Fix to the code to produce progress bar, which is new in the
upcoming release.
* tb/commit-graph-no-check-oids:
commit-graph: fix "Collecting commits from input" progress line
The code to produce progress output from "git commit-graph --write"
had a few breakages, which have been fixed.
* sg/commit-graph-progress-fix:
commit-graph: fix "Writing out commit graph" progress counter
commit-graph: fix progress of reachable commits
When an aliased command, whose output is piped to a pager by git,
gets killed by a signal, the pager got into a funny state, which
has been corrected (again).
* ta/wait-on-aliased-commands-upon-signal:
Wait for child on signal death for aliases to externals
Wait for child on signal death for aliases to builtins
The completion for diff command was added in fd0bc17557 but
missed the show command which also supports --color-moved[-ws].
This suffers from the very same problem [1] as the referenced
commit: no comma-separated list completion for --color-moved-ws.
[1]: https://github.com/scop/bash-completion/issues/240
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To display a progress line while reading commits from standard input
and looking them up, 5b6653e523 (builtin/commit-graph.c: dereference
tags in builtin, 2020-05-13) should have added a pair of
start_delayed_progress() and stop_progress() calls around the loop
reading stdin. Alas, the stop_progress() call ended up at the wrong
place, after write_commit_graph(), which does all the commit-graph
computation and writing, and has several progress lines of its own.
Consequently, that new
Collecting commits from input: 1234
progress line is overwritten by the first progress line shown by
write_commit_graph(), and its final "done" line is shown last, after
everything is finished:
$ { sleep 3 ; git rev-list -3 HEAD ; sleep 1 ; } | ~/src/git/git commit-graph write --stdin-commits
Expanding reachable commits in commit graph: 873402, done.
Writing out commit graph in 4 passes: 100% (3493608/3493608), done.
Collecting commits from input: 3, done.
Furthermore, that stop_progress() call was added after the 'cleanup'
label, where that loop reading stdin jumps in case of an error. In
case of invalid input this then results in the "done" line shown after
the error message:
$ { sleep 3 ; git rev-list -3 HEAD ; echo junk ; } | ~/src/git/git commit-graph write --stdin-commits
error: unexpected non-hex object ID: junk
Collecting commits from input: 3, done.
Move that stop_progress() call to the right place.
While at it, drop the unnecessary 'if (progress)' condition protecting
the stop_progress() call, because that function is prepared to handle
a NULL progress struct.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier "fix" to this script gave up updating it not to rely on
the current time because we cannot control what timestamp subversion
gives its commits. We however could solve the issue in a different
way and still use deterministic timestamps on Git commits.
One fix would be to sort the list of trees before removing duplicates,
but that loses information:
- we do care that the fetched history is in the same order
- there's a tree which appears twice in the history, and we'd want to
make sure that it's there both times
So instead, let's de-duplicate using a hash (preserving the order), and
drop only lines with identical trees and subjects (preserving the tree
which appears twice, since it has different subjects each time).
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We always set the name and email for committer and author idents to make
the test suite more deterministic, but not timestamps. Many scripts use
test_tick to get consistent and sensibly incrementing timestamps as they
create commits. But other scripts don't particularly care about the
timestamp, and are happy to use whatever the current system time is.
This non-determinism can be annoying:
- when debugging a test, comparing results between two runs can be
difficult, because the commit ids change
- this can sometimes cause tests to be racy. E.g., traversal order
depends on timestamp order. Even in a well-ordered set of commands,
because our timestamp granularity is one second, two commits might
sometimes have the same timestamp and sometimes differ.
Let's set a default timestamp for all scripts to use. Any that use
test_tick already will be unaffected (because their first test_tick call
will overwrite our default), but it will make things a bit more
deterministic for those that don't.
We should be able to choose any time we want here. I picked this one
because:
- it differs from the initial test_tick default, which may make it
easier to distinguish when debugging tests. I picked "April 1st
13:14:15" in the hope that it might stand out.
