Since b814da8 (pull: add pull.ff configuration, 2014-01-15), running
git-pull with the configuration pull.ff=false or pull.ff=only is
equivalent to passing --no-ff and --ff-only to git-merge. However, if
pull.ff=true, no switch is passed to git-merge. This leads to the
confusing behavior where pull.ff=false or pull.ff=only is able to
override merge.ff, while pull.ff=true is unable to.
Fix this by adding the --ff switch if pull.ff=true, and add a test to
catch future regressions.
Furthermore, clarify in the documentation that pull.ff overrides
merge.ff.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since efb779f (merge, pull: add '--(no-)log' command line option,
2008-04-06) git-pull supported the (--no-)log switch and would pass it
to git-merge.
96e9420 (merge: Make '--log' an integer option for number of shortlog
entries, 2010-09-08) implemented support for the --log=<n> switch, which
would explicitly set the number of shortlog entries. However, git-pull
does not recognize this option, and will instead pass it to git-fetch,
leading to "unknown option" errors.
Fix this by matching --log=* in addition to --log and --no-log.
Implement a test for this use case.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
a8c9bef (pull: improve advice for unconfigured error case, 2009-10-05)
fully established the current advices given by git-pull for the
different cases where git-fetch will not have anything marked for merge:
1. We fetched from a specific remote, and a refspec was given, but it
ended up not fetching anything. This is usually because the user
provided a wildcard refspec which had no matches on the remote end.
2. We fetched from a non-default remote, but didn't specify a branch to
merge. We can't use the configured one because it applies to the
default remote, and thus the user must specify the branches to merge.
3. We fetched from the branch's or repo's default remote, but:
a. We are not on a branch, so there will never be a configured branch
to merge with.
b. We are on a branch, but there is no configured branch to merge
with.
4. We fetched from the branch's or repo's default remote, but the
configured branch to merge didn't get fetched (either it doesn't
exist, or wasn't part of the configured fetch refspec)
Implement tests for the above 5 cases to ensure that the correct code
paths are triggered for each of these cases.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests in t5520 used the following to test the contents of files:
test `cat file` = expected
or
test $(cat file) = expected
These 2 forms, however, will be affected by field splitting and,
depending on the value of $IFS, may be split into multiple arguments,
making the test fail in mysterious ways.
Replace the above 2 forms with:
test "$(cat file)" = expected
as quoting the command substitution will prevent field splitting.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git add` of an empty file with a filter pops complaints from
`copy_fd` about a bad file descriptor.
This traces back to these lines in sha1_file.c:index_core:
if (!size) {
ret = index_mem(sha1, NULL, size, type, path, flags);
The problem here is that content to be added to the index can be
supplied from an fd, or from a memory buffer, or from a pathname. This
call is supplying a NULL buffer pointer and a zero size.
Downstream logic takes the complete absence of a buffer to mean the
data is to be found elsewhere -- for instance, these, from convert.c:
if (params->src) {
write_err = (write_in_full(child_process.in, params->src, params->size) < 0);
} else {
write_err = copy_fd(params->fd, child_process.in);
}
~If there's a buffer, write from that, otherwise the data must be coming
from an open fd.~
Perfectly reasonable logic in a routine that's going to write from
either a buffer or an fd.
So change `index_core` to supply an empty buffer when indexing an empty
file.
There's a patch out there that instead changes the logic quoted above to
take a `-1` fd to mean "use the buffer", but it seems to me that the
distinction between a missing buffer and an empty one carries intrinsic
semantics, where the logic change is adapting the code to handle
incorrect arguments.
Signed-off-by: Jim Hill <gjthill@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed for getcommitlines to work properly when a language
translation is being used.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
If the current view is the "Command line" view, show the command line
arguments instead of the view name.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This adds menu entries to two of the right-click menus:
- 'Copy path' in the file list
- 'Copy branch name' on a branch in the commit list
Signed-off-by: Michael Rappazzo <rappazzo@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This is a better fix for 8d849957d8.
