Symlinks on Windows don't work the same way as on Unix systems. E.g. there
are different types of symlinks for directories and files, creating
symlinks requires administrative privileges etc.
By default, disable symlink support on Windows. I.e. users explicitly have
to enable it with 'git config [--system|--global] core.symlinks true'.
The test suite ignores system / global config files. Allow testing *with*
symlink support by checking if native symlinks are enabled in MSys2 (via
'MSYS=winsymlinks:nativestrict').
Reminder: This would need to be changed if / when we find a way to run the
test suite in a non-MSys-based shell (e.g. dash).
Signed-off-by: Karsten Blees <blees@dcon.de>
The retry pattern is duplicated in three places. It also seems to be too
hard to use: mingw_unlink() and mingw_rmdir() duplicate the code to retry,
and both of them do so incompletely. They also do not restore errno if the
user answers 'no'.
Introduce a retry_ask_yes_no() helper function that handles retry with
small delay, asking the user, and restoring errno.
mingw_unlink: include _wchmod in the retry loop (which may fail if the
file is locked exclusively).
mingw_rmdir: include special error handling in the retry loop.
Signed-off-by: Karsten Blees <blees@dcon.de>
Git typically doesn't trust the stat.st_size member of symlinks (e.g. see
strbuf_readlink()). However, some functions take shortcuts if st_size is 0
(e.g. diff_populate_filespec()).
In mingw_lstat() and fscache_lstat(), make sure to return an adequate size.
The extra overhead of opening and reading the reparse point to calculate
the exact size is not necessary, as git doesn't rely on the value anyway.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Move S_IFLNK detection to file_attr_to_st_mode() and reuse it in fscache.
Implement DT_LNK detection in dirent.c and the fscache readdir version.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When obtaining lstat information for reparse points, we need to call
FindFirstFile() in addition to GetFileInformationEx() to obtain the type
of the reparse point (symlink, mount point etc.). However, currently there
is no error handling whatsoever if FindFirstFile() fails.
Call FindFirstFile() before modifying the stat *buf output parameter and
error out if the call fails.
Note: The FindFirstFile() return value includes all the data that we get
from GetFileAttributesEx(), so we could replace GetFileAttributesEx() with
FindFirstFile(). We don't do that because GetFileAttributesEx() is about
twice as fast for single files. I.e. we only pay the extra cost of calling
FindFirstFile() in the rare case that we encounter a reparse point.
Note: The indentation of the remaining reparse point code will be fixed in
the next patch.
Signed-off-by: Karsten Blees <blees@dcon.de>
With the new mingw_stat() implementation, do_lstat() is only called from
mingw_lstat() (with follow == 0). Remove the extra function and the old
mingw_stat()-specific (follow == 1) logic.
Signed-off-by: Karsten Blees <blees@dcon.de>
With respect to symlinks, the current stat() implementation is almost the
same as lstat(): except for the file type (st_mode & S_IFMT), it returns
information about the link rather than the target.
Implement stat by opening the file with as little permissions as possible
and calling GetFileInformationByHandle on it. This way, all link resoltion
is handled by the Windows file system layer.
If symlinks are disabled, use lstat() as before, but fail with ELOOP if a
symlink would have to be resolved.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
GetFileAttributes cannot handle paths with trailing dir separator. The
current [l]stat implementation calls GetFileAttributes twice if the path
has trailing slashes (first with the original path passed to [l]stat, and
and a second time with a path copy with trailing '/' removed).
With Unicode conversion, we get the length of the path for free and also
have a (wide char) buffer that can be modified.
Remove trailing directory separators before calling the Win32 API.
Signed-off-by: Karsten Blees <blees@dcon.de>
A change between versions 2.4.1 and 2.6.0 of the MSYS2 runtime modified
how Cygwin's runtime (and hence Git for Windows' MSYS2 runtime
derivative) handles locales: d16a56306d (Consolidate wctomb/mbtowc calls
for POSIX-1.2008, 2016-07-20).
An unintended side-effect is that "cold-calling" into the POSIX
emulation will start with a locale based on the current code page,
something that Git for Windows is very ill-prepared for, as it expects
to be able to pass a command-line containing non-ASCII characters to the
shell without having those characters munged.
