[jes: adusted test number to avoid conflicts, fixed non-portable use of
the 'export' statement]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
If multiple threads access a directory that is not yet in the cache, the
directory will be loaded by each thread. Only one of the results is added
to the cache, all others are leaked. This wastes performance and memory.
On cache miss, add a future object to the cache to indicate that the
directory is currently being loaded. Subsequent threads register themselves
with the future object and wait. When the first thread has loaded the
directory, it replaces the future object with the result and notifies
waiting threads.
Signed-off-by: Karsten Blees <blees@dcon.de>
Checking the work tree status is quite slow on Windows, due to slow lstat
emulation (git calls lstat once for each file in the index). Windows
operating system APIs seem to be much better at scanning the status
of entire directories than checking single files.
Add an lstat implementation that uses a cache for lstat data. Cache misses
read the entire parent directory and add it to the cache. Subsequent lstat
calls for the same directory are served directly from the cache.
Also implement opendir / readdir / closedir so that they create and use
directory listings in the cache.
The cache doesn't track file system changes and doesn't plug into any
modifying file APIs, so it has to be explicitly enabled for git functions
that don't modify the working copy.
Note: in an earlier version of this patch, the cache was always active and
tracked file system changes via ReadDirectoryChangesW. However, this was
much more complex and had negative impact on the performance of modifying
git commands such as 'git checkout'.
Signed-off-by: Karsten Blees <blees@dcon.de>
Add a macro to mark code sections that only read from the file system,
along with a config option and documentation.
This facilitates implementation of relatively simple file system level
caches without the need to synchronize with the file system.
Enable read-only sections for 'git status' and preload_index.
Signed-off-by: Karsten Blees <blees@dcon.de>
Emulating the POSIX lstat API on Windows via GetFileAttributes[Ex] is quite
slow. Windows operating system APIs seem to be much better at scanning the
status of entire directories than checking single files. A caching
implementation may improve performance by bulk-reading entire directories
or reusing data obtained via opendir / readdir.
Make the lstat implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Signed-off-by: Karsten Blees <blees@dcon.de>
Emulating the POSIX dirent API on Windows via FindFirstFile/FindNextFile is
pretty staightforward, however, most of the information provided in the
WIN32_FIND_DATA structure is thrown away in the process. A more
sophisticated implementation may cache this data, e.g. for later reuse in
calls to lstat.
Make the dirent implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Define a base DIR structure with pointers to readdir/closedir that match
the opendir implementation (i.e. similar to vtable pointers in OOP).
Define readdir/closedir so that they call the function pointers in the DIR
structure. This allows to choose the opendir implementation on a
call-by-call basis.
Move the fixed sized dirent.d_name buffer to the dirent-specific DIR
structure, as d_name may be implementation specific (e.g. a caching
implementation may just set d_name to point into the cache instead of
copying the entire file name string).
Signed-off-by: Karsten Blees <blees@dcon.de>
Git for Windows ships with its own Perl interpreter, and insists on
using it, so it will most likely wreak havoc if PERL5LIB is set before
launching Git.
Let's just unset that environment variables when spawning processes.
To make this feature extensible (and overrideable), there is a new
config setting `core.unsetenvvars` that allows specifying a
comma-separated list of names to unset before spawning processes.
Reported by Gabriel Fuhrmann.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In the Git for Windows project, we have ample precendent for config
settings that apply to Windows, and to Windows only.
Let's formalize this concept by introducing a platform_core_config()
function that can be #define'd in a platform-specific manner.
This will allow us to contain platform-specific code better, as the
corresponding variables no longer need to be exported so that they can
be defined in environment.c and be set in config.c
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Empty (length 0) usernames and/or passwords, when saved in the Windows
Credential Manager, come back as null when reading the credential.
One use case for such empty credentials is with NTLM authentication, where
empty username and password instruct libcurl to authenticate using the
credentials of the currently logged-on user (single sign-on).
When locating the relevant credentials, make empty username match null.
When outputting the credentials, handle nulls correctly.
Signed-off-by: Jakub Bereżański <kuba@berezanscy.pl>
Make sure the helper does not crash when blank username and password is
provided. If the helper can save such credentials, it should be able to
read them back.
Signed-off-by: Jakub Bereżański <kuba@berezanscy.pl>
When using remotes (with git-flow especially), the remote reference names
are almost always wordwrapped in the "list references" window because it's
somewhat narrow by default. It's possible to resize it with a mouse,
but it's annoying to have to do this every time, especially on Windows 10,
where the window border seems to be only one (1) pixel wide, thus making
the grabbing of the window border tricky.
Signed-off-by: James J. Raden <james.raden@gmail.com>
Tcl/Tk 8.6 introduced new events for the cursor left/right keys and
apparently changed the behavior of the previous event.
