub in empty filesystem listener backend for fsmonitor--daemon on Windows.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the 'reset.quiet' config option, remove '--no-quiet' documentation in
'Documentation/git-reset.txt'. In 4c3abd0551 (reset: add new reset.quiet
config setting, 2018-10-23), 'reset.quiet' was introduced as a way to
globally change the default behavior of 'git reset --mixed' to skip index
refresh.
However, now that '--quiet' does not affect index refresh, 'reset.quiet'
would only serve to globally silence logging. This was not the original
intention of the config setting, and there's no precedent for such a setting
in other commands with a '--quiet' option, so it appears to be obsolete.
In addition to the options & its documentation, remove 'reset.quiet' from
the recommended config for 'scalar'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 6d158cba28 (bash completion: Support "divergence from upstream"
messages in __git_ps1, 2010-06-17) introduced support for indicating
divergence from upstream in the PS1 prompt. The comments at the top of
git-prompt.sh that were introduced with that commit are several
paragraphs long. Over the years, other comments have been inserted in
between the paragraphs relating to divergence from upstream.
This commit puts the comments relating to divergence from upstream back
together.
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a pipe as a separator before long upstream state indicator. This is
consistent with long state indicators for sparse and in-progress
operations (e.g. merge).
For comparison, `__git_ps1` examples without upstream state indicator:
(main)
(main %)
(main *%)
(main|SPARSE)
(main %|SPARSE)
(main *%|SPARSE)
(main|SPARSE|REBASE 1/2)
(main %|SPARSE|REBASE 1/2)
Note that if there are long state indicators, they appear after short
state indicators if there are any, or after the branch name if there are
no short state indicators. Each long state indicator begins with a pipe
(`|`) as a separator.
Before/after examples with long upstream state indicator:
| Before | After |
| ------------------------------- | ------------------------------- |
| (main u=) | (main|u=) |
| (main u= origin/main) | (main|u= origin/main) |
| (main u+1) | (main|u+1) |
| (main u+1 origin/main) | (main|u+1 origin/main) |
| (main % u=) | (main %|u=) |
| (main % u= origin/main) | (main %|u= origin/main) |
| (main % u+1) | (main %|u+1) |
| (main % u+1 origin/main) | (main %|u+1 origin/main) |
| (main|SPARSE u=) | (main|SPARSE|u=) |
| (main|SPARSE u= origin/main) | (main|SPARSE|u= origin/main) |
| (main|SPARSE u+1) | (main|SPARSE|u+1) |
| (main|SPARSE u+1 origin/main) | (main|SPARSE|u+1 origin/main) |
| (main %|SPARSE u=) | (main %|SPARSE|u=) |
| (main %|SPARSE u= origin/main) | (main %|SPARSE|u= origin/main) |
| (main %|SPARSE u+1) | (main %|SPARSE|u+1) |
| (main %|SPARSE u+1 origin/main) | (main %|SPARSE|u+1 origin/main) |
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make upstream state indicator location more consistent with similar
state indicators (e.g. sparse). Group the short upstream state indicator
(`=`, `<`, `>`, or `<>`) with other short state indicators immediately
after the branch name. Previously short and long upstream state
indicators appeared after all other state indicators.
Use a separator (`SP` or `GIT_PS1_STATESEPARATOR`) between branch name
and short upstream state indicator. Previously the short upstream state
indicator would sometimes appear directly adjacent to the branch name
instead of being separated.
For comparison, `__git_ps1` examples without upstream state indicator:
(main)
(main %)
(main *%)
(main|SPARSE)
(main %|SPARSE)
(main *%|SPARSE)
(main|SPARSE|REBASE 1/2)
(main %|SPARSE|REBASE 1/2)
Note that if there are short state indicators, they appear together
after the branch name and separated from it by `SP` or
`GIT_PS1_STATESEPARATOR`.
Before/after examples with short upstream state indicator:
| Before | After |
| ---------------- | ---------------- |
| (main=) | (main =) |
| (main|SPARSE=) | (main =|SPARSE) |
| (main %|SPARSE=) | (main %=|SPARSE) |
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In `__git_ps1_show_upstream` rename the variable `upstream` to
`upstream_type`. This allows `__git_ps1_show_upstream` to reference a
variable named `upstream` that is declared `local` in `__git_ps1`, which
calls `__git_ps1_show_upstream`.
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A convenient way to pad strings is to use something like
`strbuf_addf(&buf, "%20s", "Hello, world!")`.
However, the Coccinelle rule that forbids a format `"%s"` with a
constant string argument cast too wide a net, and also forbade such
padding.
The original rule was introduced by commit:
28c23cd4c3 (strbuf.cocci: suggest strbuf_addbuf() to add one strbuf to an other, 2019-01-25)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If no --args are present after 'git restore', it assumes that you
want to tab-complete one of the files with unstaged uncommitted
changes.
If a file has been staged, we don't want to list it, as restoring those
requires a slightly more complex `git restore --staged`, so we only list
those files that are --modified. While --committable also looks like
a good candidate, that includes changes that have been staged.
Signed-off-by: David Cantrell <david@cantrell.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile refactoring with a bit of suffixes rule stripping to
optimize the runtime overhead.