This new fix makes the strings "Sorry, gitk cannot run..." and "OK"
translatable and the string "mc" not translatable. It will take effect
the next time `make update-po` is run.
msgcat is now imported before the Tcl/Tk version check so that the mc
function is available even if the version check fails. This should not
be a problem because msgcat and ::msgcat::mc were officially added in
Tcl 8.1 (released April 29, 1999) and we are not trying to support
versions of Tcl older than that.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
With the new mingw_stat() implementation, do_lstat() is only called from
mingw_lstat() (with follow == 0). Remove the extra function and the old
mingw_stat()-specific (follow == 1) logic.
Signed-off-by: Karsten Blees <blees@dcon.de>
With respect to symlinks, the current stat() implementation is almost the
same as lstat(): except for the file type (st_mode & S_IFMT), it returns
information about the link rather than the target.
Implement stat by opening the file with as little permissions as possible
and calling GetFileInformationByHandle on it. This way, all link resoltion
is handled by the Windows file system layer.
If symlinks are disabled, use lstat() as before, but fail with ELOOP if a
symlink would have to be resolved.
Signed-off-by: Karsten Blees <blees@dcon.de>
When we die() in http-backend, we call a custom handler that
writes an HTTP 500 response to stdout, then reports the
error to stderr. Our routines for writing out the HTTP
response may themselves die, leading to us entering die()
again.
When it was originally written, that was OK; our custom
handler keeps a variable to notice this and does not
recurse. However, since cd163d4 (usage.c: detect recursion
in die routines and bail out immediately, 2012-11-14), the
main die() implementation detects recursion before we even
get to our custom handler, and bails without printing
anything useful.
We can handle this case by doing two things:
1. Installing a custom die_is_recursing handler that
allows us to enter up to one level of recursion. Only
the first call to our custom handler will try to write
out the error response. So if we die again, that is OK.
If we end up dying more than that, it is a sign that we
are in an infinite recursion.
2. Reporting the error to stderr before trying to write
out the HTTP response. In the current code, if we do
die() trying to write out the response, we'll exit
immediately from this second die(), and never get a
chance to output the original error (which is almost
certainly the more interesting one; the second die is
just going to be along the lines of "I tried to write
to stdout but it was closed").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, there is only one attempt to acquire any lockfile, and if
the lock is held by another process, the locking attempt fails
immediately.
This is not such a limitation for loose reference files. First, they
don't take long to rewrite. Second, most reference updates have a
known "old" value, so if another process is updating a reference at
the same moment that we are trying to lock it, then probably the
expected "old" value will not longer be valid, and the update will
fail anyway.
But these arguments do not hold for packed-refs:
* The packed-refs file can be large and take significant time to
rewrite.
* Many references are stored in a single packed-refs file, so it could
be that the other process was changing a different reference than
the one that we are interested in.
Therefore, it is much more likely for there to be spurious lock
conflicts in connection to the packed-refs file, resulting in
unnecessary command failures.
So, if the first attempt to lock the packed-refs file fails, continue
retrying for a configurable length of time before giving up. The
default timeout is 1 second.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, there is only one attempt to lock a file. If it fails, the
whole operation fails.
But it might sometimes be advantageous to try acquiring a file lock a
few times before giving up. So add a new function,
hold_lock_file_for_update_timeout(), that allows a timeout to be
specified. Make hold_lock_file_for_update() a thin wrapper around the
new function.
If timeout_ms is positive, then retry for at least that many
milliseconds to acquire the lock. On each failed attempt, use select()
to wait for a backoff time that increases quadratically (capped at 1
second) and has a random component to prevent two processes from
getting synchronized. If timeout_ms is negative, retry indefinitely.
In a moment we will switch to using the new function when locking
packed-refs.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you run "git rerere forget foo" in a repository that does
not have rerere enabled, git hits an internal error:
$ git init -q
$ git rerere forget foo
fatal: BUG: attempt to commit unlocked object
The problem is that setup_rerere() will not actually take
the lock if the rerere system is disabled. We should notice
this and return early. We can return with a success code
here, because we know there is nothing to forget.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 441ed41 ("git pull --tags": error out with a better message.,
2007-12-28), git pull --tags would print a different error message if
git-fetch did not return any merge candidates:
It doesn't make sense to pull all tags; you probably meant:
git fetch --tags
This is because at that time, git-fetch --tags would override any
configured refspecs, and thus there would be no merge candidates. The
error message was thus introduced to prevent confusion.
