A fix for calling `vim` in Windows Terminal caused a regression and was
reverted. We partially un-revert this, to get the fix again.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This patch introduces support to set special NTFS attributes that are
interpreted by the Windows Subsystem for Linux as file mode bits, UID
and GID.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With this patch, Git for Windows works as intended on mounted APFS
volumes (where renaming read-only files would fail).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These are Git for Windows' Git GUI and gitk patches. We will have to
decide at some point what to do about them, but that's a little lower
priority (as Git GUI seems to be unmaintained for the time being, and
the gitk maintainer keeps a very low profile on the Git mailing list,
too).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is the recommended way on GitHub to describe policies revolving around
security issues and about supported versions.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reintroduce the 'core.useBuiltinFSMonitor' config setting (originally added
in 0a756b2a25 (fsmonitor: config settings are repository-specific,
2021-03-05)) after its removal from the upstream version of FSMonitor.
Upstream, the 'core.useBuiltinFSMonitor' setting was rendered obsolete by
"overloading" the 'core.fsmonitor' setting to take a boolean value. However,
several applications (e.g., 'scalar') utilize the original config setting,
so it should be preserved for a deprecation period before complete removal:
* if 'core.fsmonitor' is a boolean, the user is correctly using the new
config syntax; do not use 'core.useBuiltinFSMonitor'.
* if 'core.fsmonitor' is unspecified, use 'core.useBuiltinFSMonitor'.
* if 'core.fsmonitor' is a path, override and use the builtin FSMonitor if
'core.useBuiltinFSMonitor' is 'true'; otherwise, use the FSMonitor hook
indicated by the path.
Additionally, for this deprecation period, advise users to switch to using
'core.fsmonitor' to specify their use of the builtin FSMonitor.
Signed-off-by: Victoria Dye <vdye@github.com>
Git documentation refers to $HOME and $XDG_CONFIG_HOME often, but does not specify how or where these values come from on Windows where neither is set by default. The new documentation reflects the behavior of setup_windows_environment() in compat/mingw.c.
Signed-off-by: Alejandro Barreto <alejandro.barreto@ni.com>
Rather than using private IFTTT Applets that send mails to this
maintainer whenever a new version of a Git for Windows component was
released, let's use the power of GitHub workflows to make this process
publicly visible.
This workflow monitors the Atom/RSS feeds, and opens a ticket whenever a
new version was released.
Note: Bash sometimes releases multiple patched versions within a few
minutes of each other (i.e. 5.1p1 through 5.1p4, 5.0p15 and 5.0p16). The
MSYS2 runtime also has a similar system. We can address those patches as
a group, so we shouldn't get multiple issues about them.
Note further: We're not acting on newlib releases, OpenSSL alphas, Perl
release candidates or non-stable Perl releases. There's no need to open
issues about them.
Co-authored-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows accepts pull requests; Core Git does not. Therefore we
need to adjust the template (because it only matches core Git's
project management style, not ours).
Also: direct Git for Windows enhancements to their contributions page,
space out the text for easy reading, and clarify that the mailing list
is plain text, not HTML.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Getting started contributing to Git can be difficult on a Windows
machine. CONTRIBUTING.md contains a guide to getting started, including
detailed steps for setting up build tools, running tests, and
submitting patches to upstream.
[includes an example by Pratik Karki how to submit v2, v3, v4, etc.]
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
The Git project followed suite and added their Code of Conduct, based on
the Contributors' Covenant v1.4.
We edit it slightly to reflect Git for Windows' particulars.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The Git for Windows project has grown quite complex over the years,
certainly much more complex than during the first years where the
`msysgit.git` repository was abusing Git for package management purposes
and the `git/git` fork was called `4msysgit.git`.
Let's describe the status quo in a thorough way.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The `--stdin` option was a well-established paradigm in other commands,
therefore we implemented it in `git reset` for use by Visual Studio.
Unfortunately, upstream Git decided that it is time to introduce
`--pathspec-from-file` instead.
To keep backwards-compatibility for some grace period, we therefore
reinstate the `--stdin` option on top of the `--pathspec-from-file`
option, but mark it firmly as deprecated.
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In e3f7e01b50 (Revert "editor: save and reset terminal after calling
EDITOR", 2021-11-22), we reverted the commit wholesale where the
terminal state would be saved and restored before/after calling an
editor.
The reverted commit was intended to fix a problem with Windows Terminal
where simply calling `vi` would cause problems afterwards.
To fix the problem addressed by the revert, but _still_ keep the problem
with Windows Terminal fixed, let's revert the revert, with a twist: we
restrict the save/restore _specifically_ to the case where `vi` (or
`vim`) is called, and do not do the same for any other editor.
This should still catch the majority of the cases, and will bridge the
time until the original patch is re-done in a way that addresses all
concerns.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The `xutftowcs_path` function canonicalizes absolute paths using GetFullPathNameW.
This canonicalization may change the length of the string (e.g. getting rid of \.\),
which breaks callers that pass the template string in a strbuf and expect the
length of the string to remain the same.