* ab/make-optim-noop:
Makefiles: add and use wildcard "mkdir -p" template
Makefile: add "$(QUIET)" boilerplate to shared.mak
Makefile: move $(comma), $(empty) and $(space) to shared.mak
Makefile: move ".SUFFIXES" rule to shared.mak
Makefile: define $(LIB_H) in terms of $(FIND_SOURCE_FILES)
Makefile: disable GNU make built-in wildcard rules
Makefiles: add "shared.mak", move ".DELETE_ON_ERROR" to it
scalar Makefile: use "The default target of..." pattern
This commit introduces the `core.fsyncMethod` configuration
knob, which can currently be set to `fsync` or `writeout-only`.
The new writeout-only mode attempts to tell the operating system to
flush its in-memory page cache to the storage hardware without issuing a
CACHE_FLUSH command to the storage controller.
Writeout-only fsync is significantly faster than a vanilla fsync on
common hardware, since data is written to a disk-side cache rather than
all the way to a durable medium. Later changes in this patch series will
take advantage of this primitive to implement batching of hardware
flushes.
When git_fsync is called with FSYNC_WRITEOUT_ONLY, it may fail and the
caller is expected to do an ordinary fsync as needed.
On Apple platforms, the fsync system call does not issue a CACHE_FLUSH
directive to the storage controller. This change updates fsync to do
fcntl(F_FULLFSYNC) to make fsync actually durable. We maintain parity
with existing behavior on Apple platforms by setting the default value
of the new core.fsyncMethod option.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The $(QUIET) variables we define are largely duplicated between our
various Makefiles, let's define them in the new "shared.mak" instead.
Since we're not using the environment to pass these around we don't
need to export the "QUIET_GEN" and "QUIET_BUILT_IN" variables
anymore. The "QUIET_GEN" variable is used in "git-gui/Makefile" and
"gitweb/Makefile", but they've got their own definition for those. The
"QUIET_BUILT_IN" variable is only used in the top-level "Makefile". We
still need to export the "V" variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have various behavior that's shared across our Makefiles, or that
really should be (e.g. via defined templates). Let's create a
top-level "shared.mak" to house those sorts of things, and start by
adding the ".DELETE_ON_ERROR" flag to it.
See my own 7b76d6bf22 (Makefile: add and use the ".DELETE_ON_ERROR"
flag, 2021-06-29) and db10fc6c09 (doc: simplify Makefile using
.DELETE_ON_ERROR, 2021-05-21) for the addition and use of the
".DELETE_ON_ERROR" flag.
I.e. this changes the behavior of existing rules in the altered
Makefiles (except "Makefile" & "Documentation/Makefile"). I'm
confident that this is safe having read the relevant rules in those
Makfiles, and as the GNU make manual notes that it isn't the default
behavior is out of an abundance of backwards compatibility
caution. From edition 0.75 of its manual, covering GNU make 4.3:
[Enabling '.DELETE_ON_ERROR' is] almost always what you want
'make' to do, but it is not historical practice; so for
compatibility, you must explicitly request it.
This doesn't introduce a bug by e.g. having this
".DELETE_ON_ERROR" flag only apply to this new shared.mak, Makefiles
have no such scoping semantics.
It does increase the danger that any Makefile without an explicit "The
default target of this Makefile is..." snippet to define the default
target as "all" could have its default rule changed if our new
shared.mak ever defines a "real" rule. In subsequent commits we'll be
careful not to do that, and such breakage would be obvious e.g. in the
case of "make -C t".
We might want to make that less fragile still (e.g. by using
".DEFAULT_GOAL" as noted in the preceding commit), but for now let's
simply include "shared.mak" without adding that boilerplate to all the
Makefiles that don't have it already. Most of those are already
exposed to that potential caveat e.g. due to including "config.mak*".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "contrib/scalar/Makefile" be stylistically consistent with
the top-level "Makefile" in first declaring "all" to be the default
rule, followed by including other Makefile snippets.
This adjusts code added in 0a43fb2202 (scalar: create a rudimentary
executable, 2021-12-03), it further ensures that when we add another
"include" file in a subsequent commit that the included file won't be
the one to define our default target.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script uses "git show -s" to display the title of the merge
commit being studied, without explicitly disabling the pager, which
is not a safe thing to do in a script.
For example, when the pager is set to "less" with "-SF" options (-S
tells the pager not to fold lines but allow horizontal scrolling to
show the overly long lines, -F tells the pager not to wait if the
output in its entirety is shown on a single page), and the title of
the merge commit is longer than the width of the terminal, the pager
will wait until the end-user tells it to quit after showing the
single line.
Explicitly disable the pager with this "git show" invocation to fix
this.
The command uses the "--pretty=format:..." format, which adds LF in
between each pair of commits it outputs, which means that the label
for the merge being learned from will be followed by the next
message on the same line. "--pretty=tformat:..." is what we should
instead, which adds LF after each commit, or a more modern way to
spell it, i.e. "--format=...". This existing breakage becomes
easier to see, now we no longer use the pager.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line completion script (in contrib/) learned to
complete all Git subcommands, including the ones that are normally
hidden, when GIT_COMPLETION_SHOW_ALL_COMMANDS is used.
* ab/complete-show-all-commands:
completion: add a GIT_COMPLETION_SHOW_ALL_COMMANDS
completion tests: re-source git-completion.bash in a subshell
When "git subtree" wants to create a merge, it used "git merge" and
let it be affected by end-user's "merge.ff" configuration, which
has been corrected.
* tk/subtree-merge-not-ff-only:
subtree: force merge commit
The command line completion (in contrib/) learns to complete
arguments to give to "git sparse-checkout" command.
* ld/sparse-index-bash-completion:
completion: handle unusual characters for sparse-checkout
completion: improve sparse-checkout cone mode directory completion
completion: address sparse-checkout issues
