In t14013, we have various different tests that verify whether certain
diffs are generated as expected. As much of the logic is the same across
many of the tests we some common code in there that generates the actual
test cases for us.
As some diffs are more special than others depending on the command line
parameters passed to git-diff(1), these tests need to adapt behaviour to
the specific test case sometimes. This is done via colon-prefixed magic
commands, of which we currently know "failure" and "noellipses". The
logic to parse this magic is a bit convoluted though and hard to grasp,
also due to the rather unnecessary nesting.
Un-nest the cases so that it becomes a bit more straightfoward. The
logic is further simplified by removing support for the "failure" magic,
which is not actually used anymore.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests in t3310 exercises whether the special references
`NOTES_MERGE_PARTIAL` and `NOTES_MERGE_REF` exist as expected when the
notes subsystem runs into a merge conflict. This is done by checking
on-disk data structures directly though instead of asking the reference
backend.
Refactor the test to use git-rev-parse(1) instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests for `git reflog delete --updateref` are currently marked to
only run with the reffiles backend. There is no inherent reason that
this should be the case other than the fact that the setup messes with
the on-disk reflogs directly.
Refactor the test to stop doing so and drop the REFFILES prerequisite.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests in t1410 is marked to be specific to the files
reference backend, which is because we create a reflog manually by
creating the respective file. Refactor the test to instead use our
`test-tool ref-store` helper to create the reflog so that it works with
other reference backends, as well.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests in t1401 asserts that we can create a symref from a
symbolic reference to a top-level reference, which is done by linking
from `refs/heads/top-level` to `FETCH_HEAD`. But `FETCH_HEAD` is not a
proper reference and doesn't even follow the loose reference format, so
it is not a good candidate for the logic under test.
Refactor the test to use `ORIG_HEAD` instead of `FETCH_HEAD`. This also
works with other backends than the reffiles one.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a bunch of tests in t1400 that check whether we correctly read
reflog entries. These tests create the reflog by manually writing to the
respective loose file, which makes them specific to the files backend.
But while some of them do indeed exercise very specific edge cases in
the reffiles backend, most of the tests exercise generic functionality
that should be common to all backends.
Unfortunately, we can't easily adapt all of the tests to work with all
backends. Instead, split out the reffile-specific tests from the ones
that should work with all backends and refactor the generic ones to not
write to the on-disk files directly anymore.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two of our tests in t0410 verify whether partial clones end up with the
correct repository format version and extensions. These checks require
the reffiles backend because every other backend would by necessity bump
the repository format version to be at least 1.
Mark the tests accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows 10 version 1511 (also known as Anniversary Update), according to
https://learn.microsoft.com/en-us/windows/console/console-virtual-terminal-sequences
introduced native support for ANSI sequence processing. This allows
using colors from the entire 24-bit color range.
All we need to do is test whether the console's "virtual processing
support" can be enabled. If it can, we do not even need to start the
`console_thread` to handle ANSI sequences.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Continue the work of 12909b6b8a (i18n: turn "options are incompatible"
into "cannot be used together", 2022-01-05) and a699367bb8 (i18n:
factorize more 'incompatible options' messages, 2022-01-31) to use the
same parameterized error message for reporting incompatible command line
options. This reduces the number of strings to translate and makes the
UI slightly more consistent.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Releasing strbuf and string_list just before exiting is not strictly
necessary, but it gets rid of false positives reported by leak checkers,
which can then be more easily used to show that the column-printing
machinery behind print_columns() are free of leaks.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The replay command is able to replay multiple branches but when some of
them are based on other replayed branches, their commit should be
replayed onto already replayed commits.
For this purpose, let's store the replayed commit and its original
commit in a key value store, so that we can easily find and reuse a
replayed commit instead of the original one.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's add a `--contained` option that can be used along with
`--onto` to rebase all the branches contained in the <revision-range>
argument.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is already a 'rebase' mode with `--onto`. Let's add an 'advance' or
'cherry-pick' mode with `--advance`. This new mode will make the target
branch advance as we replay commits onto it.
The replayed commits should have a single tip, so that it's clear where
the target branch should be advanced. If they have more than one tip,
this new mode will error out.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of the fixed "<oldbase> <branch>" arguments, the replay
command now accepts "<revision-range>..." arguments in a similar
way as many other Git commands. This makes its interface more
standard and more flexible.