In my particular case, the tmp-objdir code is passing a strbuf to mkdtemp and is
breaking since the strbuf.len is no longer synchronized with strlen(strbuf.buf).
Signed-off-by: Neeraj K. Singh <neerajsi@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Previously, we did not install any handler for Ctrl+C, but now we really
want to because the MSYS2 runtime learned the trick to call the
ConsoleCtrlHandler when Ctrl+C was pressed.
With this, hitting Ctrl+C while `git log` is running will only terminate
the Git process, but not the pager. This finally matches the behavior on
Linux and on macOS.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The TerminateProcess() function does not actually leave the child
processes any chance to perform any cleanup operations. This is bad
insofar as Git itself expects its signal handlers to run.
A symptom is e.g. a left-behind .lock file that would not be left behind
if the same operation was run, say, on Linux.
To remedy this situation, we use an obscure trick: we inject a thread
into the process that needs to be killed and to let that thread run the
ExitProcess() function with the desired exit status. Thanks J Wyman for
describing this trick.
The advantage is that the ExitProcess() function lets the atexit
handlers run. While this is still different from what Git expects (i.e.
running a signal handler), in practice Git sets up signal handlers and
atexit handlers that call the same code to clean up after itself.
In case that the gentle method to terminate the process failed, we still
fall back to calling TerminateProcess(), but in that case we now also
make sure that processes spawned by the spawned process are terminated;
TerminateProcess() does not give the spawned process a chance to do so
itself.
Please note that this change only affects how Git for Windows tries to
terminate processes spawned by Git's own executables. Third-party
software that *calls* Git and wants to terminate it *still* need to make
sure to imitate this gentle method, otherwise this patch will not have
any effect.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The Windows Subsystem for Linux (WSL) version 2 allows to use `chmod` on
NTFS volumes provided that they are mounted with metadata enabled (see
https://devblogs.microsoft.com/commandline/chmod-chown-wsl-improvements/
for details), for example:
$ chmod 0755 /mnt/d/test/a.sh
In order to facilitate better collaboration between the Windows
version of Git and the WSL version of Git, we can make the Windows
version of Git also support reading and writing NTFS file modes
in a manner compatible with WSL.
Since this slightly slows down operations where lots of files are
created (such as an initial checkout), this feature is only enabled when
`core.WSLCompat` is set to true. Note that you also have to set
`core.fileMode=true` in repositories that have been initialized without
enabling WSL compatibility.
There are several ways to enable metadata loading for NTFS volumes
in WSL, one of which is to modify `/etc/wsl.conf` by adding:
```
[automount]
enabled = true
options = "metadata,umask=027,fmask=117"
```
And reboot WSL.
It can also be enabled temporarily by this incantation:
$ sudo umount /mnt/c &&
sudo mount -t drvfs C: /mnt/c -o metadata,uid=1000,gid=1000,umask=22,fmask=111
It's important to note that this modification is compatible with, but
does not depend on WSL. The helper functions in this commit can operate
independently and functions normally on devices where WSL is not
installed or properly configured.
Signed-off-by: xungeng li <xungeng@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The Makefile target `install-mingit-test-artifacts` simply copies stuff
and things directly into a MinGit directory, including an init.bat
script to set everything up so that the tests can be run in a cmd
window.
Sadly, Git's test suite still relies on a Perl interpreter even if
compiled with NO_PERL=YesPlease. We punt for now, installing a small
script into /usr/bin/perl that hands off to an existing Perl of a Git
for Windows SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, the current working directory is pretty much guaranteed to
contain a colon. If we feed that path to CVS, it mistakes it for a
separator between host and port, though.
This has not been a problem so far because Git for Windows uses MSYS2's
Bash using a POSIX emulation layer that also pretends that the current
directory is a Unix path (at least as long as we're in a shell script).
However, that is rather limiting, as Git for Windows also explores other
ports of other Unix shells. One of those is BusyBox-w32's ash, which is
a native port (i.e. *not* using any POSIX emulation layer, and certainly
not emulating Unix paths).
So let's just detect if there is a colon in $PWD and punt in that case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows uses MSYS2's Bash to run the test suite, which comes
with benefits but also at a heavy price: on the plus side, MSYS2's
POSIX emulation layer allows us to continue pretending that we are on a
Unix system, e.g. use Unix paths instead of Windows ones, yet this is
bought at a rather noticeable performance penalty.
There *are* some more native ports of Unix shells out there, though,
most notably BusyBox-w32's ash. These native ports do not use any POSIX
emulation layer (or at most a *very* thin one, choosing to avoid
features such as fork() that are expensive to emulate on Windows), and
they use native Windows paths (usually with forward slashes instead of
backslashes, which is perfectly legal in almost all use cases).
And here comes the problem: with a $PWD looking like, say,
C:/git-sdk-64/usr/src/git/t/trash directory.t5813-proto-disable-ssh
Git's test scripts get quite a bit confused, as their assumptions have
been shattered. Not only does this path contain a colon (oh no!), it
also does not start with a slash.
