Teach FSCACHE to remember "not found" directories.
This is a performance optimization.
FSCACHE is a performance optimization available for Windows. It
intercepts Posix-style lstat() calls into an in-memory directory
using FindFirst/FindNext. It improves performance on Windows by
catching the first lstat() call in a directory, using FindFirst/
FindNext to read the list of files (and attribute data) for the
entire directory into the cache, and short-cut subsequent lstat()
calls in the same directory. This gives a major performance
boost on Windows.
However, it does not remember "not found" directories. When STATUS
runs and there are missing directories, the lstat() interception
fails to find the parent directory and simply return ENOENT for the
file -- it does not remember that the FindFirst on the directory
failed. Thus subsequent lstat() calls in the same directory, each
re-attempt the FindFirst. This completely defeats any performance
gains.
This can be seen by doing a sparse-checkout on a large repo and
then doing a read-tree to reset the skip-worktree bits and then
running status.
This change reduced status times for my very large repo by 60%.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
If multiple threads access a directory that is not yet in the cache, the
directory will be loaded by each thread. Only one of the results is added
to the cache, all others are leaked. This wastes performance and memory.
On cache miss, add a future object to the cache to indicate that the
directory is currently being loaded. Subsequent threads register themselves
with the future object and wait. When the first thread has loaded the
directory, it replaces the future object with the result and notifies
waiting threads.
Signed-off-by: Karsten Blees <blees@dcon.de>
Checking the work tree status is quite slow on Windows, due to slow
`lstat()` emulation (git calls `lstat()` once for each file in the
index). Windows operating system APIs seem to be much better at scanning
the status of entire directories than checking single files.
Add an `lstat()` implementation that uses a cache for lstat data. Cache
misses read the entire parent directory and add it to the cache.
Subsequent `lstat()` calls for the same directory are served directly
from the cache.
Also implement `opendir()`/`readdir()`/`closedir()` so that they create
and use directory listings in the cache.
The cache doesn't track file system changes and doesn't plug into any
modifying file APIs, so it has to be explicitly enabled for git functions
that don't modify the working copy.
Note: in an earlier version of this patch, the cache was always active and
tracked file system changes via ReadDirectoryChangesW. However, this was
much more complex and had negative impact on the performance of modifying
git commands such as 'git checkout'.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Add a macro to mark code sections that only read from the file system,
along with a config option and documentation.
This facilitates implementation of relatively simple file system level
caches without the need to synchronize with the file system.
Enable read-only sections for 'git status' and preload_index.
Signed-off-by: Karsten Blees <blees@dcon.de>
Emulating the POSIX lstat API on Windows via GetFileAttributes[Ex] is quite
slow. Windows operating system APIs seem to be much better at scanning the
status of entire directories than checking single files. A caching
implementation may improve performance by bulk-reading entire directories
or reusing data obtained via opendir / readdir.
Make the lstat implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Emulating the POSIX `dirent` API on Windows via
`FindFirstFile()`/`FindNextFile()` is pretty staightforward, however,
most of the information provided in the `WIN32_FIND_DATA` structure is
thrown away in the process. A more sophisticated implementation may
cache this data, e.g. for later reuse in calls to `lstat()`.
Make the `dirent` implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Define a base DIR structure with pointers to `readdir()`/`closedir()`
that match the `opendir()` implementation (similar to vtable pointers in
Object-Oriented Programming). Define `readdir()`/`closedir()` so that
they call the function pointers in the `DIR` structure. This allows to
choose the `opendir()` implementation on a call-by-call basis.
Make the fixed-size `dirent.d_name` buffer a flex array, as `d_name` may
be implementation specific (e.g. a caching implementation may allocate a
`struct dirent` with _just_ the size needed to hold the `d_name` in
question).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We will use them in the upcoming "FSCache" patches (to accelerate
sequential lstat() calls).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch teaches `git clean` to respect NTFS junctions and Unix
bind mounts: it will now stop at those boundaries.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Emit NFC or NFC and NFD spellings of pathnames on macOS.
MacOS is Unicode composition insensitive, so NFC and NFD spellings are
treated as aliases and collide. While the spelling of pathnames in
filesystem events depends upon the underlying filesystem, such as
APFS, HFS+ or FAT32, the OS enforces such collisions regardless of
filesystem.
Teach the daemon to always report the NFC spelling and to report
the NFD spelling when stored in that format on the disk.
This is slightly more general than "core.precomposeUnicode".