One symptom of this behavior: when `git clone` or `git fetch` shell out
to call `git-upload-pack` with a path that contains non-ASCII
characters, the shell tried to interpret the entire command-line
(including command-line parameters) as executable path, which obviously
must fail.
This fixes https://github.com/git-for-windows/git/issues/1036
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We introduced helper macros to simplify loading functions dynamically.
Might just as well use them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Accessing the Windows console through the special CONIN$ / CONOUT$ devices
doesn't work properly for non-ASCII usernames an passwords.
It also doesn't work for terminal emulators that hide the native console
window (such as mintty), and 'TERM=xterm*' is not necessarily a reliable
indicator for such terminals.
The new shell_prompt() function, on the other hand, works fine for both
MSys1 and MSys2, in native console windows as well as mintty, and properly
supports Unicode. It just needs bash on the path (for 'read -s', which is
bash-specific).
On Windows, try to use the shell to read from the terminal. If that fails
with ENOENT (i.e. bash was not found), use CONIN/OUT as fallback.
Note: To test this, create a UTF-8 credential file with non-ASCII chars,
e.g. in git-bash: 'echo url=http://täst.com > cred.txt'. Then in git-cmd,
'git credential fill <cred.txt' works (shell version), while calling git
without the git-wrapper (i.e. 'mingw64\bin\git credential fill <cred.txt')
mangles non-ASCII chars in both console output and input.
Signed-off-by: Karsten Blees <blees@dcon.de>
The `git_terminal_prompt()` function expects the terminal window to be
attached to a Win32 Console. However, this is not the case with terminal
windows other than `cmd.exe`'s, e.g. with MSys2's own `mintty`.
Non-cmd terminals such as `mintty` still have to have a Win32 Console
to be proper console programs, but have to hide the Win32 Console to
be able to provide more flexibility (such as being resizeable not only
vertically but also horizontally). By writing to that Win32 Console,
`git_terminal_prompt()` manages only to send the prompt to nowhere and
to wait for input from a Console to which the user has no access.
This commit introduces a function specifically to support `mintty` -- or
other terminals that are compatible with MSys2's `/dev/tty` emulation. We
use the `TERM` environment variable as an indicator for that: if the value
starts with "xterm" (such as `mintty`'s "xterm_256color"), we prefer to
let `xterm_prompt()` handle the user interaction.
The most prominent user of `git_terminal_prompt()` is certainly
`git-remote-https.exe`. It is an interesting use case because both
`stdin` and `stdout` are redirected when Git calls said executable, yet
it still wants to access the terminal.
When running inside a `mintty`, the terminal is not accessible to the
`git-remote-https.exe` program, though, because it is a MinGW program
and the `mintty` terminal is not backed by a Win32 console.
To solve that problem, we simply call out to the shell -- which is an
*MSys2* program and can therefore access `/dev/tty`.
Helped-by: nalla <nalla@hamal.uberspace.de>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
MSys2's strace facility is very useful for debugging... With this patch,
the bash will be executed through strace if the environment variable
GIT_STRACE_COMMANDS is set, which comes in real handy when investigating
issues in the test suite.
Also support passing a path to a log file via GIT_STRACE_COMMANDS to
force Git to call strace.exe with the `-o <path>` argument, i.e. to log
into a file rather than print the log directly.
That comes in handy when the output would otherwise misinterpreted by a
calling process as part of Git's output.
Note: the values "1", "yes" or "true" are *not* specifying paths, but
tell Git to let strace.exe log directly to the console.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Windows paths are typically limited to MAX_PATH = 260 characters, even
though the underlying NTFS file system supports paths up to 32,767 chars.
This limitation is also evident in Windows Explorer, cmd.exe and many
other applications (including IDEs).
Particularly annoying is that most Windows APIs return bogus error codes
if a relative path only barely exceeds MAX_PATH in conjunction with the
current directory, e.g. ERROR_PATH_NOT_FOUND / ENOENT instead of the
infinitely more helpful ERROR_FILENAME_EXCED_RANGE / ENAMETOOLONG.
Many Windows wide char APIs support longer than MAX_PATH paths through the
file namespace prefix ('\\?\' or '\\?\UNC\') followed by an absolute path.
Notable exceptions include functions dealing with executables and the
current directory (CreateProcess, LoadLibrary, Get/SetCurrentDirectory) as
well as the entire shell API (ShellExecute, SHGetSpecialFolderPath...).
