Checking the work tree status is quite slow on Windows, due to slow
`lstat()` emulation (git calls `lstat()` once for each file in the
index). Windows operating system APIs seem to be much better at scanning
the status of entire directories than checking single files.
Add an `lstat()` implementation that uses a cache for lstat data. Cache
misses read the entire parent directory and add it to the cache.
Subsequent `lstat()` calls for the same directory are served directly
from the cache.
Also implement `opendir()`/`readdir()`/`closedir()` so that they create
and use directory listings in the cache.
The cache doesn't track file system changes and doesn't plug into any
modifying file APIs, so it has to be explicitly enabled for git functions
that don't modify the working copy.
Note: in an earlier version of this patch, the cache was always active and
tracked file system changes via ReadDirectoryChangesW. However, this was
much more complex and had negative impact on the performance of modifying
git commands such as 'git checkout'.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This patch introduces support to set special NTFS attributes that are
interpreted by the Windows Subsystem for Linux as file mode bits, UID
and GID.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Every once in a while, there are bug reports in Git for Windows' bug
tracker that describe an issue running [inside MSYS2
proper](https://gitforwindows.org/install-inside-msys2-proper), totally
ignoring the big, honking warning on top of [the
page](https://gitforwindows.org/install-inside-msys2-proper) that spells
out clearly that this is an unsupported use case.
At the same time, we cannot easily deflect and say "just use MSYS2
directly" (and leave the "and stop pestering us" out). We cannot do that
because there is only an _MSYS_ `git` package in MSYS2 (i.e. a Git that
uses the quite slow POSIX emulation layer provided by the MSYS2
runtime), but no `mingw-w64-git` package (which would be equivalent in
speed to Git for Windows).
In https://github.com/msys2/MINGW-packages/pull/26470, I am preparing to
change that. As part of that PR, I noticed and fixed a couple of issues
_in `git-for-windows/git` that prevented full support for
`mingw-w64-git` in MSYS2, such as problems with CLANG64 and UCRT64.
While at it, I simplified the entire setup to trust MSYS2's
`MINGW_PREFIX` & related environment variables instead of hard-coding
values like the installation prefix and what `MSYSTEM` to fall back on
if it is unset.
The Windows Subsystem for Linux (WSL) version 2 allows to use `chmod` on
NTFS volumes provided that they are mounted with metadata enabled (see
https://devblogs.microsoft.com/commandline/chmod-chown-wsl-improvements/
for details), for example:
$ chmod 0755 /mnt/d/test/a.sh
In order to facilitate better collaboration between the Windows
version of Git and the WSL version of Git, we can make the Windows
version of Git also support reading and writing NTFS file modes
in a manner compatible with WSL.
Since this slightly slows down operations where lots of files are
created (such as an initial checkout), this feature is only enabled when
`core.WSLCompat` is set to true. Note that you also have to set
`core.fileMode=true` in repositories that have been initialized without
enabling WSL compatibility.
There are several ways to enable metadata loading for NTFS volumes
in WSL, one of which is to modify `/etc/wsl.conf` by adding:
```
[automount]
enabled = true
options = "metadata,umask=027,fmask=117"
```
And reboot WSL.
It can also be enabled temporarily by this incantation:
$ sudo umount /mnt/c &&
sudo mount -t drvfs C: /mnt/c -o metadata,uid=1000,gid=1000,umask=22,fmask=111
It's important to note that this modification is compatible with, but
does not depend on WSL. The helper functions in this commit can operate
independently and functions normally on devices where WSL is not
installed or properly configured.
Signed-off-by: xungeng li <xungeng@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
winuser.h contains the definition of RT_MANIFEST that our LLVM based
toolchain needs to understand that we want to embed
compat/win32/git.manifest as an application manifest. It currently just
embeds it as additional data that Windows doesn't understand.
This also helps our GCC based toolchain understand that we only want one
copy embedded. It currently embeds one working assembly manifest and one
nearly identical, but useless copy as additional data.
This also teaches our Visual Studio based buildsystems to pick up the
manifest file from git.rc. This means we don't have to explicitly specify
it in contrib/buildsystems/Generators/Vcxproj.pm anymore. Slightly
counter-intuitively this also means we have to explicitly tell Cmake
not to embed a default manifest.