- it's slightly before the test_tick default. Some tests create some
commits before the first call to test_tick, so using an older
timestamps for those makes sense chronologically. Note that this
isn't how things currently work (where system times are usually more
recent than test_tick), but that also allows us to flush out a few
hidden timestamp dependencies (like the one recently fixed in
t5539).
- we could likewise pick any timezone we want. Choosing +0000 would
have required fixing up fewer tests, but we're more likely to turn
up interesting cases by not matching $TZ exactly. And since
test_tick already checks "-0700", let's try something in the "+"
zone range for variety.
It's possible that the non-deterministic times could help flush out bugs
(e.g., if something broke when the clock flipped over to 2021, our test
suite would let us know). But historically that hasn't been the case;
all time-dependent outcomes we've seen turned out to be accidentally
flaky tests (which we fixed by using test_tick). If we do want to cover
handling the current time, we should dedicate one script to doing so,
and have it unset GIT_COMMITTER_DATE explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The early part of t9100 creates an unusual "doubled" history in the
"git-svn" ref. When we get to t9100.17, it looks like this:
$ git log --oneline --graph git-svn
[...]
* efd0303 detect node change from file to directory #2
|\
* | 3e727c0 detect node change from file to directory #2
|/
* 3b00468 try a deep --rmdir with a commit
|\
* | b4832d8 try a deep --rmdir with a commit
|/
* f0d7bd5 import for git svn
Each commit we make with "git commit" is paired with one from "git svn
set-tree", with the latter as a merge of the first and its grandparent.
Later, t9100.17 wants to check that "git svn fetch" gets the same trees.
And it does, but just one copy of each. So it uses rev-list to get the
tree of each commit and pipes it to "uniq" to drop the duplicates. Our
input isn't sorted, but it will find adjacent duplicates. This works
reliably because the order of commits from rev-list always shows the
duplicates next to each other. For any one of those merges, we could
choose to show its duplicate or the grandparent first. But barring
clocks running backwards, the duplicate will always have a time equal to
or greater than the grandparent. Even if equal, we break ties by showing
the first-parent first, so the duplicates remain adjacent.
But this would break if the timestamps stopped moving in chronological
order. Normally we would rely on test_tick for this, but we have _two_
sources of time here:
- "git commit" creates one commit based on GIT_COMMITTER_DATE (which
respects test_tick)
- the "svn set-tree" one is based on subversion, which does not have
an easy way to specify a timestamp
So using test_tick actually breaks the test, because now the duplicates
are far in the past, and we'll show the grandparent before the
duplicate. And likewise, a proposed change to set GIT_COMMITTER_DATE in
all scripts will break it.
We _could_ fix this by sorting before removing duplicates, but
presumably it's a useful part of the test to make sure the trees appear
in the same order in both spots. Likewise, we could use something like:
perl -ne 'print unless $seen{$_}++'
to remove duplicates without impacting the order. But that doesn't work
either, because there are actually multiple (non-duplicate) commits with
the same trees (we change a file mode and then change it back). So we'd
actually have to de-duplicate the combination of subject and tree. Which
then further throws off t9100.18, which compares the tree hashes
exactly; we'd have to strip the result back down.
Since this test _isn't_ buggy, the simplest thing is to just work around
the proposed change by documenting our expectation that git-created
commits are correctly interleaved using the current time.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of `git diff` goes through several different invocations
(numbering added by me):
1. git diff [<options>] [--] [<path>...]
2. git diff [<options>] --no-index [--] <path> <path>
3. git diff [<options>] --cached [<commit>] [--] [<path>...]
4. git diff [<options>] <commit> [--] [<path>...]
5. git diff [<options>] <commit> <commit> [--] [<path>...]
6. git diff [<options>] <commit>..<commit> [--] [<path>...]
7. git diff [<options>] <commit> <commit>... <commit> [--] [<path>...]
8. git diff [<options>] <commit>...<commit> [--] [<path>...]