This also enables many revision related options accepted and
eaten by setup_revisions(). If the replay command was a high level
one or had a high level mode, it would make sense to restrict some
of the possible options, like those generating non-contiguous
history, as they could be confusing for most users.
Also as the interface of the command is now mostly finalized,
we can add more documentation and more testcases to make sure
the command will continue to work as designed in the future.
We only document the rev-list related options among all the
revision related options that are now accepted, as the rev-list
related ones are probably the most useful for now.
Helped-by: Dragan Simic <dsimic@manjaro.org>
Helped-by: Linus Arver <linusa@google.com>
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want this command to be a minimal command that just does server side
picking of commits, displaying the results on stdout for higher level
scripts to consume.
So let's simplify it:
* remove the worktree and index reading/writing,
* remove the ref (and reflog) updating,
* remove the assumptions tying us to HEAD, since (a) this is not a
rebase and (b) we want to be able to pick commits in a bare repo,
i.e. to/from branches that are not checked out and not the main
branch,
* remove unneeded includes,
* handle rebasing multiple branches by printing on stdout the update
ref commands that should be performed.
The output can be piped into `git update-ref --stdin` for the ref
updates to happen.
In the future to make it easier for users to use this command
directly maybe an option can be added to automatically pipe its output
into `git update-ref`.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want replay to be a command that can be used on the server side on
any branch, not just the current one, so we are going to stop updating
HEAD in a future commit.
A "sanity check" that makes sure we are replaying the current branch
doesn't make sense anymore. Let's remove it.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The replay command will be changed in a follow up commit, so that it
will not update refs directly, but instead it will print on stdout a
list of commands that can be consumed by `git update-ref --stdin`.
We don't want this output to be polluted by its current low value
output, so let's just remove the latter.
In the future, when the command gets an option to update refs by
itself, it will make a lot of sense to display a progress meter, but
we are not there yet.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to be able to handle signed commits in some way in the future,
but we are not ready to do it now. So for the time being let's just add
a FIXME comment to remind us about it.
These are different ways we could handle them:
- in case of a cli user and if there was an interactive mode, we could
perhaps ask if the user wants to sign again
- we could add an option to just fail if there are signed commits
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's force the rev walking options we need after calling
setup_revisions() instead of before.
This might override some user supplied rev walking command line options
though. So let's detect that and warn users by:
a) setting the desired values, before setup_revisions(),
b) checking after setup_revisions() whether these values differ from
the desired values,
c) if so throwing a warning and setting the desired values again.
We want the command to work from older commits to newer ones by default.
Also we don't want history simplification, as we want to deal with all
the commits in the affected range.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's refactor the code to handle a regular commit (a commit that is
neither a root commit nor a merge commit) into a single function instead
of keeping it inside cmd_replay().
This is good for separation of concerns, and this will help further work
in the future to replay merge commits.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's not a good idea for regular Git commands to use an assert() to
check for things that could happen but are not supported.
Let's die() with an explanation of the issue instead.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of manually parsing arguments, let's start using the parse_options
API. This way this new builtin will look more standard, and in some
upcoming commits will more easily be able to handle more command line
options.
Note that we plan to later use standard revision ranges instead of
hardcoded "<oldbase> <branch>" arguments. When we will use standard
revision ranges, it will be easier to check if there are no spurious
arguments if we keep ARGV[0], so let's call parse_options() with
PARSE_OPT_KEEP_ARGV0 even if we don't need ARGV[0] right now to avoid
some useless code churn.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For now, this is just a rename from `t/helper/test-fast-rebase.c` into
`builtin/replay.c` with minimal changes to make it build appropriately.
Let's add a stub documentation and a stub test script though.
Subsequent commits will flesh out the capabilities of the new command
and make it a more standard regular builtin.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the time t6429 was written, merge-ort was still under development,
did not have quite as many tests, and certainly was not widely deployed.
Since t6429 was exercising some codepaths just a little differently, we
thought having them also test the "merge_switch_to_result()" bits of
merge-ort was useful even though they weren't intrinsic to the real
point of these tests.