Introduce a handle_long_path function to check the length of a specified
path properly (and fail with ENAMETOOLONG), and to optionally expand long
paths using the '\\?\' file namespace prefix. Short paths will not be
modified, so we don't need to worry about device names (NUL, CON, AUX).
Contrary to MSDN docs, the GetFullPathNameW function doesn't seem to be
limited to MAX_PATH (at least not on Win7), so we can use it to do the
heavy lifting of the conversion (translate '/' to '\', eliminate '.' and
'..', and make an absolute path).
Add long path error checking to xutftowcs_path for APIs with hard MAX_PATH
limit.
Add a new MAX_LONG_PATH constant and xutftowcs_long_path function for APIs
that support long paths.
While improved error checking is always active, long paths support must be
explicitly enabled via 'core.longpaths' option. This is to prevent end
users to shoot themselves in the foot by checking out files that Windows
Explorer, cmd/bash or their favorite IDE cannot handle.
Test suite:
Test the case is when the full pathname length of a dir is close
to 260 (MAX_PATH).
Bug report and an original reproducer by Andrey Rogozhnikov:
https://github.com/msysgit/git/pull/122#issuecomment-43604199
[jes: adjusted test number to avoid conflicts, added support for
chdir(), etc]
Thanks-to: Martin W. Kirst <maki@bitkings.de>
Thanks-to: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Original-test-by: Andrey Rogozhnikov <rogozhnikov.andrey@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
If multiple threads access a directory that is not yet in the cache, the
directory will be loaded by each thread. Only one of the results is added
to the cache, all others are leaked. This wastes performance and memory.
On cache miss, add a future object to the cache to indicate that the
directory is currently being loaded. Subsequent threads register themselves
with the future object and wait. When the first thread has loaded the
directory, it replaces the future object with the result and notifies
waiting threads.
Signed-off-by: Karsten Blees <blees@dcon.de>
Checking the work tree status is quite slow on Windows, due to slow lstat
emulation (git calls lstat once for each file in the index). Windows
operating system APIs seem to be much better at scanning the status
of entire directories than checking single files.
Add an lstat implementation that uses a cache for lstat data. Cache misses
read the entire parent directory and add it to the cache. Subsequent lstat
calls for the same directory are served directly from the cache.
Also implement opendir / readdir / closedir so that they create and use
directory listings in the cache.
The cache doesn't track file system changes and doesn't plug into any
modifying file APIs, so it has to be explicitly enabled for git functions
that don't modify the working copy.
Note: in an earlier version of this patch, the cache was always active and
tracked file system changes via ReadDirectoryChangesW. However, this was
much more complex and had negative impact on the performance of modifying
git commands such as 'git checkout'.
Signed-off-by: Karsten Blees <blees@dcon.de>
Add a macro to mark code sections that only read from the file system,
along with a config option and documentation.
This facilitates implementation of relatively simple file system level
caches without the need to synchronize with the file system.
Enable read-only sections for 'git status' and preload_index.
Signed-off-by: Karsten Blees <blees@dcon.de>
Emulating the POSIX lstat API on Windows via GetFileAttributes[Ex] is quite
slow. Windows operating system APIs seem to be much better at scanning the
status of entire directories than checking single files. A caching
implementation may improve performance by bulk-reading entire directories
or reusing data obtained via opendir / readdir.
Make the lstat implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Emulating the POSIX dirent API on Windows via FindFirstFile/FindNextFile is
pretty staightforward, however, most of the information provided in the
WIN32_FIND_DATA structure is thrown away in the process. A more
sophisticated implementation may cache this data, e.g. for later reuse in
calls to lstat.
Make the dirent implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Define a base DIR structure with pointers to readdir/closedir that match
the opendir implementation (i.e. similar to vtable pointers in OOP).
Define readdir/closedir so that they call the function pointers in the DIR
structure. This allows to choose the opendir implementation on a
call-by-call basis.
Move the fixed sized dirent.d_name buffer to the dirent-specific DIR
structure, as d_name may be implementation specific (e.g. a caching
implementation may just set d_name to point into the cache instead of
copying the entire file name string).