It then goes on to say that "all of the <commit> in the above
description, except in the last two forms that use '..' notations, can
be any <tree>". The "last two" actually refers to 6 and 8. This got out
of sync in commit b7e10b2ca2 ("Documentation: usage for diff combined
commits", 2020-06-12) which added item 7 to the mix.
As a further complication, after b7e10b2ca2 we also have some potential
confusion around "the '..' notation". The "..[.]" in items 6 and 8 are
part of the rev notation, whereas the "..." in item 7 is manpage
language for "one or more".
Move item 6 down, i.e., to between 7 and 8, to restore the ordering.
Because 6 refers to 5 ("synonymous to the previous form") we need to
tweak the language a bit.
An added bonus of this commit is that we're trying to steer users away
from `git diff <commit>..<commit>` and moving it further down probably
doesn't hurt.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b7e10b2ca2 ("Documentation: usage for diff combined commits",
2020-06-12) modified the synopsis by adding an optional "[<commit>...]"
to
'git diff' [<options>] <commit> <commit> [--] [<path>...]
to effectively add
'git diff' [<options>] <commit> <commit>... <commit> [--] [<path>...]
as another valid invocation. Which makes sense.
Further down, in the description, it left the existing entry for
'git diff' [<options>] <commit> <commit> [--] [<path>...]
intact and added a new entry on
'git diff' [<options>] <commit> [<commit>...] <commit> [--] [<path>...]
where it says that "[t]his form is to view the results of a merge
commit" and details how "the first listed commit must be the merge
itself". But one possible instantiation of this form is `git diff
<commit> <commit>` for which the added text doesn't really apply.
Remove the brackets so that we lose this overlap between the two
descriptions. We can still use the more compact representation in the
synopsis.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rebase is implemented with two different backends - 'apply' and
'merge' each of which support a different set of options. In
particular the apply backend supports a number of options implemented
by 'git am' that are not implemented in the merge backend. This means
that the available options are different depending on which backend is
used which is confusing. This patch adds support for the
--ignore-whitespace option to the merge backend. This option treats
lines with only whitespace changes as unchanged and is implemented in
the merge backend by translating it to -Xignore-space-change.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regarding reflog messages:
- We expect that a reflog message consists of a single line. The
file format used by the files backend may add a LF after the
message as a delimiter, and output by commands like "git log -g"
may complete such an incomplete line by adding a LF at the end,
but philosophically, the terminating LF is not a part of the
message.
- We however allow callers of refs API to supply a random sequence
of NUL terminated bytes. We cleanse caller-supplied message by
squashing a run of whitespaces into a SP, and by trimming trailing
whitespace, before storing the message. This is how we tolerate,
instead of erring out, a message with LF in it (be it at the end,
in the middle, or both).
Currently, the cleansing of the reflog message is done by the files
backend, before the log is written out. This is sufficient with the
current code, as that is the only backend that writes reflogs. But
new backends can be added that write reflogs, and we'd want the
resulting log message we would read out of "log -g" the same no
matter what backend is used, and moving the code to do so to the
generic layer is a way to do so.
An added benefit is that the "cleansing" function could be updated
later, independent from individual backends, to e.g. allow
multi-line log messages if we wanted to, and when that happens, it
would help a lot to ensure we covered all bases if the cleansing
function (which would be updated) is called from the generic layer.
Side note: I am not interested in supporting multi-line reflog
messages right at the moment (nobody is asking for it), but I
envision that instead of the "squash a run of whitespaces into a SP
and rtrim" cleansing, we can %urlencode problematic bytes in the
message *AND* append a SP at the end, when a new version of Git that
supports multi-line and/or verbatim reflog messages writes a reflog
record. The reading side can detect the presense of SP at the end
(which should have been rtrimmed out if it were written by existing
versions of Git) as a signal that decoding %urlencode recovers the
original reflog message.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both the git-bisect.sh as bisect--helper inspected the file system
directly.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adding tests for refs pointing to tree and blob shows that
we care about testing both positive ("see, my shiny new toy
does work") and negative ("and it won't do nonsensical
things when given an input it is not designed to work with")
cases.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's avoid a big dense paragraph by using an unordered
list for the %(contents:XXXX) format specifiers.
