No disrespect to other mailing list archives, but the local part of
their URLs will become pretty much meaningless once the archives go
out of service, and we learned the lesson hard way when $gmane
stopped serving.
Let's point into https://lore.kernel.org/ for an article that can be
found there, because the local part of the URL has the Message-Id:
that can be used to find the same message in other archives, even if
lore goes down.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cruft packs are an alternative mechanism for storing a collection of
unreachable objects whose mtimes are recent enough to avoid being
pruned out of the repository.
When cruft packs were first introduced back in b757353676
(builtin/pack-objects.c: --cruft without expiration, 2022-05-20) and
a7d493833f (builtin/pack-objects.c: --cruft with expiration,
2022-05-20), the recommended workflow consisted of:
- Repacking periodically, either by packing anything loose in the
repository (via `git repack -d`) or producing a geometric sequence
of packs (via `git repack --geometric=<d> -d`).
- Every so often, splitting the repository into two packs, one cruft
to store the unreachable objects, and another non-cruft pack to
store the reachable objects.
Repositories may (out of band with the above) choose periodically to
prune out some unreachable objects which have aged out of the grace
period by generating a pack with `--cruft-expiration=<approxidate>`.
This allowed repositories to maintain relatively few packs on average,
and quarantine unreachable objects together in a cruft pack, avoiding
the pitfalls of holding unreachable objects as loose while they age out
(for more, see some of the details in 3d89a8c118
(Documentation/technical: add cruft-packs.txt, 2022-05-20)).
This all works, but can be costly from an I/O-perspective when
frequently repacking a repository that has many unreachable objects.
This problem is exacerbated when those unreachable objects are rarely
(if every) pruned.
Since there is at most one cruft pack in the above scheme, each time we
update the cruft pack it must be rewritten from scratch. Because much of
the pack is reused, this is a relatively inexpensive operation from a
CPU-perspective, but is very costly in terms of I/O since we end up
rewriting basically the same pack (plus any new unreachable objects that
have entered the repository since the last time a cruft pack was
generated).
At the time, we decided against implementing more robust support for
multiple cruft packs. This patch implements that support which we were
lacking.
Introduce a new option `--max-cruft-size` which allows repositories to
accumulate cruft packs up to a given size, after which point a new
generation of cruft packs can accumulate until it reaches the maximum
size, and so on. To generate a new cruft pack, the process works like
so:
- Sort a list of any existing cruft packs in ascending order of pack
size.
- Starting from the beginning of the list, group cruft packs together
while the accumulated size is smaller than the maximum specified
pack size.
- Combine the objects in these cruft packs together into a new cruft
pack, along with any other unreachable objects which have since
entered the repository.
Once a cruft pack grows beyond the size specified via `--max-cruft-size`
the pack is effectively frozen. This limits the I/O churn up to a
quadratic function of the value specified by the `--max-cruft-size`
option, instead of behaving quadratically in the number of total
unreachable objects.
When pruning unreachable objects, we bypass the new code paths which
combine small cruft packs together, and instead start from scratch,
passing in the appropriate `--max-pack-size` down to `pack-objects`,
putting it in charge of keeping the resulting set of cruft packs sized
correctly.
This may seem like further I/O churn, but in practice it isn't so bad.
We could prune old cruft packs for whom all or most objects are removed,
and then generate a new cruft pack with just the remaining set of
objects. But this additional complexity buys us relatively little,
because most objects end up being pruned anyway, so the I/O churn is
well contained.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The terminology was changed in b0d12fc9b2 (Use the word 'stuck'
instead of 'sticked').
Signed-off-by: Štěpán Němec <stepnem@smrk.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the grammar ("which default value is") and reword to match other
similar descriptions (say "configuration variable" instead of
"parameter", link to git-config(1)).
Signed-off-by: Štěpán Němec <stepnem@smrk.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git for-each-ref" and friends learn to apply mailmap to authorname
and other fields.
* ks/ref-filter-mailmap:
ref-filter: add mailmap support
t/t6300: introduce test_bad_atom
t/t6300: cleanup test_atom
"git rev-list --stdin" learned to take non-revisions (like "--not")
recently from the standard input, but the way such a "--not" was
handled was quite confusing, which has been rethought. This is
potentially a change that breaks backward compatibility.