This fixes https://github.com/git-for-windows/git/issues/4707
Signed-off-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
headless-git is a git executable without opening a console window. It is
useful when other GUI executables want to call git. We should install it
together with git on Windows.
Signed-off-by: Yuyi Wang <Strawberry_Str@hotmail.com>
MSYS2 defines some helpful environment variables, e.g. `MSYSTEM`. There
is code in Git for Windows to ensure that that `MSYSTEM` variable is
set, hard-coding a default.
However, the existing solution jumps through hoops to reconstruct the
proper default, and is even incomplete doing so, as we found out when we
extended it to support CLANGARM64.
This is absolutely unnecessary because there is already a perfectly
valid `MSYSTEM` value we can use at build time. This is even true when
building the MINGW32 variant on a MINGW64 system because `makepkg-mingw`
will override the `MSYSTEM` value as per the `MINGW_ARCH` array.
The same is equally true for the `/mingw64`, `/mingw32` and
`/clangarm64` prefix: those values are already available via the
`MINGW_PREFIX` environment variable, and we just need to pass that
setting through.
Only when `MINGW_PREFIX` is not set (as is the case in Git for Windows'
minimal SDK, where only `MSYSTEM` is guaranteed to be set correctly), we
use as fall-back the top-level directory whose name is the down-cased
value of the `MSYSTEM` variable.
Incidentally, this also broadens the support to all the configurations
supported by the MSYS2 project, i.e. clang64 & ucrt64, too.
Note: This keeps the same, hard-coded MSYSTEM platform support for CMake
as before, but drops it for Meson (because it is unclear how Meson could
do this in a more flexible manner).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Ensure key CMake option values are part of the CMake output to
facilitate user support when tool updates impact the wider CMake
actions, particularly ongoing 'improvements' in Visual Studio.
These CMake displays perform the same function as the build-options.txt
provided in the main Git for Windows. CMake is already chatty.
The setting of CMAKE_EXPORT_COMPILE_COMMANDS is also reported.
Include the environment's CMAKE_EXPORT_COMPILE_COMMANDS value which
may have been propogated to CMake's internal value.
Testing the CMAKE_EXPORT_COMPILE_COMMANDS processing can be difficult
in the Visual Studio environment, as it may be cached in many places.
The 'environment' may include the OS, the user shell, CMake's
own environment, along with the Visual Studio presets and caches.
See previous commit for arefacts that need removing for a clean test.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Git's regular Makefile mentions that HOST_CPU should be defined when cross-compiling Git: 37796bca76/Makefile (L438-L439)
This is then used to set the GIT_HOST_CPU variable when compiling Git: 37796bca76/Makefile (L1337-L1341)
Then, when the user runs `git version --build-options`, it returns that value: 37796bca76/help.c (L658)
This commit adds the same functionality to the CMake configuration. Users can now set -DHOST_CPU= to set the target architecture.
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
In Git-for-Windows, work on using ARM64 has progressed. The
commit 2d94b77b27 (cmake: allow building for Windows/ARM64, 2020-12-04)
failed to notice that /compat/vcbuild/vcpkg_install.bat will default to
using the "x64-windows" architecture for the vcpkg installation if not set,
but CMake is not told of this default. Commit 635b6d99b3 (vcbuild: install
ARM64 dependencies when building ARM64 binaries, 2020-01-31) later updated
vcpkg_install.bat to accept an arch (%1) parameter, but retained the default.
This default is neccessary for the use case where the project directory is
opened directly in Visual Studio, which will find and build a CMakeLists.txt
file without any parameters, thus expecting use of the default setting.
Also Visual studio will generate internal .sln solution and .vcxproj project
files needed for some extension tools. Inform users of the additional
.sln/.vcxproj generation.
** How to test:
rm -rf '.vs' # remove old visual studio settings
rm -rf 'compat/vcbuild/vcpkg' # remove any vcpkg downloads
rm -rf 'contrib/buildsystems/out' # remove builds & CMake artifacts
with a fresh Visual Studio Community Edition, File>>Open>>(git *folder*)
to load the project (which will take some time!).
check for successful compilation.