While at it let's also make the following improvements:
- Let's not describe %(contents) using "complete message"
as it's not clear what an incomplete message is.
- Let's improve how the "subject" and "body" are
described.
- Let's state that "signature" is only available for
tag objects.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test for "no shallow lines after receiving ACK ready" is very
sensitive to the timestamps of the commits we create. It's looking for
the fetch negotiation to send a "ready", which in turn depends on the
order in which we traverse commits during the negotiation.
It works reliably now because the base commit "7" is created without
test_commit, and thus gets a commit time matching the current system
clock. Whereas the new commits created in this test do use test_commit,
and get the usual test_tick time from 2005. So the fetch into the
"clone" repository results in a commit graph like this (I omitted some
of the "unrelated" commits for clarity; they're all just a sequence of
test_ticks):
$ git log --graph --format='%ct %s %d'
* 1112912953 new (origin/master, origin/HEAD)
* 1594322236 7 (grafted, master)
* 1112912893 unrelated15 (origin/unrelated15, unrelated15)
[...]
* 1112912053 unrelated1 (origin/unrelated1, unrelated1)
* 1112911993 new-too (HEAD -> newnew, tag: new-too)
The important things to see are:
- "7" is way in the future compared to the other commits
- "new-too" in the fetching repo is older than "new" (and its
"unrelated" ancestors) in the shallow repo
If we change our "setup shallow clone" step to use test_tick, too (and
get rid of the dependency on the system clock), then the test will fail.
The resulting graph looks like this:
$ git log --graph --format='%ct %s %d'
* 1112913373 new (origin/master, origin/HEAD)
* 1112912353 7 (grafted, master)
* 1112913313 unrelated15 (origin/unrelated15, unrelated15)
[...]
* 1112912473 unrelated1 (origin/unrelated1, unrelated1)
* 1112912413 new-too (HEAD -> newnew, tag: new-too)
Our "new-too" is still older than "new" and "unrelated", but now "7" is
older than all of them (because it advanced test_tick, which the other
tests built on top of). In the original, we advertised "7" as the first
"have" before anything else, but now "new-too" is more recent. You'd see
the same thing in the unlikely event that the system clock was set
before our test_tick default in 2005.
Let's make the timing requirements more explicit. The important thing is
that the client advertise all of its shared commits first, before
presenting its unique "new-too" commit. We can do that and get rid of
the system clock dependency at the same time by creating all of the
shared commits around time X (using test_tick), and then creating
"new-too" with some time long before X. The resulting graph looks like
this:
$ git log --graph --format='%ct %s %d'
* 1500001380 new (origin/master, origin/HEAD)
* 1500000420 7 (grafted, master)
* 1500001320 unrelated15 (origin/unrelated15, unrelated15)
[...]
* 1500000480 unrelated1 (origin/unrelated1, unrelated1)
* 1400000060 new-too (HEAD -> newnew, tag: new-too)
That also lets us get rid of the hacky test_tick added by f0e802ca20
(t5539: update a flaky test, 2014-07-14). That was clearly dancing
around the same problem, but only addressed the relationship between
commits created in the two subshells (which did use test_tick, but
overlapped because increments of test_tick in subshells are lost). Now
that we're using consistent and well-placed times for both lines of
history, we don't have to care about a one-tick difference between the
two sides.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few of the perl tests in t9700 ask for the author and committer ident,
and then make sure we get something sensible. For the timestamp portion,
we just match [0-9]+, because the actual value will depend on when the
test is run. However, we do require that the timezone be "+0000". This
works reliably because we set $TZ in test-lib.sh. But in preparation for
changing the default timezone, let's be a bit more flexible. We don't
actually care about the exact value here, just that we were able to get
a sensible output from the perl module's access methods.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git clone with --separate-git-dir realgitdir and
realgitdir already exists, it's content is destroyed.