* ps/revision-cmdline-stdin-not:
revision: make pseudo-opt flags read via stdin behave consistently
The list of additional XY values for submodules in short format
isn't formatted consistently with the rest of the document.
Format as list for consistency.
Signed-off-by: Javier Mora <cousteaulecommandant@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous commit implemented the `gc.repackFilter` config option
to specify a filter that should be used by `git gc` when
performing repacks.
Another previous commit has implemented
`git repack --filter-to=<dir>` to specify the location of the
packfile containing filtered out objects when using a filter.
Let's implement the `gc.repackFilterTo` config option to specify
that location in the config when `gc.repackFilter` is used.
Now when `git gc` will perform a repack with a <dir> configured
through this option and not empty, the repack process will be
passed a corresponding `--filter-to=<dir>` argument.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous commit has implemented `git repack --filter=<filter-spec>` to
allow users to filter out some objects from the main pack and move them
into a new different pack.
It would be nice if this new different pack could be created in a
different directory than the regular pack. This would make it possible
to move large blobs into a pack on a different kind of storage, for
example cheaper storage.
Even in a different directory, this pack can be accessible if, for
example, the Git alternates mechanism is used to point to it. In fact
not using the Git alternates mechanism can corrupt a repo as the
generated pack containing the filtered objects might not be accessible
from the repo any more. So setting up the Git alternates mechanism
should be done before using this feature if the user wants the repo to
be fully usable while this feature is used.
In some cases, like when a repo has just been cloned or when there is no
other activity in the repo, it's Ok to setup the Git alternates
mechanism afterwards though. It's also Ok to just inspect the generated
packfile containing the filtered objects and then just move it into the
'.git/objects/pack/' directory manually. That's why it's not necessary
for this command to check that the Git alternates mechanism has been
already setup.
While at it, as an example to show that `--filter` and `--filter-to`
work well with other options, let's also add a test to check that these
options work well with `--max-pack-size`.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous commit has implemented `git repack --filter=<filter-spec>` to
allow users to filter out some objects from the main pack and move them
into a new different pack.
Users might want to perform such a cleanup regularly at the same time as
they perform other repacks and cleanups, so as part of `git gc`.
Let's allow them to configure a <filter-spec> for that purpose using a
new gc.repackFilter config option.
Now when `git gc` will perform a repack with a <filter-spec> configured
through this option and not empty, the repack process will be passed a
corresponding `--filter=<filter-spec>` argument.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option puts the objects specified by `<filter-spec>` into a
separate packfile.
This could be useful if, for example, some blobs take up a lot of
precious space on fast storage while they are rarely accessed. It could
make sense to move them into a separate cheaper, though slower, storage.
It's possible to find which new packfile contains the filtered out
objects using one of the following:
- `git verify-pack -v ...`,
- `test-tool find-pack ...`, which a previous commit added,
- `--filter-to=<dir>`, which a following commit will add to specify
where the pack containing the filtered out objects will be.
This feature is implemented by running `git pack-objects` twice in a
row. The first command is run with `--filter=<filter-spec>`, using the
specified filter. It packs objects while omitting the objects specified
by the filter. Then another `git pack-objects` command is launched using
`--stdin-packs`. We pass it all the previously existing packs into its
stdin, so that it will pack all the objects in the previously existing
packs. But we also pass into its stdin, the pack created by the previous
`git pack-objects --filter=<filter-spec>` command as well as the kept
packs, all prefixed with '^', so that the objects in these packs will be
omitted from the resulting pack. The result is that only the objects
filtered out by the first `git pack-objects` command are in the pack
resulting from the second `git pack-objects` command.
As the interactions with kept packs are a bit tricky, a few related
tests are added.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9535ce7337 (pack-objects: add list-objects filtering, 2017-11-21)
taught `git pack-objects` to use `--filter`, but required the use of
`--stdout` since a partial clone mechanism was not yet in place to
handle missing objects. Since then, changes like 9e27beaa23
(promisor-remote: implement promisor_remote_get_direct(), 2019-06-25)
and others added support to dynamically fetch objects that were missing.
Even without a promisor remote, filtering out objects can also be useful
if we can put the filtered out objects in a separate pack, and in this
case it also makes sense for pack-objects to write the packfile directly
to an actual file rather than on stdout.