The implicit .sln (etc.) are in the hidden .vs directory created by
Visual Studio.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
The intention of this change is to align with how the top-level git
`Makefile` defines its own test target (which also internally calls
`$(MAKE) -C t/ all`). This change also ensures the consistency of
`make -C contrib/subtree test` with other testing in CI executions
(which rely on `$DEFAULT_TEST_TARGET` being defined as `prove`).
Signed-off-by: Victoria Dye <vdye@github.com>
When processing large history graphs on Debian or Ubuntu, "git
subtree" can die with a "recursion depth reached" error.
* cs/subtree-split-recursion:
contrib/subtree: reduce recursion during split
contrib/subtree: functionalize split traversal
contrib/subtree: reduce function side-effects
The path completion for commands like `git rm` and `git mv`, is being
updated to hide dotfiles by default, unless the user explicitly starts
the path with a dot, matching standard shell-completion behavior.
* za/completion-hide-dotfiles:
completion: hide dotfiles for selected path completion
Various typos, grammatical errors, and duplicated words in both
documentation and code comments have been corrected.
* wy/docs-typofixes:
docs: fix typos and grammar
"git rev-list" (and "git log" family of commands) learned a new "--max-count-oldest"
that picks oldest N commits in the range instead of the usual newest.
* mf/revision-max-count-oldest:
bash-completions: add --max-count-oldest
revision.c: implement --max-count-oldest
The 'git-jump' command (in contrib/) has been taught to automatically
pick a mode (merge, diff, or ws) when invoked without arguments.
* gh/jump-auto-mode:
git-jump: pick a mode automatically when invoked without arguments
The fsmonitor daemon has been implemented for Linux.
* pt/fsmonitor-linux:
fsmonitor: convert shown khash to strset in do_handle_client
fsmonitor: add tests for Linux
fsmonitor: add timeout to daemon stop command
fsmonitor: close inherited file descriptors and detach in daemon
run-command: add close_fd_above_stderr option
fsmonitor: implement filesystem change listener for Linux
fsmonitor: rename fsm-settings-darwin.c to fsm-settings-unix.c
fsmonitor: rename fsm-ipc-darwin.c to fsm-ipc-unix.c
fsmonitor: use pthread_cond_timedwait for cookie wait
compat/win32: add pthread_cond_timedwait
fsmonitor: fix hashmap memory leak in fsmonitor_run_daemon
fsmonitor: fix khash memory leak in do_handle_client
t9210, t9211: disable GIT_TEST_SPLIT_INDEX for scalar clone tests
Fix several spelling mistakes, subject-verb agreement issues, and
duplicated words.
Signed-off-by: Weijie Yuan <wy@wyuan.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The completion helper for index paths uses git ls-files rather than
shell filename completion. As a result, leading-dot paths such as a
tracked .gitignore were offered even when the user had not started the
path with ".".
Hide leading-dot path components for git rm, git mv, and git ls-files
when completing an empty path component. Explicit dot completion is
still preserved, so git rm . can still complete .gitignore.
This matches standard shell filename completion behavior, where dotfiles
are hidden by default unless the user starts their input with a dot.
This also resolves four TODO comments in t/9902-completion.sh which
have been present since 2013 (commit ddf07bddef, "completion: add file
completion tests", 2013-04-27), expecting that .gitignore would not be
shown when completing on an empty path component.
Signed-off-by: Zakariyah Ali <zakariyahali100@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git jump` is invoked with no positional arguments (and no
arguments after `--stdout`) it currently prints usage and exits with
status 1.
But there are two situations where we can usefully infer the most
valuable and likely mode that a user would want to use, and select it
automatically:
1. When there are unmerged paths in the index, the user likely
wants `git jump merge`.
2. When the working tree has unstaged changes, the user likely
wants `git jump diff`.
In this commit we teach `git jump` a new "auto" mode which detects these
cases and dispatches to the corresponding mode automatically. The user
can either explicitly spell out `git jump auto`, or just leave it at
`git jump` (because "auto" is the default).
If none of the interesting cases listed above applies, then auto mode
falls back to the existing usage-and-exit behavior.
