Recently the Git for Windows project started the upgrade process to
a MSYS2 runtime version based on Cygwin v3.x.
This has the very notable consequence that `$(uname -r)` no longer
reports a version starting with "2", but a version with "3".
That breaks our build, as df5218b4c3 (config.mak.uname: support MSys2,
2016-01-13) simply did not expect the version reported by `uname -r` to
depend on the underlying Cygwin version: it expected the reported
version to match the "2" in "MSYS2".
So let's invert that test case to test for *anything else* than a
version starting with "1" (for MSys). That should safeguard us for the
future, even if Cygwin ends up releasing versionsl like 314.272.65536.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Technically, the scripted version set ORIG_HEAD only in two spots (which
really could have been one, because it called `git checkout $onto^0` to
start the rebase and also if it could take a shortcut, and in both cases
it called `git update-ref $orig_head`).
Practically, it *implicitly* reset ORIG_HEAD whenever `git reset --hard`
was called.
However, what we really want is that it is set exactly once, at the
beginning of the rebase.
So let's do that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The ORIG_HEAD pseudo ref is supposed to refer to the original,
pre-rebase state after a successful rebase. Let's add a regression test
to prove that this regressed: With GIT_TEST_REBASE_USE_BUILTIN=false,
this test case passes, with GIT_TEST_REBASE_USE_BUILTIN=true (or unset),
it fails.
Reported by Nazri Ramliy.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In the case that the rebase boils down to a fast-forward, the built-in
rebase reset the working tree twice: once to start the rebase at `onto`,
then realizing that the original (pre-rebase) HEAD was an ancestor and
we basically already fast-forwarded to the post-rebase HEAD,
`reset_head()` was called to update the original ref and to point HEAD
back to it.
That second `reset_head()` call does not need to touch the working tree,
though, as it does not change the actual tip commit (and therefore the
working tree should stay unchanged anyway): only the ref needs to be
updated (because the rebase detached the HEAD, and we want to go back to
the branch on which the rebase was started).
But that second `reset_head()` was called without the flag to leave the
working tree alone (the reason: when that call was introduced, that flag
was not yet even thought of). Let's avoid that unnecessary work by
passing that flag.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The default SIGPIPE behavior can be useful for a command that generates
a lot of output: if the receiver of our output goes away, we'll be
notified asynchronously to stop generating it (typically by killing the
program).
But for a command like fetch, which is primarily concerned with
receiving data and writing it to disk, an unexpected SIGPIPE can be
awkward. We're already checking the return value of all of our write()
calls, and dying due to the signal takes away our chance to gracefully
handle the error.
On Linux, we wouldn't generally see SIGPIPE at all during fetch. If the
other side of the network connection hangs up, we'll see ECONNRESET. But
on OS X, we get a SIGPIPE, and the process is killed. This causes t5570
to racily fail, as we sometimes die by signal (instead of the expected
die() call) when the server side hangs up.
Let's ignore SIGPIPE during the network portion of the fetch, which will
cause our write() to return EPIPE, giving us consistent behavior across
platforms.
This fixes the test flakiness, but note that it stops short of fixing
the larger problem. The server side hit a fatal error, sent us an "ERR"
packet, and then hung up. We notice the failure because we're trying to
write to a closed socket. But by dying immediately, we never actually
read the ERR packet and report its content to the user. This is a (racy)
problem on all platforms. So this patch lays the groundwork from which
that problem might be fixed consistently, but it doesn't actually fix
it.
Note the placement of the SIGPIPE handling. The absolute minimal change
would be to ignore SIGPIPE only when we're writing. But twiddling the
signal handler for each write call is inefficient and maintenance
burden. On the opposite end of the spectrum, we could simply declare
that fetch does not need SIGPIPE handling, since it doesn't generate a
lot of output, and we could just ignore it at the start of cmd_fetch().
This patch takes a middle ground. It ignores SIGPIPE during the network
operation (which is admittedly most of the program, since the actual
network operations are all done under the hood by the transport code).
