This helper is slightly more performant than the script with MSYS2's
Bash. And a lot more readable.
To accommodate t1050, which wants to compare files weighing in with 3MB
(falling outside of t1050's malloc limit of 1.5MB), we simply lift the
allocation limit by setting the environment variable GIT_ALLOC_LIMIT to
zero when calling the helper.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It is a bit strange, and even undesirable, to require Perl just to run
the test suite even when NO_PERL was set.
This patch does not fix this problem by any stretch of imagination.
However, it fixes *the* Perl invocation that *every single* test script
has to run.
While at it, it makes the source code also more grep'able, as the code
that unsets some, but not all, GIT_* environment variables just became a
*lot* more explicit. And all that while still reducing the total number
of lines.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
BusyBox comes with a ton of applets ("applet" being the identical
concept to Git's "builtins"). And similar to Git's builtins, the applets
can be called via `busybox <command>`, or the BusyBox executable can be
copied/hard-linked to the command name.
The similarities do not end here. Just as with Git's builtins, it is
problematic that BusyBox' hard-linked applets cannot easily be put into
a .zip file: .zip archives have no concept of hard-links and therefore
would store identical copies (and also extract identical copies,
"inflating" the archive unnecessarily).
To counteract that issue, MinGit already ships without hard-linked
copies of the builtins, and the plan is to do the same with BusyBox'
applets: simply ship busybox.exe as single executable, without
hard-linked applets.
To accommodate that, Git is being taught by this commit a very special
trick, exploiting the fact that it is possible to call an executable
with a command-line whose argv[0] is different from the executable's
name: when `sh` is to be spawned, and no `sh` is found in the PATH, but
busybox.exe is, use that executable (with unchanged argv).
Likewise, if any executable to be spawned is not on the PATH, but
busybox.exe is found, parse the output of `busybox.exe --help` to find
out what applets are included, and if the command matches an included
applet name, use busybox.exe to execute it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
To verify that the symlink is resolved correctly, we use the fact that
`git.exe` is a native Win32 program, and that `git.exe config -f <path>`
therefore uses the native symlink resolution.
Signed-off-by: Bert Belder <bertbelder@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With the recent update in efee955 (gpg-interface: check gpg signature
creation status, 2016-06-17), we ask GPG to send all status updates to
stderr, and then catch the stderr in an strbuf.
But GPG might fail, and send error messages to stderr. And we simply
do not show them to the user.
Even worse: this swallows any interactive prompt for a passphrase. And
detaches stderr from the tty so that the passphrase cannot be read.
So while the first problem could be fixed (by printing the captured
stderr upon error), the second problem cannot be easily fixed, and
presents a major regression.
So let's just revert commit efee9553a4.
This fixes https://github.com/git-for-windows/git/issues/871
Cc: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Windows paths are typically limited to MAX_PATH = 260 characters, even
though the underlying NTFS file system supports paths up to 32,767 chars.
This limitation is also evident in Windows Explorer, cmd.exe and many
other applications (including IDEs).
Particularly annoying is that most Windows APIs return bogus error codes
if a relative path only barely exceeds MAX_PATH in conjunction with the
current directory, e.g. ERROR_PATH_NOT_FOUND / ENOENT instead of the
infinitely more helpful ERROR_FILENAME_EXCED_RANGE / ENAMETOOLONG.
Many Windows wide char APIs support longer than MAX_PATH paths through the
file namespace prefix ('\\?\' or '\\?\UNC\') followed by an absolute path.
Notable exceptions include functions dealing with executables and the
current directory (CreateProcess, LoadLibrary, Get/SetCurrentDirectory) as
well as the entire shell API (ShellExecute, SHGetSpecialFolderPath...).
Introduce a handle_long_path function to check the length of a specified
path properly (and fail with ENAMETOOLONG), and to optionally expand long
paths using the '\\?\' file namespace prefix. Short paths will not be
modified, so we don't need to worry about device names (NUL, CON, AUX).
Contrary to MSDN docs, the GetFullPathNameW function doesn't seem to be
limited to MAX_PATH (at least not on Win7), so we can use it to do the
heavy lifting of the conversion (translate '/' to '\', eliminate '.' and
'..', and make an absolute path).
Add long path error checking to xutftowcs_path for APIs with hard MAX_PATH
limit.
Add a new MAX_LONG_PATH constant and xutftowcs_long_path function for APIs
that support long paths.