Signed-off-by: Greg Hurrell <greg.hurrell@datadoghq.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the previous commit removing every opt-in, the build-system
plumbing for nedmalloc has nothing left to switch on. Remove it so
that the upcoming deletion of the compat/nedmalloc/ tree is a pure
file removal.
Assisted-by: Opus 4.7
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The vendored nedmalloc allocator under compat/nedmalloc/ has been
unmaintained upstream for a very long time: the original repository at
https://github.com/ned14/nedmalloc received its last commit on July 5,
2014, and was archived (made read-only) by its owner on March 15, 2019.
Our copy has been carried forward unchanged ever since.
The Git for Windows commit that introduced mimalloc as a replacement
on Windows ("mingw: use mimalloc", 2019-06-24, present in the Git for
Windows branch thicket but not upstream) already observed at that time
that nedmalloc had ceased to see any updates for several years.
This came to a head when the Git for Windows SDK upgraded to GCC 16:
the `add_segment()` function in `compat/nedmalloc/malloc.c.h` declares
`int nfences = 0` and only references it inside an `assert()`, which
GCC 16 now flags as `-Wunused-but-set-variable`. Combined with the
`-Werror` enabled by `DEVELOPER=1`, this turns into a hard build
failure:
compat/nedmalloc/malloc.c.h: In function 'add_segment':
compat/nedmalloc/malloc.c.h:3897:7: error: variable 'nfences' set but not used [-Werror=unused-but-set-variable=]
3897 | int nfences = 0;
| ^~~~~~~
cc1.exe: all warnings being treated as errors
The same source built without complaint under GCC 15.2.0; the
regression was bisected to the SDK package update at
https://github.com/git-for-windows/git-sdk-64/commit/188d93dd455
(`mingw-w64-x86_64-gcc 15.2.0-14 -> 16.1.0-1`), with the failing CI
run captured at
https://github.com/git-for-windows/git-sdk-64/actions/runs/25244795074.
Rather than patch the unmaintained vendored sources to silence the
warning, stop opting into nedmalloc altogether on Windows. The
platform allocator is what every non-MINGW build already uses, and a
fresh build of git.git's master against a minimal Git for Windows SDK
upgraded to GCC 16 completes successfully.
The compat/nedmalloc/ subtree itself is removed by subsequent commits
in this series.
Assisted-by: Opus 4.7
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement the built-in fsmonitor daemon for Linux using the inotify
API, bringing it to feature parity with the existing Windows and macOS
implementations.
The implementation uses inotify rather than fanotify because fanotify
requires either CAP_SYS_ADMIN or CAP_PERFMON capabilities, making it
unsuitable for an unprivileged user-space daemon. While inotify has
the limitation of requiring a separate watch on every directory (unlike
macOS's FSEvents, which can monitor an entire directory tree with a
single watch), it operates without elevated privileges and provides
the per-file event granularity needed for fsmonitor.
The listener uses inotify_init1(O_NONBLOCK) with a poll loop that
checks for events with a 50-millisecond timeout, keeping the inotify
queue well-drained to minimize the risk of overflows. Bidirectional
hashmaps map between watch descriptors and directory paths for efficient
event resolution. Directory renames are tracked using inotify's cookie
mechanism to correlate IN_MOVED_FROM and IN_MOVED_TO event pairs; a
periodic check detects stale renames where the matching IN_MOVED_TO
never arrived, forcing a resync.
New directory creation triggers recursive watch registration to ensure
all subdirectories are monitored. The IN_MASK_CREATE flag is used
where available to prevent modifying existing watches, with a fallback
for older kernels. When IN_MASK_CREATE is available and
inotify_add_watch returns EEXIST, it means another thread or recursive
scan has already registered the watch, so it is safe to ignore.
Remote filesystem detection uses statfs() to identify network-mounted
filesystems (NFS, CIFS, SMB, FUSE, etc.) via their magic numbers.
Mount point information is read from /proc/mounts and matched against
the statfs f_fsid to get accurate, human-readable filesystem type names
for logging. When the .git directory is on a remote filesystem, the
IPC socket falls back to $HOME or a user-configured directory via the
fsmonitor.socketDir setting.