Remove the `--stdout` requirement when using `--filter`, so that in a
follow-up commit, repack can pass `--filter` to pack-objects to omit
certain objects from the resulting packfile.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"checkout --merge -- path" and "update-index --unresolve path" did
not resurrect conflicted state that was resolved to remove path,
but now they do.
* jc/unresolve-removal:
checkout: allow "checkout -m path" to unmerge removed paths
checkout/restore: add basic tests for --merge
checkout/restore: refuse unmerging paths unless checking out of the index
update-index: remove stale fallback code for "--unresolve"
update-index: use unmerge_index_entry() to support removal
resolve-undo: allow resurrecting conflicted state that resolved to deletion
update-index: do not read HEAD and MERGE_HEAD unconditionally
"git range-diff --notes=foo" compared "log --notes=foo --notes" of
the two ranges, instead of using just the specified notes tree.
* kh/range-diff-notes:
range-diff: treat notes like `log`
"git diff" learned diff.statNameWidth configuration variable, to
give the default width for the name part in the "--stat" output.
* ds/stat-name-width-configuration:
diff --stat: add config option to limit filename width
The soft limit of the first line of the commit message should be
"no more than 50 characters" or "50 characters or less", but not
"less than 50 character".
Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add mailmap support to ref-filter formats which are similar in
pretty. This support is such that the following pretty placeholders are
equivalent to the new ref-filter atoms:
%aN = authorname:mailmap
%cN = committername:mailmap
%aE = authoremail:mailmap
%aL = authoremail:mailmap,localpart
%cE = committeremail:mailmap
%cL = committeremail:mailmap,localpart
Additionally, mailmap can also be used with ":trim" option for email by
doing something like "authoremail:mailmap,trim".
The above also applies for the "tagger" atom, that is,
"taggername:mailmap", "taggeremail:mailmap", "taggeremail:mailmap,trim"
and "taggername:mailmap,localpart".
The functionality of ":trim" and ":localpart" remains the same. That is,
":trim" gives the email, but without the angle brackets and ":localpart"
gives the part of the email before the '@' character (if such a
character is not found then we directly grab everything between the
angle brackets).
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reading revisions from stdin via git-rev-list(1)'s `--stdin` option
then these revisions never honor flags like `--not` which have been
passed on the command line. Thus, an invocation like e.g. `git rev-list
--all --not --stdin` will not treat all revisions read from stdin as
uninteresting. While this behaviour may be surprising to a user, it's
been this way ever since it has been introduced via 42cabc341c (Teach
rev-list an option to read revs from the standard input., 2006-09-05).
With that said, in c40f0b7877 (revision: handle pseudo-opts in `--stdin`
mode, 2023-06-15) we have introduced a new mode to read pseudo opts from
standard input where this behaviour is a lot more confusing. If you pass
`--not` via stdin, it will:
- Influence subsequent revisions or pseudo-options passed on the
command line.
- Influence pseudo-options passed via standard input.
- _Not_ influence normal revisions passed via standard input.
This behaviour is extremely inconsistent and bound to cause confusion.
While it would be nice to retroactively change the behaviour for how
`--not` and `--stdin` behave together, chances are quite high that this
would break existing scripts that expect the current behaviour that has
been around for many years by now. This is thus not really a viable
option to explore to fix the inconsistency.
Instead, we change the behaviour of how pseudo-opts read via standard
input influence the flags such that the effect is fully localized. With
this change, when reading `--not` via standard input, it will:
- _Not_ influence subsequent revisions or pseudo-options passed on
the command line, which is a change in behaviour.
- Influence pseudo-options passed via standard input.
- Influence normal revisions passed via standard input, which is a
change in behaviour.
Thus, all flags read via standard input are fully self-contained to that
standard input, only.
While this is a breaking change as well, the behaviour has only been
recently introduced with Git v2.42.0. Furthermore, the current behaviour
can be regarded as a simple bug. With that in mind it feels like the
right thing to retroactively change it and make the behaviour sane.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reported-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git update-index" learns "--show-index-version" to inspect
the index format version used by the on-disk index file.