So it's still pretty coarse.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_or_die() function has one quirk that a caller might not
expect: when it sees EPIPE from the write() call, it translates that
into a death by SIGPIPE. This doesn't change the overall behavior (the
program exits either way), but it does potentially confuse test scripts
looking for a non-signal exit code.
Let's switch away from using write_or_die() in a few code paths, which
will give us more consistent exit codes. It also gives us the
opportunity to write more descriptive error messages, since we have
context that write_or_die() does not.
Note that this won't do much by itself, since we'd typically be killed
by SIGPIPE before write_or_die() even gets a chance to do its thing.
That will be addressed in the next patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In d85b0dff72 (Makefile: use `find` to determine static header
dependencies, 2014-08-25), we switched from a static list of header
files to a dynamically-generated one, asking `find` to enumerate them.
Back in those days, we did not use `$(LIB_H)` by default, and many a
`make` implementation seems smart enough not to run that `find` command
in that case, so it was deemed okay to run `find` for special targets
requiring this macro.
However, as of ebb7baf02f (Makefile: add a hdr-check target,
2018-09-19), $(LIB_H) is part of a global rule and therefore must be
expanded. Meaning: this `find` command has to be run upon every
`make` invocation. In the presence of many a worktree, this can tax the
developers' patience quite a bit.
Even in the absence of worktrees or other untracked files and
directories, the cost of I/O to generate that list of header files is
simply a lot larger than a simple `git ls-files` call.
Therefore, just like in 335339758c (Makefile: ask "ls-files" to list
source files if available, 2011-10-18), we now prefer to use `git
ls-files` to enumerate the header files to enumerating them via `find`,
falling back to the latter if the former failed (which would be the case
e.g. in a worktree that was extracted from a source .tar file rather
than from a clone of Git's sources).
This has one notable consequence: we no longer include `command-list.h`
in `LIB_H`, as it is a generated file, not a tracked one, but that is
easily worked around. Of the three sites that use `LIB_H`, two
(`LOCALIZED_C` and `CHK_HDRS`) already handle generated headers
separately. In the third, the computed-dependency fallback, we can just
add in a reference to $(GENERATED_H).
Likewise, we no longer include not-yet-tracked header files in `LIB_H`.
Given the speed improvements, these consequences seem a comparably small
price to pay.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In 1cadad6f65 (git clone <url> C:\cygwin\home\USER\repo' is working
(again), 2018-12-15), we introduced a new source file, containing
utility functions on Windows. But we forgot to adjust the MSVC section.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, symbolic links have a type: a "file symlink" must point at
a file, and a "directory symlink" must point at a directory. If the
type of symlink does not match its target, it doesn't work.
Git does not record the type of symlink in the index or in a tree. On
checkout it'll guess the type, which only works if the target exists
at the time the symlink is created. This may often not be the case,
for example when the link points at a directory inside a submodule.
By specifying `symlink=file` or `symlink=dir` the user can specify what
type of symlink Git should create, so Git doesn't have to rely on
unreliable heuristics.
Signed-off-by: Bert Belder <bertbelder@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This drops the patch that made it already upstream (and Git for Windows
added the line *another* time)...
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, symbolic links actually have a type depending on the target:
it can be a file or a directory.
In certain circumstances, this poses problems, e.g. when a symbolic link
is supposed to point into a submodule that is not checked out, so there
is no way for Git to auto-detect the type.
To help with that, we will add support over the course of the next
commits to specify that symlink type via the Git attributes. This
requires an index_state, though, something that Git for Windows'
`symlink()` replacement cannot know about because the function signature
is defined by the POSIX standard and not ours to change.
So let's introduce a helper function to create symbolic links that
*does* know about the index_state.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Since `git_check_attr()` implicitly depends on the index, we really
should redo this in a manner that has a chance of going into upstream:
by introducing an index-aware helper function to create symbolic links,
and to override that in a Windows-specific manner instead.
In preparation for this, let's drop the original commit for now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