Based-on-patch-by: Eric DeCosta <edecosta@mathworks.com>
Based-on-patch-by: Marziyeh Esipreh <marziyeh.esipreh@gmail.com>
Signed-off-by: Paul Tarjan <github@paulisageek.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fsmonitor settings logic in fsm-settings-darwin.c is not
Darwin-specific and will be reused by the upcoming Linux
implementation. Rename it to fsm-settings-unix.c to reflect that it
is shared by all Unix platforms.
Update the build files (meson.build and CMakeLists.txt) to use
FSMONITOR_OS_SETTINGS for fsm-settings, matching the approach already
used for fsm-ipc.
Based-on-patch-by: Eric DeCosta <edecosta@mathworks.com>
Based-on-patch-by: Marziyeh Esipreh <marziyeh.esipreh@gmail.com>
Signed-off-by: Paul Tarjan <github@paulisageek.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fsmonitor IPC path logic in fsm-ipc-darwin.c is not
Darwin-specific and will be reused by the upcoming Linux
implementation. Rename it to fsm-ipc-unix.c to reflect that it
is shared by all Unix platforms.
Introduce FSMONITOR_OS_SETTINGS (set to "unix" for non-Windows, "win32"
for Windows) as a separate variable from FSMONITOR_DAEMON_BACKEND so
that the build files can distinguish between platform-specific files
(listen, health, path-utils) and shared Unix files (ipc, settings).
Move fsm-ipc to the FSMONITOR_OS_SETTINGS section in the Makefile, and
switch fsm-path-utils to use FSMONITOR_DAEMON_BACKEND since path-utils
is platform-specific (there will be separate darwin and linux versions).
Based-on-patch-by: Eric DeCosta <edecosta@mathworks.com>
Based-on-patch-by: Marziyeh Esipreh <marziyeh.esipreh@gmail.com>
Signed-off-by: Paul Tarjan <github@paulisageek.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Build instruction for recently added writev() compatibility wrapper
has been also added to cmake.
* js/cmake-needs-writev-compat-too:
cmake: use writev(3p) wrapper as needed
This is a companion patch of 3b9b2c2a29 (compat/posix: introduce
writev(3p) wrapper, 2026-03-13) where support for using the `writev()`
wrapper was introduced in the `Makefile` and the Meson-based build, but
the CMake build still needs that treatment, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various updates to contrib/diff-highlight, including documentation
updates, test improvements, and color configuration handling.
* jk/diff-highlight-more:
diff-highlight: fetch all config with one process
diff-highlight: allow module callers to pass in color config
diff-highlight: test color config
diff-highlight: use test_decode_color in tests
t: add matching negative attributes to test_decode_color
diff-highlight: check diff-highlight exit status in tests
diff-highlight: drop perl version dependency back to 5.8
diff-highlight: mention build instructions
The handling of the incomplete lines at the end by "git
diff-highlight" has been fixed.
* jk/diff-highlight-identical-pairs:
contrib/diff-highlight: do not highlight identical pairs
When diff-highlight was written, there was no way to fetch multiple
config keys _and_ have them interpreted as colors. So we were stuck
with either invoking git-config once for each config key, or fetching
them all and converting human-readable color names into ANSI codes
ourselves.
I chose the former, but it means that diff-highlight kicks off 6
git-config processes (even if you haven't configured anything, it has to
check each one).
But since Git 2.18.0, we can do:
git config --type=color --get-regexp=^color\.diff-highlight\.
to get all of them in one shot.
Note that any callers which pass in colors directly to the module via
@OLD_HIGHLIGHT and @NEW_HIGHLIGHT (like diff-so-fancy plans to do) are
unaffected; those colors suppress any config lookup we'd do ourselves.
You can see the effect like:
# diff-highlight suppresses git-config's stderr, so dump
# trace through descriptor 3
git show d1f33c753d | GIT_TRACE=3 diff-highlight 3>&2 >/dev/null
which drops from 6 lines down to 1.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users of the module may want to pass in their own color config for a few
obvious reasons:
- they are pulling the config from different variables than
diff-highlight itself uses
- they are loading the config in a more efficient way (say, by parsing
git-config --list) and don't want to incur the six (!) git-config
calls that DiffHighlight.pm runs to check all config
Let's allow users of the module to pass in the color config, and
lazy-load it when needed if they haven't.