However, since c5a84e9 (fetch --tags: fetch tags *in addition to*
other stuff, 2013-10-30), git fetch --tags would fetch tags in addition
to any configured refspecs. Hence, if any no merge candidates situation
occurs, it is not because --tags was set. As such, this special error
message is now irrelevant.
To prevent confusion, remove this error message.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The former seems to just be syntactic sugar for the latter.
And as it's sugar that AsciiDoctor doesn't understand, it
would be nice to avoid it. Since there are only two spots,
and the resulting source is not significantly harder to
read, it's worth doing.
Note that this does slightly affect the generated HTML (it
has an extra newline), but the rendered result for both HTML
and docbook should be the same (since the newline is not
syntactically significant there).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use msysGit's `git-wrapper` instead of the builtins. This works around
two issues:
- when the file system does not allow hard links, we would waste over
800 megabyte by having 109 copies of a multi-megabyte executable
- even when the file system allows hard links, the Windows Explorer
counts the disk usage as if it did not. Many users complained about
Git for Windows using too much space (when it actually did not). We
can easily avoid those user complaints by merging this branch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This was originally 'pull request #330 from ethomson/poll_inftim' in
msysgit/git.
poll: honor the timeout on Win32
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These fixes were necessary for Sverre Rabbelier's remote-hg to work,
but for some magic reason they are not necessary for the current
remote-hg. Makes you wonder how that one gets away with it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Between the libgit2 and the Git for Windows project, there has been a
discussion how we could share Git configuration to avoid duplication (or
worse: skew).
Earlier, libgit2 was nice enough to just re-use Git for Windows'
C:\Program Files (x86)\Git\etc\gitconfig
but with the upcoming Git for Windows 2.x, there would be more paths to
search, as we will have 64-bit and 32-bit versions, and the
corresponding config files will be in %PROGRAMFILES%\Git\mingw64\etc and
...\mingw32\etc, respectively.
Therefore we came to a consensus to use %PROGRAMDATA%\Git as the
location for Git-specific files that are of wider interest than just Git
for Windows.
On XP, there is no %PROGRAMDATA%, therefore we need to use
"%ALLUSERSPROFILE%\Application Data\Git\config" in those setups.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Using different code pages for console input (SetConsoleCP()) and console
output (SetConsoleOutputCP()) doesn't make much sense and may be hazardous
for native Windows programs.
Git uses UTF-8 internally, so it actually needs 'SetConsoleCP(CP_UTF8)'
rather than 'SetConsoleCP(GetACP())'. However, ReadFile() / ReadConsoleA()
are broken with CP_UTF8 (and thus any higher level APIs such as fgetc(),
getchar() etc.). Unicode-aware console input would have to be implemented
via mingw_* wrappers using ReadConsoleW(). As Git typically launches an
editor for anything more complex than ASCII-only, yes/no-style questions,
this is currently not a problem.
Drop 'SetConsoleCP()' from the git-wrapper, so that input and output code
pages stay in sync.
Signed-off-by: Karsten Blees <blees@dcon.de>
When we fall back to starting the Git Bash in the regular Windows
console, we need to show said console's window... So let's introduce yet
another configuration knob for use via string resources.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With a recent change in Cygwin (which is the basis of the msys2-runtime),
a GUI process desiring to launch an MSys2 executable needs to allocate a
console for the new process (otherwise the process will just hang on
Windows XP). _Git Bash_ is such a GUI process.
While at it, use correct handles when inheriting the stdin/stdout/stderr
handles: `GetStdHandle()` returns NULL for invalid handles, but the
STARTUPINFO must specify `INVALID_HANDLE_VALUE` instead.