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Git for Windows has defaulted to core.fsyncObjectFiles=true since
September 2017. We turn on syncing of loose object files with batch mode
in upstream Git so that we can get broad coverage of the new code
upstream.
We don't actually do fsyncs in the most of the test suite, since
GIT_TEST_FSYNC is set to 0. However, we do exercise all of the
surrounding batch mode code since GIT_TEST_FSYNC merely makes the
maybe_fsync wrapper always appear to succeed.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the listener thread to shutdown the daemon if the spelling of the
worktree root directory changes.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
We used to have that `make vcxproj` hack, but a hack it is. In the
meantime, we have a much cleaner solution: using CMake, either
explicitly, or even more conveniently via Visual Studio's built-in CMake
support (simply open Git's top-level directory via File>Open>Folder...).
Let's let the `README` reflect this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
As reported in https://github.com/newren/git-filter-repo/pull/225, it
looks like 99 bytes is not really sufficient to represent e.g. the full
path to Python when installed via Windows Store (and this path is used
in the hasb bang line when installing scripts via `pip`).
Let's increase it to what is probably the maximum sensible path size:
MAX_PATH. This makes `parse_interpreter()` in line with what
`lookup_prog()` handles.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Vilius Šumskas <vilius@sumskas.eu>
Force shutdown fsmonitor daemon if the worktree root directory
is moved, renamed, or deleted.
Use Windows low-level GetFileInformationByHandle() to get and
compare the Windows system unique ID for the directory with a
cached version when we started up. This lets us detect the
case where someone renames the directory that we are watching
and then creates a new directory with the original pathname.
This is important because we are listening to a named pipe for
requests and they are stored in the Named Pipe File System (NPFS)
which a kernel-resident pseudo filesystem not associated with
the actual NTFS directory.
For example, if the daemon was watching "~/foo/", it would have
a directory-watch handle on that directory and a named-pipe
handle for "//./pipe/...foo". Moving the directory to "~/bar/"
does not invalidate the directory handle. (So the daemon would
actually be watching "~/bar" but listening on "//./pipe/...foo".
If the user then does "git init ~/foo" and causes another daemon
to start, the first daemon will still have ownership of the pipe
and the second daemon instance will fail to start. "git status"
clients in "~/foo" will ask "//./pipe/...foo" about changes and
the first daemon instance will tell them about "~/bar".
This commit causes the first daemon to shutdown if the system unique
ID for "~/foo" changes (changes from what it was when the daemon
started). Shutdown occurs after a periodic poll. After the
first daemon exits and releases the lock on the named pipe,
subsequent Git commands may cause another daemon to be started
on "~/foo". Similarly, a subsequent Git command may cause another
daemon to be started on "~/bar".
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Extend the Windows version of the "health" thread to periodically
inspect the system and shutdown if warranted.
This commit updates the thread's wait loop to use a timeout and
defines a (currently empty) table of functions to poll the system.
A later commit will add functions to the table to actually
inspect the system.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Create another thread to watch over the daemon process and
automatically shut it down if necessary.
This commit creates the basic framework for a "health" thread
to monitor the daemon and/or the file system. Later commits
will add platform-specific code to do the actual work.
The "health" thread is intended to monitor conditions that
would be difficult to track inside the IPC thread pool and/or
the file system listener threads. For example, when there are
file system events outside of the watched worktree root or if
we want to have an idle-timeout auto-shutdown feature.
This commit creates the health thread itself, defines the thread-proc
and sets up the thread's event loop. It integrates this new thread
into the existing IPC and Listener thread models.
This commit defines the API to the platform-specific code where all of
the monitoring will actually happen.
The platform-specific code for MacOS is just stubs. Meaning that the
health thread will immediately exit on MacOS, but that is OK and
expected. Future work can define MacOS-specific monitoring.
The platform-specific code for Windows sets up enough of the
WaitForMultipleObjects() machinery to watch for system and/or custom
events. Currently, the set of wait handles only includes our custom
shutdown event (sent from our other theads). Later commits in this
series will extend the set of wait handles to monitor other
conditions.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Rename platform-specific listener thread related variables
and data types as we prepare to add another backend thread
type.
[] `struct fsmonitor_daemon_backend_data` becomes `struct fsm_listen_data`
[] `state->backend_data` becomes `state->listen_data`
[] `state->error_code` becomes `state->listen_error_code`
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Teach the fsmonitor--daemon to CD outside of the worktree
before starting up.
The common Git startup mechanism causes the CWD of the daemon process
to be in the root of the worktree. On Windows, this causes the daemon
process to hold a locked handle on the CWD and prevents other
processes from moving or deleting the worktree while the daemon is
running.