However, the value provided by doing extra testing of the
"merge_switch_to_result()" bits has decreased a bit over time, and it's
actively making it harder to refactor `test-tool fast-rebase` into `git
replay`, which we are going to do in following commits. Dispense with
these bits.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 7a5d604443 (commit: detect commits that exist in commit-graph but not
in the ODB, 2023-10-31), we have introduced a new object existence check
into `repo_parse_commit_internal()` so that we do not parse commits via
the commit-graph that don't have a corresponding object in the object
database. This new check of course comes with a performance penalty,
which the commit put at around 30% for `git rev-list --topo-order`. But
there are in fact scenarios where the performance regression is even
higher. The following benchmark against linux.git with a fully-build
commit-graph:
Benchmark 1: git.v2.42.1 rev-list --count HEAD
Time (mean ± σ): 658.0 ms ± 5.2 ms [User: 613.5 ms, System: 44.4 ms]
Range (min … max): 650.2 ms … 666.0 ms 10 runs
Benchmark 2: git.v2.43.0-rc1 rev-list --count HEAD
Time (mean ± σ): 1.333 s ± 0.019 s [User: 1.263 s, System: 0.069 s]
Range (min … max): 1.302 s … 1.361 s 10 runs
Summary
git.v2.42.1 rev-list --count HEAD ran
2.03 ± 0.03 times faster than git.v2.43.0-rc1 rev-list --count HEAD
While it's a noble goal to ensure that results are the same regardless
of whether or not we have a potentially stale commit-graph, taking twice
as much time is a tough sell. Furthermore, we can generally assume that
the commit-graph will be updated by git-gc(1) or git-maintenance(1) as
required so that the case where the commit-graph is stale should not at
all be common.
With that in mind, default-disable GIT_COMMIT_GRAPH_PARANOIA and restore
the behaviour and thus performance previous to the mentioned commit. In
order to not be inconsistent, also disable this behaviour by default in
`lookup_commit_in_graph()`, where the object existence check has been
introduced right at its inception via f559d6d45e (revision: avoid
hitting packfiles when commits are in commit-graph, 2021-08-09).
This results in another speedup in commands that end up calling this
function, even though it's less pronounced compared to the above
benchmark. The following has been executed in linux.git with ~1.2
million references:
Benchmark 1: GIT_COMMIT_GRAPH_PARANOIA=true git rev-list --all --no-walk=unsorted
Time (mean ± σ): 2.947 s ± 0.003 s [User: 2.412 s, System: 0.534 s]
Range (min … max): 2.943 s … 2.949 s 3 runs
Benchmark 2: GIT_COMMIT_GRAPH_PARANOIA=false git rev-list --all --no-walk=unsorted
Time (mean ± σ): 2.724 s ± 0.030 s [User: 2.207 s, System: 0.514 s]
Range (min … max): 2.704 s … 2.759 s 3 runs
Summary
GIT_COMMIT_GRAPH_PARANOIA=false git rev-list --all --no-walk=unsorted ran
1.08 ± 0.01 times faster than GIT_COMMIT_GRAPH_PARANOIA=true git rev-list --all --no-walk=unsorted
So whereas 7a5d604443 initially introduced the logic to start doing an
object existence check in `repo_parse_commit_internal()` by default, the
updated logic will now instead cause `lookup_commit_in_graph()` to stop
doing the check by default. This behaviour continues to be tweakable by
the user via the GIT_COMMIT_GRAPH_PARANOIA environment variable.
Note that this requires us to amend some tests to manually turn on the
paranoid checks again. This is because we cause repository corruption by
manually deleting objects which are part of the commit graph already.
These circumstances shouldn't usually happen in repositories.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These pages are no longer reachable from their original locations,
which makes things difficult for readers. Instead, switch to linking to
the Internet Archive for the content.
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Beyond the fact that it's somewhat traditional to respect sites'
self-identification, it's helpful for links to point to the things
that people expect them to reference. Here that means linking to
specific pages instead of a domain.
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These sites offer https versions of their content.
Using the https versions provides some protection for users.
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's somewhat traditional to respect sites' self-identification.
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for reflog states that the --dry-run option of the
expire and delete subcommands has a corresponding short name, -n.
However, 33d7bdd645 (builtin/reflog.c: use parse-options api for expire,
delete subcommands, 2022-01-06) did not include this short name in the
new options parsing.
Re-add the short name in the new dry-run option definitions.
Signed-off-by: Josh Brobst <josh@brob.st>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"orphan branch" is not even grammatical ("orphaned branch" is), and
we have been using "unborn branch" to mean the state where the HEAD
points at a branch that does not yet exist.
Update end-user facing messages to correct them. There are cases
other random words are used (e.g., "unparented branch") but now we
have a glossary entry, use the term "unborn branch" consistently.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To orphan is a verb that denotes the act of getting on an unborn
branch, and a few references to "orphan branch" in our documentation
are misuses of the word. They caused end-user confusion, which was
made even worse because we did not have the term defined in the
glossary document. Add entries for "unborn" branch and "orphan"
operation to the glossary, and adjust existing documentation
accordingly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a bit dense logic to make a call to "die_if_checked_out()"
while trying to check out a branch. Extract it into a helper
function and give it a bit of comment to describe what is going on.