Originally, the hope was that only this `NULL` => `INVALID_HANDLE_VALUE`
conversion would be required to fix the Windows XP issue mentioned above
(extensive debugging revealed that starting _Git Bash_ on Windows XP would
yield invalid handles for `stdin` and `stderr`, but *not* for `stdout`).
However, while _Git Bash_ eventually showed a `mintty` when not allocating
a new console, it took around one second to show it, and several seconds
to close it. So let's just include both fixes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With the resource-driven command-line configuration, we introduced the
option to ensure that only the PATH environment variable is edited only
minimally, i.e. only /cmd/ is added (as appropriate for _Git CMD_).
We are about to add another option, so let's refactor the equivalent of
Git's `strip_prefix()` function; It is not *quite* the same because we
have to `memmove()` the remainder to the beginning of the buffer.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
git-wrapper fails to initialize HOME correctly if $HOMEDRIVE$HOMEPATH
points to a disconnected network drive.
Check if the directory exists before using $HOMEDRIVE$HOMEPATH.
Signed-off-by: Karsten Blees <blees@dcon.de>
This change accompanies the `--no-cd` option when configured via
resources. It is required to support `Git Bash Here`: when
right-clicking an icon in the Explorer to start a Bash, the working
directory is actually the directory that is displayed in the Explorer.
That means if the clicked icon actually refers to a directory, the
working directory would be its *parent* directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
To avoid that ugly Console window when calling \cmd\git.exe gui...
To avoid confusion with builtins, we need to move the code block
handling gitk (and now git-gui, too) to intercept before git-gui is
mistaken for a builtin.
Unfortunately, git-gui is in libexec/git-core/ while gitk is in bin/,
therefore we need slightly more adjustments than just moving and
augmenting the gitk case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When *Git for Windows* is installed into a directory that has spaces in
it, e.g. `C:\Program Files\Git`, the `git-wrapper` appends this directory
unquoted when fixing up the command line. To resolve this, just quote the
provided `execpath`.
Signed-off-by: nalla <nalla@hamal.uberspace.de>
The idea of having the Git wrapper in the /cmd/ directory is to allow
adding only a *tiny* set of executables to the search path, to allow
minimal interference with other software applications. It is quite
likely, for example, that other software applications require their own
version of zlib1.dll and would not be overly happy to find the version
Git for Windows ships.
The /cmd/ directory also gives us the opportunity to let the Git wrapper
handle the `gitk` script. It is a Tcl/Tk script that is not recognized
by Windows, therefore calling `gitk` in `cmd.exe` would not work, even
if we add all of Git for Windows' bin/ directories.
So let's use the /cmd/ directory instead of adding /mingw??/bin/ and
/usr/bin/ to the PATH when launching Git CMD.
The way we implemented Git CMD is to embed the appropriate command line
as string resource into a copy of the Git wrapper. Therefore we extended
that syntax to allow for configuring a minimal search path.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We recently added the ability to configure copies of the Git wrapper to
launch custom command-lines, configured via plain old Windows resources.
The main user is Git for Windows' `git-bash.exe`, of course. When the
user double-clicks the `git bash` icon, it makes sense to start the Bash
in the user's home directory.
Third-party software, such as TortoiseGit or GitHub for Windows, may
want to start the Git Bash in another directory, though.
Now, when third-party software wants to call Git, they already have to
construct a command-line, and can easily pass a command-line option
`--no-cd` (which this commit introduces), and since that option is not
available when the user double-clicks an icon on the Desktop or in the
Explorer, let's keep the default to switch to the home directory if the
`--no-cd` flag was not passed along.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When we rewrite the command-line to call the *real* Git, we want to skip
the first command-line parameter. The previous code worked in most
circumstances, but was a bit fragile because it assumed that no fancy
quoting would take place.
In the next commit, we will want to have the option to skip more than
just one command-line parameter, so we have to be much more careful with
the command-line handling.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In the meantime, Git for Windows learned to handle those subcommands
quite well itself; There is no longer a need to special-case them in the
wrapper.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