While improved error checking is always active, long paths support must be
explicitly enabled via 'core.longpaths' option. This is to prevent end
users to shoot themselves in the foot by checking out files that Windows
Explorer, cmd/bash or their favorite IDE cannot handle.
Test suite:
Test the case is when the full pathname length of a dir is close
to 260 (MAX_PATH).
Bug report and an original reproducer by Andrey Rogozhnikov:
https://github.com/msysgit/git/pull/122#issuecomment-43604199
[jes: adjusted test number to avoid conflicts, added support for
chdir(), etc]
Thanks-to: Martin W. Kirst <maki@bitkings.de>
Thanks-to: Doug Kelly <dougk.ff7@gmail.com>
Original-test-by: Andrey Rogozhnikov <rogozhnikov.andrey@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
There is a problem in the way 9ac3f0e5b3 (pack-objects: fix
performance issues on packing large deltas, 2018-07-22) initializes that
mutex in the `packing_data` struct. The problem manifests in a
segmentation fault on Windows, when a mutex (AKA critical section) is
accessed without being initialized. (With pthreads, you apparently do
not really have to initialize them?)
This was reported in https://github.com/git-for-windows/git/issues/1839.
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is retry of #1419.
I added flush_fscache macro to flush cached stats after disk writing
with tests for regression reported in #1438 and #1442.
git checkout checks each file path in sorted order, so cache flushing does not
make performance worse unless we have large number of modified files in
a directory containing many files.
Using chromium repository, I tested `git checkout .` performance when I
delete 10 files in different directories.
With this patch:
TotalSeconds: 4.307272
TotalSeconds: 4.4863595
TotalSeconds: 4.2975562
Avg: 4.36372923333333
Without this patch:
TotalSeconds: 20.9705431
TotalSeconds: 22.4867685
TotalSeconds: 18.8968292
Avg: 20.7847136
I confirmed this patch passed all tests in t/ with core_fscache=1.
Signed-off-by: Takuto Ikuta <tikuta@chromium.org>
This topic branch allows `add -p` and `add -i` with a large number of
files. It is kind of a hack that was never really meant to be
upstreamed. Let's see if we can do better in the built-in `add -p`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch teaches `git clean` to respect NTFS junctions and Unix
bind mounts: it will now stop at those boundaries.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Create unit tests to move a directory. Verify that `git status`
gives the same result with and without FSMonitor enabled.
NEEDSWORK: This test exposes a bug in the untracked-cache on
Windows when FSMonitor is disabled. These are commented out
for the moment.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
This topic branch allows us to specify absolute paths without the drive
prefix e.g. when cloning.
Example:
C:\Users\me> git clone https://github.com/git/git \upstream-git
This will clone into a new directory C:\upstream-git, in line with how
Windows interprets absolute paths.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Create 2x2 test matrix with the untracked-cache and fsmonitor--daemon
features and a series of edits and verify that status output is
identical.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Move FSMonitor config settings to a new `struct fsmonitor_settings`
structure. Add a lazily-loaded pointer to `struct repo_settings`.
Create `fsm_settings__get_*()` getters to lazily look up fsmonitor-
related config settings.
Get rid of the `core_fsmonitor` global variable, and add support for
the new `core.useBuiltinFSMonitor` config setting. Move config code
to lookup the existing `core.fsmonitor` value to `fsmonitor-settings.[ch]`.
The `core_fsmonitor` global variable was used to store the pathname to
the FSMonitor hook and it was used as a boolean to see if FSMonitor
was enabled. This dual usage will lead to confusion when we add
support for a builtin FSMonitor based on IPC, since the builtin
FSMonitor doesn't need the hook pathname.
Replace the boolean usage with an `enum fsmonitor_mode` to represent
the state of FSMonitor. And only set the pathname when in HOOK mode.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Create a stress test to hammer on the fsmonitor daemon.
Create a client-side thread pool of n threads and have
each of them make m requests as fast as they can.
NEEDSWORK: This is just the client-side thread pool and
is useful for interactive testing and experimentation.
We need to add a script test to drive this.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Create some test repos with UTF8 pathnames and verify that
the builtin FSMonitor can watch them. This test is mainly
for Windows where we need to avoid `*A()` routines.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Repeat all of the fsmonitor perf tests using `git fsmonitor--daemon` and
the "Simple IPC" interface.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Confirm that MacOS FS events are reported with a normalized spelling.