CD to HOME before entering main event loops.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Ignore FSEvents resulting from `xattr` changes. Git does not care about
xattr's or changes to xattr's, so don't waste time collecting these
events in the daemon nor transmitting them to clients.
Various security tools add xattrs to files and/or directories, such as
to mark them as having been downloaded. We should ignore these events
since it doesn't affect the content of the file/directory or the normal
meta-data that Git cares about.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
On MacOS mark repos on NTFS or FAT32 volumes as incompatible.
The builtin FSMonitor used Unix domain sockets on MacOS for IPC
with clients. These sockets are kept in the .git directory.
Unix sockets are not supported by NTFS and FAT32, so the daemon
cannot start up.
Test for this during our compatibility checking so that client
commands do not keep trying to start the daemon.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Teach Git to detect remote working directories on Windows and mark them as
incompatible with FSMonitor.
With this `git fsmonitor--daemon run` will error out with a message like it
does for bare repos.
Client commands, such as `git status`, will not attempt to start the daemon.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Teach Git to detect remote working directories on macOS and mark them as
incompatible with FSMonitor.
With this, `git fsmonitor--daemon run` will error out with a message
like it does for bare repos.
Client commands, like `git status`, will not attempt to start the daemon.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
VFS for Git virtual repositories are incompatible with FSMonitor.
VFS for Git is a downstream fork of Git. It contains its own custom
file system watcher that is aware of the virtualization. If a working
directory is being managed by VFS for Git, we should not try to watch
it because we may get incomplete results.
We do not know anything about how VFS for Git works, but we do
know that VFS for Git working directories contain a well-defined
config setting. If it is set, mark the working directory as
incompatible.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Extend generic incompatibility checkout with platform-specific
mechanism. Stub in Win32 version.
In the existing fsmonitor-settings code we have a way to mark
types of repos as incompatible with fsmonitor (whether via the
hook and IPC APIs). For example, we do this for bare repos,
since there are no files to watch.
Extend this exclusion mechanism for platform-specific reasons.
This commit just creates the framework and adds a stub for Win32.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Teach FSMonitor daemon on Windows to recognize shortname paths as
aliases of normal longname paths. FSMonitor clients, such as `git
status`, should receive the longname spelling of changed files (when
possible).
Sometimes we receive FS events using the shortname, such as when a CMD
shell runs "RENAME GIT~1 FOO" or "RMDIR GIT~1". The FS notification
arrives using whatever combination of long and shortnames were used by
the other process. (Shortnames do seem to be case normalized,
however.)
Use Windows GetLongPathNameW() to try to map the pathname spelling in
the notification event into the normalized longname spelling. (This
can fail if the file/directory is deleted, moved, or renamed, because
we are asking the FS for the mapping in response to the event and
after it has already happened, but we try.)
Special case the shortname spelling of ".git" to avoid under-reporting
these events.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
The vcpkg downloads may not succeed. Warn careful readers of the time out.
A simple retry will usually resolve the issue.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The vcpkg_install batch file depends on the availability of a
working Git on the CMD path. This may not be present if the user
has selected the 'bash only' option during Git-for-Windows install.
Detect and tell the user about their lack of a working Git in the CMD
window.
Fixes#2348.
A separate PR https://github.com/git-for-windows/build-extra/pull/258
now highlights the recommended path setting during install.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
On Windows, there are two kinds of executables, console ones and
non-console ones. Git's executables are all console ones.
When launching the former e.g. in a scheduled task, a CMD window pops
up. This is not what we want for the tasks installed via the `git
maintenance` command.
To work around this, let's introduce `headless-git.exe`, which is a
non-console program that does _not_ pop up any window. All it does is to
re-launch `git.exe`, suppressing that console window, passing through
all command-line arguments as-are.
Helped-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Helped-by: Yuyi Wang <Strawberry_Str@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
In this context, a "feature" is a dependency combined with its own
dependencies.
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Move the default `-ENTRY` and `-SUBSYSTEM` arguments for
MSVC=1 builds from `config.mak.uname` into `clink.pl`.
These args are constant for console-mode executables.
Add support to `clink.pl` for generating a Win32 GUI application
using the `-mwindows` argument (to match how GCC does it). This
changes the `-ENTRY` and `-SUBSYSTEM` arguments accordingly.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Ignore the `-fno-stack-protector` compiler argument when building
with MSVC. This will be used in a later commit that needs to build
a Win32 GUI app.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