* jc/update-index-show-index-version:
test-tool: retire "index-version"
update-index: add --show-index-version
update-index doc: v4 is OK with JGit and libgit2
While git show accepts options that apply to the git diff-tree command,
some options do not make sense in the context of git show.
The options of git show are handled using the machinery of git log.
The git log manual page is a better place to look into than git diff-tree
for options that are not in the git show manual page.
Signed-off-by: Han Young <hanyang.tony@bytedance.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, `range-diff` shows the default notes if no notes-related
arguments are given. This is also how `log` behaves. But unlike
`range-diff`, `log` does *not* show the default notes if
`--notes=<custom>` are given. In other words, this:
git log --notes=custom
is equivalent to this:
git log --no-notes --notes=custom
While:
git range-diff --notes=custom
acts like this:
git log --notes --notes-custom
This can’t be how the user expects `range-diff` to behave given that the
man page for `range-diff` under `--[no-]notes[=<ref>]` says:
> This flag is passed to the `git log` program (see git-log(1)) that
> generates the patches.
This behavior also affects `format-patch` since it uses `range-diff` for
the cover letter. Unlike `log`, though, `format-patch` is not supposed
to show the default notes if no notes-related arguments are given.[1]
But this promise is broken when the range-diff happens to have something
to say about the changes to the default notes, since that will be shown
in the cover letter.
Remedy this by introducing `--show-notes-by-default` that `range-diff` can
use to tell the `log` subprocess what to do.
§ Authors
• Fix by Johannes
• Tests by Kristoffer
† 1: See e.g. 66b2ed09c2 (Fix "log" family not to be too agressive about
showing notes, 2010-01-20).
Co-authored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new configuration option diff.statNameWidth=<width> that is equivalent
to the command-line option --stat-name-width=<width>, but it is ignored
by format-patch. This follows the logic established by the already
existing configuration option diff.statGraphWidth=<width>.
Limiting the widths of names and graphs in the --stat output makes sense
for interactive work on wide terminals with many columns, hence the support
for these configuration options. They don't affect format-patch because
it already adheres to the traditional 80-column standard.
Update the documentation and add more tests to cover new configuration
option diff.statNameWidth=<width>. While there, perform a few minor code
and whitespace cleanups here and there, as spotted.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `--type=<type>` was added as a prefered alias for `--<type>` by
fb0dc3bac1 (builtin/config.c: support `--type=<type>` as preferred
alias for `--<type>`), the explanation for the path type was
reworded. Whereas the previous explanation said "expand a leading
`~`" this was changed to "adding a leading `~`". Change "adding" to
"expanding" to correctly explain the canonicalization.
Signed-off-by: Evan Gates <evan.gates@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
References from description of the `--patch` option in various
manual pages have been simplified and improved.
* so/diff-doc-for-patch-update:
doc/diff-options: fix link to generating patch section
The default log message created by "git revert", when reverting a
commit that records a revert, has been tweaked.
* ob/revert-of-revert-is-reapply:
git-revert.txt: add discussion
sequencer: beautify subject of reverts of reverts
"git log --format" has been taught the %(decorate) placeholder.
* ak/pretty-decorate-more:
decorate: use commit color for HEAD arrow
pretty: add pointer and tag options to %(decorate)
pretty: add %(decorate[:<options>]) format
decorate: color each token separately
decorate: avoid some unnecessary color overhead
decorate: refactor format_decorations()
pretty-formats: enclose options in angle brackets
pretty-formats: define "literal formatting code"
We now limit depth of the tree objects and maximum length of
pathnames recorded in tree objects.
* jk/tree-name-and-depth-limit:
lower core.maxTreeDepth default to 2048
tree-diff: respect max_allowed_tree_depth
list-objects: respect max_allowed_tree_depth
read_tree(): respect max_allowed_tree_depth
traverse_trees(): respect max_allowed_tree_depth
add core.maxTreeDepth config
fsck: detect very large tree pathnames
tree-walk: rename "error" variable
tree-walk: drop MAX_TRAVERSE_TREES macro
tree-walk: reduce stack size for recursive functions
"git update-index --index-version N" is used to set the index format
version to a specific version, but there was no way to query the
current version used in the on-disk index file.
Teach the command a new "--show-index-version" option, and also
teach the "--index-version N" option to report what the version was
when run with the "--verbose" option.
Helped-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