Signed-off-by: Karsten Blees <blees@dcon.de>
We will use them in the upcoming "FSCache" patches (to accelerate
sequential lstat() calls).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch conflicts with the next change that will change the
way we call `CreateProcessW()`. So let's merge it early, to avoid merge
conflicts during a merge (because we would have to resolve this with
every single merging-rebase).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The environment variable `HOME` is not exactly a native concept on
Windows, but Git and its scripts rely heavily on it. Make sure that it
is set (using a default that is sensible in most cases, and can easily
be overridden by setting the user-wide environment variable `HOME`
explicitly, before starting Git).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Windows executables can be configured to make use of certain Windows
features only via a so-called "manifest", i.e. a specific, embedded
resource. This manifest is also necessary to determine the Windows
version reliably.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This branch introduces support for reading the "Windows-wide" Git
configuration from `%PROGRAMDATA%\Git\config`. As these settings are
intended to be shared between *all* Git-related software, that config
file takes an even lower precedence than `$(prefix)/etc/gitconfig`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When `interactive.singlekey = true`, we react immediately to keystrokes,
even to Escape sequences (e.g. when pressing a cursor key).
The problem with Escape sequences is that we do not really know when
they are done, and as a heuristic we poll standard input for half a
second to make sure that we got all of it.
While waiting half a second is not asking for a whole lot, it can become
quite annoying over time, therefore with this patch, we read the
terminal capabilities (if available) and extract known Escape sequences
from there, then stop polling immediately when we detected that the user
pressed a key that generated such a known sequence.
This recapitulates the remaining part of b5cc003253 (add -i: ignore
terminal escape sequences, 2011-05-17).
Note: We do *not* query the terminal capabilities directly. That would
either require a lot of platform-specific code, or it would require
linking to a library such as ncurses.
Linking to a library in the built-ins is something we try very hard to
avoid (we even kicked the libcurl dependency to a non-built-in remote
helper, just to shave off a tiny fraction of a second from Git's startup
time). And the platform-specific code would be a maintenance nightmare.
Even worse: in Git for Windows' case, we would need to query MSYS2
pseudo terminals, which `git.exe` simply cannot do (because it is
intentionally *not* an MSYS2 program).
To address this, we simply spawn `infocmp -L -1` and parse its output
(which works even in Git for Windows, because that helper is included in
the end-user facing installations).
This is done only once, as in the Perl version, but it is done only when
the first Escape sequence is encountered, not upon startup of `git add
-i`; This saves on startup time, yet makes reacting to the first Escape
sequence slightly more sluggish. But it allows us to keep the
terminal-related code encapsulated in the `compat/terminal.c` file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This recapitulates part of b5cc003253 (add -i: ignore terminal escape
sequences, 2011-05-17):
add -i: ignore terminal escape sequences
On the author's terminal, the up-arrow input sequence is ^[[A, and
thus fat-fingering an up-arrow into 'git checkout -p' is quite
dangerous: git-add--interactive.perl will ignore the ^[ and [
characters and happily treat A as "discard everything".
As a band-aid fix, use Term::Cap to get all terminal capabilities.
Then use the heuristic that any capability value that starts with ^[
(i.e., \e in perl) must be a key input sequence. Finally, given an
input that starts with ^[, read more characters until we have read a
full escape sequence, then return that to the caller. We use a
timeout of 0.5 seconds on the subsequent reads to avoid getting stuck
if the user actually input a lone ^[.
Since none of the currently recognized keys start with ^[, the net
result is that the sequence as a whole will be ignored and the help
displayed.
Note that we leave part for later which uses "Term::Cap to get all
terminal capabilities", for several reasons:
1. it is actually not really necessary, as the timeout of 0.5 seconds
should be plenty sufficient to catch Escape sequences,
2. it is cleaner to keep the change to special-case Escape sequences
separate from the change that reads all terminal capabilities to
speed things up, and
3. in practice, relying on the terminal capabilities is a bit overrated,
as the information could be incomplete, or plain wrong. For example,
in this developer's tmux sessions, the terminal capabilities claim
that the "cursor up" sequence is ^[M, but the actual sequence
produced by the "cursor up" key is ^[[A.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Typically, input on the command-line is line-based. It is actually not
really easy to get single characters (or better put: keystrokes).
We provide two implementations here:
- One that handles `/dev/tty` based systems as well as native Windows.
The former uses the `tcsetattr()` function to put the terminal into
"raw mode", which allows us to read individual keystrokes, one by one.