Signed-off-by: Scott Baker <scott@perturb.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We added configurable colors long ago in bca45fbc1f (diff-highlight:
allow configurable colors, 2014-11-20), but never actually tested it.
Since we'll be touching the color code in a moment, this is a good time
to beef up the tests.
Note that we cover both the highlight/reset style used by the default
colors, as well as the normal/highlight style added by that commit
(which was previously totally untested).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff-highlight tests use raw color bytes when comparing expected and
actual output. Let's use test_decode_color, which is our usual technique
in other tests. It makes reading test output diffs a bit easier, since
you're not relying on your terminal to interpret the result (or worse,
interpreting characters yourself via "cat -A").
This will also make it easier to add tests with new colors/attributes,
without having to pre-define the byte sequences ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When testing diff-highlight, we pipe the output through a sanitizing
function. This loses the exit status of diff-highlight itself, which
could mean we are missing cases where it crashes or exits unexpectedly.
Use an extra tempfile to avoid the pipe.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff-highlight code does not rely on any perl features beyond what
perl 5.8 provides. We bumped it to v5.26 along with the rest of the
project's perl scripts in 702d8c1f3b (Require Perl 5.26.0, 2024-10-23).
There's some value in just having a uniform baseline for the project,
but I think diff-highlight is special here:
- it's in a contrib/ directory that is not frequently touched, so
there is little risk of Git developers getting annoyed that modern
perl features are not available
- it provides a module used by other projects. In particular,
diff-so-fancy relies on DiffHighlight.pm but does not otherwise
require a perl version more modern than 5.8.
Let's drop back to the more conservative requirement.
Signed-off-by: Scott Baker <scott@perturb.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, this was just a script in a directory that could be
run directly. That changed in 0c977dbc81 (diff-highlight: split code
into module, 2017-06-15). Let's update the README to make it more clear
that you need to run make.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We pair lines for highlighting based on their position in the hunk. So
we should never see two identical lines paired, like:
-one
-two
+one
+something else
which would pair -one/+one, because that implies that the diff could
easily be shrunk by turning line "one" into context.
But there is (at least) one exception: removing a newline at the end of
a file will produce a diff like:
-foo
+foo
\No newline at end of file
And we will pair those two lines. As a result, we end up marking the
whole line, including the newline, as the shared prefix. And there's an
empty suffix.
The most obvious bug here is that when we try to print the highlighted
lines, we remove the trailing newline from the suffix, but do not bother
with the prefix (under the assumption that there had to be a difference
_somewhere_ in the line, and thus the prefix would not eat all the way
up to the newline). And so you get an extra line like:
-foo
+foo
\No newline at end of file
This is obviously ugly, but also causes interactive.diffFilter to
(rightly) complain that the input and output do not match their lines
1-to-1.
This could easily be fixed by chomping the prefix, too, but I think the
problem is deeper. For one, I suspect some of the other logic gets
confused by forming an array with zero-indexed element "3" in a
3-element array. But more importantly, we try not to highlight whole
lines, as there's nothing interesting to show there. So let's catch this
early in is_pair_interesting() and bail to our usual passthrough
strategy.
Reported-by: Scott Baker <scott@perturb.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a bunch of scripts used by our different build systems that are
all located in the top-level directory. Now that we have introduced the
new "tools/" directory though we have a better home for them.
Move the scripts into the "tools/" directory.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "update-unicode.sh" script is used to update the unicode data
compiled into Git whenever a new version of the Unicode standard has
been released. As such, it is a natural part of our developer-facing
tooling, and its presence in "contrib/" is misleading.
Promote the script into the new "tools/" directory.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "coverage-diff.sh" script can be used to get information about test
coverage fro the Git codebase. It is thus rather specific to our build
and test infrastructure and part of the developer-facing tooling. The
fact that this script is part of "contrib/" is thus rather misleading
and a historic wart.
Promote the tool into the new "tools/" directory.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Coccinelle tool is an ingrained part of our build infrastructure. It
is executed by our CI to detect antipatterns and is used to detect
misuses of certain interfaces. It's presence in "contrib/" is thus
rather misleading.
Promote the configuration into the new "tools/" directory.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