APFS (and/or HFS+) is case-insensitive. This means that case-independent
lookups ( [ -d .git ] and [ -d .GIT ] ) should both succeed. But that
doesn't tell us how FS events are reported if we try "rm -rf .git" versus
"rm -rf .GIT". Are the events reported using the on-disk spelling of the
pathname or in the spelling used by the command.
NEEDSWORK: I was only able to test case. It would be nice to add tests
that use different Unicode spellings/normalizations and understand the
differences between APFS and HFS+ in this area. We should confirm that
the spelling of the workdir paths that the daemon sends to clients are
always properly normalized.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Change p7519 to use `test_seq` and `xargs` rather than a `for` loop
to touch thousands of files. This takes minutes off of test runs
on Windows because of process creation overhead.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Teach FSMonitor daemon on Windows to recognize shortname paths as
aliases of normal longname paths. FSMonitor clients, such as `git
status`, should receive the longname spelling of changed files (when
possible).
Sometimes we receive FS events using the shortname, such as when a CMD
shell runs "RENAME GIT~1 FOO" or "RMDIR GIT~1". The FS notification
arrives using whatever combination of long and shortnames were used by
the other process. (Shortnames do seem to be case normalized,
however.)
Use Windows GetLongPathNameW() to try to map the pathname spelling in
the notification event into the normalized longname spelling. (This
can fail if the file/directory is deleted, moved, or renamed, because
we are asking the FS for the mapping in response to the event and
after it has already happened, but we try.)
Special case the shortname spelling of ".git" to avoid under-reporting
these events.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Teach `test-tool.exe chmtime` to ignore errors when setting the mtime
on a directory on Windows.
NEEDSWORK: The Windows version of `utime()` (aka `mingw_utime()`) does
not properly handle directories because it uses `_wopen()`. It should
be converted to using `CreateFileW()` and backup semantics at a minimum.
Since I'm already in the middle of a large patch series, I did not want
to destabilize other callers of `utime()` right now. The problem has
only been observed in the t/perf/p7519 test when the test repo contains
an empty directory on disk.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Do not copy any of the various fsmonitor--daemon files from the .git
directory of the (GIT_PREF_REPO or GIT_PERF_LARGE_REPO) source repo
into the test's trash directory.
When perf tests start, they copy the contents of the source repo into
the test's trash directory. If fsmonitor is running in the source repo,
there may be control files, such as the IPC socket and/or fsmonitor
cookie files. These should not be copied into the test repo.
Unix domain sockets cannot be copied in the manner used by the test
setup, so if present, the test setup fails.
Cookie files are harmless, but we should avoid them.
The builtin fsmonitor keeps all such control files/sockets in
.git/fsmonitor--daemon*, so it is simple to exclude them.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Add the "feature: fsmonitor--daemon" message to the output of
`git version --build-options`.
The builtin FSMonitor is only available on certain platforms and
even then only when certain Makefile flags are enabled, so print
a message in the verbose version output when it is available.
This can be used by test scripts for prereq testing. Granted, tests
could just try `git fsmonitor--daemon status` and look for a 128 exit
code or grep for a "not supported" message on stderr, but this is
rather obscure.
The main advantage is that the feature message will automatically
appear in bug reports and other support requests.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
For some reason, this test case was indented with 4 spaces instead of 1
horizontal tab. The other test cases in the same test script are fine.
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This change enhances `git commit --cleanup=scissors` by detecting
scissors lines ending in either LF (UNIX-style) or CR/LF (DOS-style).
Regression tests are included to specifically test for trailing
comments after a CR/LF-terminated scissors line.
Signed-off-by: Luke Bonanomi <lbonanomi@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The convention in Git project's shell scripts is to have white-space
_before_, but not _after_ the `>` (or `<`).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When we commit the template directory as part of `make vcxproj`, the
`branches/` directory is not actually commited, as it is empty.
Two tests were not prepared for that situation.
This developer tried to get rid of the support for `.git/branches/` a
long time ago, but that effort did not bear fruit, so the best we can do
is work around in these here tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
There is a Win32 API function to resolve symbolic links, and we can use
that instead of resolving them manually. Even better, this function also
resolves NTFS junction points (which are somewhat similar to bind
mounts).