The latter uses `stty.exe` to do the same, falling back to direct
Win32 Console access.
Thanks to the refactoring leading up to this commit, this is a single
function, with the platform-specific details hidden away in
conditionally-compiled code blocks.
- A fall-back which simply punts and reads back an entire line.
Note that the function writes the keystroke into an `strbuf` rather than
a `char`, in preparation for reading Escape sequences (e.g. when the
user hit an arrow key). This is also required for UTF-8 sequences in
case the keystroke corresponds to a non-ASCII letter.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows' Git Bash runs in MinTTY by default, which does not have
a Win32 Console instance, but uses MSYS2 pseudo terminals instead.
This is a problem, as Git for Windows does not want to use the MSYS2
emulation layer for Git itself, and therefore has no direct way to
interact with that pseudo terminal.
As a workaround, use the `stty` utility (which is included in Git for
Windows, and which *is* an MSYS2 program, so it knows how to deal with
the pseudo terminal).
Note: If Git runs in a regular CMD or PowerShell window, there *is* a
regular Win32 Console to work with. This is not a problem for the MSYS2
`stty`: it copes with this scenario just fine.
Also note that we introduce support for more bits than would be
necessary for a mere `disable_echo()` here, in preparation for the
upcoming `enable_non_canonical()` function.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We are about to introduce the function `enable_non_canonical()`, which
shares almost the complete code with `disable_echo()`.
Let's prepare for that, by refactoring out that shared code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch allows us to specify absolute paths without the drive
prefix e.g. when cloning.
Example:
C:\Users\me> git clone https://github.com/git/git \upstream-git
This will clone into a new directory C:\upstream-git, in line with how
Windows interprets absolute paths.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
From the documentation of said setting:
This boolean will enable fsync() when writing object files.
This is a total waste of time and effort on a filesystem that
orders data writes properly, but can be useful for filesystems
that do not use journalling (traditional UNIX filesystems) or
that only journal metadata and not file contents (OS X’s HFS+,
or Linux ext3 with "data=writeback").
The most common file system on Windows (NTFS) does not guarantee that
order, therefore a sudden loss of power (or any other event causing an
unclean shutdown) would cause corrupt files (i.e. files filled with
NULs). Therefore we need to change the default.
Note that the documentation makes it sound as if this causes really bad
performance. In reality, writing loose objects is something that is done
only rarely, and only a handful of files at a time.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On some older Windows versions (e.g. Windows 7), the CreateProcessW()
function does not really support spaces in its first argument,
lpApplicationName. But it supports passing NULL as lpApplicationName,
which makes it figure out the application from the (possibly quoted)
first argument of lpCommandLine.
Let's use that trick (if we are certain that the first argument matches
the executable's path) to support launching programs whose path contains
spaces.
We will abuse the test-fake-ssh.exe helper to verify that this works and
does not regress.
This fixes https://github.com/git-for-windows/git/issues/692
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
HOME initialization was historically duplicated in many different places,
including /etc/profile, launch scripts such as git-bash.vbs and gitk.cmd,
and (although slightly broken) in the git-wrapper.
Even unrelated projects such as GitExtensions and TortoiseGit need to
implement the same logic to be able to call git directly.
Initialize HOME in git's own startup code so that we can eventually retire
all the duplicate initialization code.
Signed-off-by: Karsten Blees <blees@dcon.de>
On Windows >= Vista, not having an application manifest with a
requestedExecutionLevel can cause several kinds of confusing behavior.
The first and more obvious behavior is "Installer Detection", where
Windows sometimes decides (by looking at things like the file name and
even sequences of bytes within the executable) that an executable is an
installer and should run elevated (causing the well-known popup dialog
to appear). In Git's context, subcommands such as "git patch-id" or "git
update-index" fall prey to this behavior.
The second and more confusing behavior is "File Virtualization". It
means that when files are written without having write permission, it
does not fail (as expected), but they are instead redirected to
somewhere else. When the files are read, the original contents are
returned, though, not the ones that were just written somewhere else.
Even more confusing, not all write accesses are redirected; Trying to
write to write-protected .exe files, for example, will fail instead of
redirecting.
In addition to being unwanted behavior, File Virtualization causes
dramatic slowdowns in Git (see for instance
http://code.google.com/p/msysgit/issues/detail?id=320).