This is a problem e.g. when constructing a URL as t5813 does it:
ssh://remote$PWD. Not only is it impossible to separate the "host" from
the path with a $PWD as above, even prefixing $PWD by a slash won't
work, as /C:/git-sdk-64/... is not a valid path.
As a workaround, detect when $PWD does not start with a slash on
Windows, and simply strip the drive prefix, using an obscure feature of
Windows paths: if an absolute Windows path starts with a slash, it is
implicitly prefixed by the drive prefix of the current directory. As we
are talking about the current directory here, anyway, that strategy
works.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When t5605 tries to verify that files are hardlinked (or that they are
not), it uses the `-links` option of the `find` utility.
BusyBox' implementation does not support that option, and BusyBox-w32's
lstat() does not even report the number of hard links correctly (for
performance reasons).
So let's just switch to a different method that actually works on
Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
While it may seem super convenient to some old Unix hands to simpy
require Perl to be available when running the test suite, this is a
major hassle on Windows, where we want to verify that Perl is not,
actually, required in a NO_PERL build.
As a super ugly workaround, we "install" a script into /usr/bin/perl
reading like this:
#!/bin/sh
# We'd much rather avoid requiring Perl altogether when testing
# an installed Git. Oh well, that's why we cannot have nice
# things.
exec c:/git-sdk-64/usr/bin/perl.exe "$@"
The problem with that is that BusyBox assumes that the #! line in a
script refers to an executable, not to a script. So when it encounters
the line #!/usr/bin/perl in t5532's proxy-get-cmd, it barfs.
Let's help this situation by simply executing the Perl script with the
"interpreter" specified explicitly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
At some stage, t5003-archive-zip wants to add a file that is not ASCII.
To that end, it uses /bin/sh. But that file may actually not exist (it
is too easy to forget that not all the world is Unix/Linux...)! Besides,
we already have perfectly fine binary files intended for use solely by
the tests. So let's use one of them instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When running with BusyBox, we will want to avoid calling executables on
the PATH that are implemented in BusyBox itself.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The -W option is only understood by MSYS2 Bash's pwd command. We already
make sure to override `pwd` by `builtin pwd -W` for MINGW, so let's not
double the effort here.
This will also help when switching the shell to another one (such as
BusyBox' ash) whose pwd does *not* understand the -W option.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Traditionally, Git for Windows' SDK uses Bash as its default shell.
However, other Unix shells are available, too. Most notably, the Win32
port of BusyBox comes with `ash` whose `pwd` command already prints
Windows paths as Git for Windows wants them, while there is not even a
`builtin` command.
Therefore, let's be careful not to override `pwd` unless we know that
the `builtin` command is available.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
BusyBox-w32 is a true Win32 application, i.e. it does not come with a
POSIX emulation layer.
That also means that it does *not* use the Unix convention of separating
the entries in the PATH variable using colons, but semicolons.
However, there are also BusyBox ports to Windows which use a POSIX
emulation layer such as Cygwin's or MSYS2's runtime, i.e. using colons
as PATH separators.
As a tell-tale, let's use the presence of semicolons in the PATH
variable: on Unix, it is highly unlikely that it contains semicolons,
and on Windows (without POSIX emulation), it is virtually guaranteed, as
everybody should have both $SYSTEMROOT and $SYSTEMROOT/system32 in their
PATH.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The idea is to allow running the test suite on MinGit with BusyBox
installed in /mingw64/bin/sh.exe. In that case, we will want to exclude
sort & find (and other Unix utilities) from being bundled.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We already have a directory where we store files intended for use by
multiple test scripts. The same directory is a better home for the
test-binary-*.png files than t/.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
To verify that the symlink is resolved correctly, we use the fact that
`git.exe` is a native Win32 program, and that `git.exe config -f <path>`
therefore uses the native symlink resolution.
Signed-off-by: Bert Belder <bertbelder@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
At least on _some_ APFS network shares, Git fails to rename the object
files because they are marked as read-only, because that has the effect
of setting the uchg flag on APFS, which then means the file can't be
renamed or deleted.
To work around that, when a rename failed, and the read-only flag is
set, try to turn it off and on again.
This fixes https://github.com/git-for-windows/git/issues/4482
Signed-off-by: David Lomas <dl3@pale-eds.co.uk>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
... even if they may look like them.
As looking up the target of the "symbolic link" (just to see whether it
starts with `/ContainerMappedDirectories/`) is pretty expensive, we
do it when we can be *really* sure that there is a possibility that this
might be the case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: JiSeop Moon <zcube@zcube.kr>
On Windows, symbolic links have a type: a "file symlink" must point at
a file, and a "directory symlink" must point at a directory. If the
type of symlink does not match its target, it doesn't work.
Git does not record the type of symlink in the index or in a tree. On
checkout it'll guess the type, which only works if the target exists
at the time the symlink is created. This may often not be the case,
for example when the link points at a directory inside a submodule.
By specifying `symlink=file` or `symlink=dir` the user can specify what
type of symlink Git should create, so Git doesn't have to rely on
unreliable heuristics.
Signed-off-by: Bert Belder <bertbelder@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