This fixes https://github.com/git-for-windows/git/issues/2481.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Windows' equivalent to "bind mounts", NTFS junction points, can be
unlinked without affecting the mount target. This is clearly what users
expect to happen when they call `git clean -dfx` in a worktree that
contains NTFS junction points: the junction should be removed, and the
target directory of said junction should be left alone (unless it is
inside the worktree).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When specifying an absolute path without a drive prefix, we convert that
path internally. Let's make sure that we handle that case properly, too
;-)
This fixes the command
git clone https://github.com/git-for-windows/git \G4W
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows wants to add `git.exe` to the users' `PATH`, without
cluttering the latter with unnecessary executables such as `wish.exe`.
To that end, it invented the concept of its "Git wrapper", i.e. a tiny
executable located in `C:\Program Files\Git\cmd\git.exe` (originally a
CMD script) whose sole purpose is to set up a couple of environment
variables and then spawn the _actual_ `git.exe` (which nowadays lives in
`C:\Program Files\Git\mingw64\bin\git.exe` for 64-bit, and the obvious
equivalent for 32-bit installations).
Currently, the following environment variables are set unless already
initialized:
- `MSYSTEM`, to make sure that the MSYS2 Bash and the MSYS2 Perl
interpreter behave as expected, and
- `PLINK_PROTOCOL`, to force PuTTY's `plink.exe` to use the SSH
protocol instead of Telnet,
- `PATH`, to make sure that the `bin` folder in the user's home
directory, as well as the `/mingw64/bin` and the `/usr/bin`
directories are included. The trick here is that the `/mingw64/bin/`
and `/usr/bin/` directories are relative to the top-level installation
directory of Git for Windows (which the included Bash interprets as
`/`, i.e. as the MSYS pseudo root directory).
Using the absence of `MSYSTEM` as a tell-tale, we can detect in
`git.exe` whether these environment variables have been initialized
properly. Therefore we can call `C:\Program Files\Git\mingw64\bin\git`
in-place after this change, without having to call Git through the Git
wrapper.
Obviously, above-mentioned directories must be _prepended_ to the `PATH`
variable, otherwise we risk picking up executables from unrelated Git
installations. We do that by constructing the new `PATH` value from
scratch, appending `$HOME/bin` (if `HOME` is set), then the MSYS2 system
directories, and then appending the original `PATH`.
Side note: this modification of the `PATH` variable is independent of
the modification necessary to reach the executables and scripts in
`/mingw64/libexec/git-core/`, i.e. the `GIT_EXEC_PATH`. That
modification is still performed by Git, elsewhere, long after making the
changes described above.
While we _still_ cannot simply hard-link `mingw64\bin\git.exe` to `cmd`
(because the former depends on a couple of `.dll` files that are only in
`mingw64\bin`, i.e. calling `...\cmd\git.exe` would fail to load due to
missing dependencies), at least we can now avoid that extra process of
running the Git wrapper (which then has to wait for the spawned
`git.exe` to finish) by calling `...\mingw64\bin\git.exe` directly, via
its absolute path.
Testing this is in Git's test suite tricky: we set up a "new" MSYS
pseudo-root and copy the `git.exe` file into the appropriate location,
then verify that `MSYSTEM` is set properly, and also that the `PATH` is
modified so that scripts can be found in `$HOME/bin`, `/mingw64/bin/`
and `/usr/bin/`.
This addresses https://github.com/git-for-windows/git/issues/2283
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It seems to be not exactly rare on Windows to install NTFS junction
points (the equivalent of "bind mounts" on Linux/Unix) in worktrees,
e.g. to map some development tools into a subdirectory.
In such a scenario, it is pretty horrible if `git clean -dfx` traverses
into the mapped directory and starts to "clean up".
Let's just not do that. Let's make sure before we traverse into a
directory that it is not a mount point (or junction).
This addresses https://github.com/git-for-windows/git/issues/607
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, there are several categories of absolute paths. One such
category starts with a backslash and is implicitly relative to the
drive associated with the current working directory. Example:
c:
git clone https://github.com/git-for-windows/git \G4W
should clone into C:\G4W.
There is currently a problem with that, in that mingw_mktemp() does not
expect the _wmktemp() function to prefix the absolute path with the
drive prefix, and as a consequence, the resulting path does not fit into
the originally-passed string buffer. The symptom is a "Result too large"
error.
Reported by Juan Carlos Arevalo Baeza.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