There are two ways to prevent those two behaviors: Either you embed an
application manifest within all your executables, or you add an external
manifest (a file with the same name followed by .manifest) to all your
executables. Since Git's builtins are hardlinked (or copied), it is
simpler and more robust to embed a manifest.
A recent enough MSVC compiler should already embed a working internal
manifest, but for MinGW you have to do so by hand.
Very lightly tested on Wine, where like on Windows XP it should not make
any difference.
References:
- New UAC Technologies for Windows Vista
http://msdn.microsoft.com/en-us/library/bb756960.aspx
- Create and Embed an Application Manifest (UAC)
http://msdn.microsoft.com/en-us/library/bb756929.aspx
[js: simplified the embedding dramatically by reusing Git for Windows'
existing Windows resource file, removed the optional (and dubious)
processorArchitecture attribute of the manifest's assemblyIdentity
section.]
Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
For many Win32 functions, there actually exist two variants: one with
the `A` suffix that takes ANSI parameters (`char *` or `const char *`)
and one with the `W` suffix that takes Unicode parameters (`wchar_t *`
or `const wchar_t *`).
Let's be precise what we want to use.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Between the libgit2 and the Git for Windows project, there has been a
discussion how we could share Git configuration to avoid duplication (or
worse: skew).
Earlier, libgit2 was nice enough to just re-use Git for Windows'
C:\Program Files (x86)\Git\etc\gitconfig
but with the upcoming Git for Windows 2.x, there would be more paths to
search, as we will have 64-bit and 32-bit versions, and the
corresponding config files will be in %PROGRAMFILES%\Git\mingw64\etc and
...\mingw32\etc, respectively.
Worse: there are portable Git for Windows versions out there which live
in totally unrelated directories, still.
Therefore we came to a consensus to use `%PROGRAMDATA%\Git\config` as the
location for shared Git settings that are of wider interest than just Git
for Windows.
Of course, the configuration in `%PROGRAMDATA%\Git\config` has the
widest reach, therefore it must take the lowest precedence, i.e. Git for
Windows can still override settings in its `etc/gitconfig` file.
Helped-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The return value of that function is 0 both for variables that are
unset, as well as for variables whose values are empty. To discern those
two cases, one has to call `GetLastError()`, whose return value is
`ERROR_ENVVAR_NOT_FOUND` and `ERROR_SUCCESS`, respectively.
Except that it is not actually set to `ERROR_SUCCESS` in the latter
case, apparently, but the last error value seems to be simply unchanged.
To work around this, let's just re-set the last error value just before
inspecting the environment variable.
This fixes a problem that triggers failures in t3301-notes.sh (where we
try to override config settings by passing empty values for certain
environment variables).
This problem is hidden in the MINGW build by the fact that older
MSVC runtimes (such as the one used by MINGW builds) have a `calloc()`
that re-sets the last error value in case of success, while newer
runtimes set the error value only if `NULL` is returned by that
function.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We frequently build Git using the `DEVELOPER=1` make setting as a
shortcut to enable all kinds of more stringent compiler warnings.
Those compiler warnings are relatively specific to GCC, though, so let's
try our best to translate them to the equivalent options to pass to MS
Visual C++'s `cl.exe`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
To build with MSVC, we "translate" GCC options to MSVC options, and part
of those options refer to the libraries to link into the final
executable. Currently, this part looks somewhat like this on Windows:
-lcurl -lnghttp2 -lidn2 -lssl -lcrypto -lssl -lcrypto -lgdi32
-lcrypt32 -lwldap32 -lz -lws2_32 -lexpat
Some of those are direct dependencies (such as curl and ssl) and others
are indirect (nghttp2 and idn2, for example, are dependencies of curl,
but need to be linked in for reasons).
We already handle the direct dependencies, e.g. `-liconv` is already
handled as adding `libiconv.lib` to the list of libraries to link
against.
Let's just ignore the remaining `-l*` options so that MSVC does not have
to warn us that it ignored e.g. the `/lnghttp2` option. We do that by
extending the clause that already "eats" the `-R*` options to also eat
the `-l*` options.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
MSVC would complain thusly:
C4200: nonstandard extension used: zero-sized array in struct/union
Let's just use the `FLEX_ARRAY` constant that we introduced for exactly
this type of scenario.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