So, make sure we don't clone into an existing non-empty directory.
When d45420c1 (clone: do not clean up directories we didn't create,
2018-01-02) tightened the clean-up procedure after a failed cloning
into an empty directory, it assumed that the existing directory
given is an empty one so it is OK to keep that directory, while
running the clean-up procedure that is designed to remove everything
in it (since there won't be any, anyway). Check and make sure that
the $GIT_DIR is empty even cloning into an existing repository.
Signed-off-by: Ben Wijen <ben@wijen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git often requests `strbuf_realpath(path + "/.git")`, where "./git" does
not yet exist on disk.
This causes the following to happen:
1. `mingw_strbuf_realpath()` fails
2. Non-mingw `strbuf_realpath()` does the work
3. Result of `strbuf_realpath()` is slightly different, for example it
will not normalize the case of disk/folder names
4. `needs_work_tree_config()` becomes confused by these differences
5. clone adds `core.worktree` setting
This in turn causes various problems, for example:
1. Repository folder can no longer be renamed/moved without breaking it
2. Using the repository on WSL (Windows Subsystem for Linux) doesn't
work, because it has windows-style path saved
This fixes https://github.com/git-for-windows/git/issues/2569
Co-Authored-By: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
This change enhances `git commit --cleanup=scissors` by detecting
scissors lines ending in either LF (UNIX-style) or CR/LF (DOS-style).
Regression tests are included to specifically test for trailing
comments after a CR/LF-terminated scissors line.
Signed-off-by: Luke Bonanomi <lbonanomi@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
As of Git for Windows v2.27.0, there is an option to use Windows'
newly-introduced Pseudo Console support. When running an interactive add
operation with this support enabled, Git will receive CR/LF line
endings.
Therefore, let's not pretend that we are expecting Unix line endings.
This fixes https://github.com/git-for-windows/git/issues/2729
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In https://github.com/git-for-windows/git/pull/2637, we fixed a bug
where symbolic links' target path sizes were recorded incorrectly in the
index.
However, we did so only in `mingw_lstat()` but not in `fscache_lstat()`.
Meaning: in code paths where the FSCache feature is enabled, Git _still_
got the wrong idea if the symbolic link target's length.
Let's fix this.
Note: as the FSCache feature reads in whole swaths of directory entries
in batch mode, even if metadata for only one of them might be required,
we save the expensive `CreateFile()` call that is required to compute
the symbolic link target's length to the `fscache_lstat()` call.
This fixes https://github.com/git-for-windows/git/issues/2653.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In https://github.com/git-for-windows/git/pull/2637, we fixed a bug
where symbolic links' target path sizes were recorded incorrectly in the
index. The downside of this fix was that every user with tracked
symbolic links in their checkouts would see them as modified in `git
status`, but not in `git diff`, and only a `git add <path>` (or `git add
-u`) would "fix" this.
Let's do better than that: we can detect that situation and simply
pretend that a symbolic link with a known bad size (or a size that just
happens to be that bad size, a _very_ unlikely scenario because it would
overflow our buffers due to the trailing NUL byte) means that it needs
to be re-checked as if we had just checked it out.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch re-adds the deprecated --stdin/-z options to `git
reset`. Those patches were overridden by a different set of options in
the upstream Git project before we could propose `--stdin`.
We offered this in MinGit to applications that wanted a safer way to
pass lots of pathspecs to Git, and these applications will need to be
adjusted.
Instead of `--stdin`, `--pathspec-from-file=-` should be used, and
instead of `-z`, `--pathspec-file-nul`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This branch allows third-party tools to call `git status
--no-lock-index` to avoid lock contention with the interactive Git usage
of the actual human user.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We already avoid traversing NTFS junction points in `git clean -dfx`.
With this topic branch, we do that when the FSCache is enabled, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