The most important part of the refactoring is the separation of the
guarding logic before making the call to die_if_checked_out() into
the caller specific part (e.g., the logic that decides that the
caller is trying to check out an existing branch) and the bypass due
to the "--ignore-other-worktrees" option. The latter will be common
no matter how the current or future callers decides they need this
protection.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the added tests cases, skip testing the `GIT_TRACE2_REDACT=0` case
because we would need to exactly model the full JSON event stream like
we did in the preceding basic tests and I do not think it is worth it.
Furthermore, the Trace2 routines print the same content in normal, perf,
or event format, and in t0210 and t0211 we already tested the basic
functionality, so no need to repeat it here.
In this test, we use the test-helper to unit test each of the event
messages where URLs can appear and confirm that they are redacted in
each event.
Signed-off-by: Jeff Hostetler <jeffhostetler@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This transmogrifies the test case that was just added to t0210, to also
cover the `GIT_TRACE2_PERF` backend.
Just like t0211, we now have to toggle the `TEST_PASSES_SANITIZE_LEAK`
annotation.
Signed-off-by: Jeff Hostetler <jeffhostetler@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is an unsafe practice to call something like
git clone https://user:password@example.com/
This not only risks leaking the password "over the shoulder" or into the
readline history of the current Unix shell, it also gets logged via
Trace2 if enabled.
Let's at least avoid logging such secrets via Trace2, much like we avoid
logging secrets in `http.c`. Much like the code in `http.c` is guarded
via `GIT_TRACE_REDACT` (defaulting to `true`), we guard the new code via
`GIT_TRACE2_REDACT` (also defaulting to `true`).
The new tests added in this commit uncover leaks in `builtin/clone.c`
and `remote.c`. Therefore we need to turn off
`TEST_PASSES_SANITIZE_LEAK`. The reasons:
- We observed that `the_repository->remote_status` is not released
properly.
- We are using `url...insteadOf` and that runs into a code path where an
allocated URL is replaced with another URL, and the original URL is
never released.
- `remote_states` contains plenty of `struct remote`s whose refspecs
seem to be usually allocated by never released.
More investigation is needed here to identify the exact cause and
proper fixes for these leaks/bugs.
Co-authored-by: Jeff Hostetler <jeffhostetler@github.com>
Signed-off-by: Jeff Hostetler <jeffhostetler@github.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add `struct key_value_info` argument to `trace2_def_param()`.
In dc90208497 (trace2: plumb config kvi, 2023-06-28) a `kvi`
argument was added to `trace2_def_param_fl()` but the macro
was not up updated. Let's fix that.
Signed-off-by: Jeff Hostetler <jeffhostetler@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it possible to use other diff algorithms than the 'myers'
default algorithm, when using the 'git merge-file' command, to help
avoid spurious conflicts by selecting a more recent algorithm such
as 'histogram', for instance when using 'git merge-file' as part of
a custom merge driver.
Signed-off-by: Antonin Delpeuch <antonin@delpeuch.eu>
Reviewed-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally introduced as `core.useBuiltinFSMonitor` in Git for Windows
and developed, improved and stabilized there, the built-in FSMonitor
only made it into upstream Git (after unnecessarily long hemming and
hawing and throwing overly perfectionist style review sticks into the
spokes) as `core.fsmonitor = true`.
In Git for Windows, with this topic branch, we re-introduce the
now-obsolete config setting, with warnings suggesting to existing users
how to switch to the new config setting, with the intention to
ultimately drop the patch at some stage.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch re-adds the deprecated --stdin/-z options to `git
reset`. Those patches were overridden by a different set of options in
the upstream Git project before we could propose `--stdin`.
We offered this in MinGit to applications that wanted a safer way to
pass lots of pathspecs to Git, and these applications will need to be
adjusted.
Instead of `--stdin`, `--pathspec-from-file=-` should be used, and
instead of `-z`, `--pathspec-file-nul`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A fix for calling `vim` in Windows Terminal caused a regression and was
reverted. We partially un-revert this, to get the fix again.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This patch introduces support to set special NTFS attributes that are
interpreted by the Windows Subsystem for Linux as file mode bits, UID
and GID.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