Let's work around that by using the new events when we are running with
Tcl/Tk 8.6 or later.
This fixes https://github.com/git-for-windows/git/issues/495
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows now ships with the new Git icon from git-scm.com. Use that
icon file if it exists instead of the old procedurally drawn one.
This patch was sent upstream but so far no decision on its inclusion was
made, so commit it to our fork.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
On Windows, there are dramatic problems when a command line grows
beyond PATH_MAX, which is restricted to 8191 characters on XP and
later (according to http://support.microsoft.com/kb/830473).
Work around this by just cutting off the command line at that length
(actually, at a space boundary) in the hope that only negative
refs are chucked: gitk will then do unnecessary work, but that is
still better than flashing the gitk window and exiting with exit
status 5 (which no Windows user is able to make sense of).
The first fix caused Tcl to fail to compile the regexp, see msysGit issue
427. Here is another fix without using regexp, and using a more relaxed
command line length limit to fix the original issue 387.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Assumes file names in git tree objects are UTF-8 encoded.
On most unix systems, the system encoding (and thus the TCL system
encoding) will be UTF-8, so file names will be displayed correctly.
On Windows, it is impossible to set the system encoding to UTF-8.
Changing the TCL system encoding (via 'encoding system ...', e.g. in the
startup code) is explicitly discouraged by the TCL docs.
Change gitk functions dealing with file names to always convert
from and to UTF-8.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows 2.x ships with an executable that starts the Git Bash
with all the environment variables and what not properly set up. It is
also adjusted according to the Terminal emulator option chosen when
installing Git for Windows (while `bash.exe --login -i` would always
launch with Windows' default console).
So let's use that executable (usually C:\Program Files\Git\git-bash.exe)
instead of `bash.exe --login -i` if its presence was detected.
This fixes https://github.com/git-for-windows/git/issues/490
Signed-off-by: Thomas Kläger <thomas.klaeger@10a.ch>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Make use of the new environment variable GIT_ASK_YESNO to support the
recently implemented fallback in case unlink, rename or rmdir fail for
files in use on Windows. The added dialog will present a yes/no question
to the the user which will currently be used by the windows compat layer
to let the user retry a failed file operation.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
It is better to state clearly expectations and intentions than to assume
quietly that everybody agrees.
This Code of Conduct is the Open Code of Conduct as per
http://todogroup.org/opencodeofconduct/ (the only modifications are the
adjustments to reflect that there is no "response team" in addition to the
Git for Windows maintainer, and the addition of the link to the Open Code
of Conduct itself).
[Completely revamped, based on the Covenant 1.4 by Brendan Forster]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This feature is still highly experimental and has not even been
contributed to the Git mailing list yet: the feature still needs to be
battle-tested more.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The "2>&1" notation in POSIX shells implies that stderr is redirected to
stdout. Let's special-case this value for the environment variable
GIT_REDIRECT_STDERR to allow writing to the same destination as stdout.
The functionality was suggested by Jeff Hostetler.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, file handles need to be marked inheritable when they need to
be used as standard input/output/error handles for a newly spawned
process. The problem with that, of course, is that the "inheritable" flag
is global and therefore can wreak havoc with highly multi-threaded
applications: other spawned processes will *also* inherit those file
handles, despite having *other* input/output/error handles, and never
close the former handles because they do not know about them.
Let's introduce a set of environment variables (GIT_REDIRECT_STDIN and
friends) that point to files, or even better, named pipes and that are
used by the spawned Git process. This helps work around above-mentioned
issue: those named pipes will be opened in a non-inheritable way upon
startup, and no handles are passed around.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch brings slightly experimental changes supporting Git
for Windows to use BusyBox-w32 to execute its shell scripts as well as
its test suite.
The test suite can be run by installing the test artifacts into a MinGit
that has busybox.exe (and using Git for Windows' SDK's Perl for now, as
the test suite requires Perl even when NO_PERL is set, go figure) by
using the `install-mingit-test-artifacts` Makefile target with the
DESTDIR variable pointing to the top-level directory of the MinGit
installation.
To facilitate running the test suite (without having `make` available,
as `make.exe` is not part of MinGit), this branch brings an experimental
patch to the `test-run-command` helper to run Git's test suite. It is
still very experimental, though: in this developer's tests it seemed
that the `poll()` emulation required for `run_parallel_processes()` to
work sometimes hiccups on Windows, causing infinite "hangs". It is also
possible that BusyBox itself has problems writing to the pipes opened by
`test-run-command` (and merging this branch will help investigate
further). Caveat emptor.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The Makefile target `install-mingit-test-artifacts` simply copies stuff
and things directly into a MinGit directory, including an init.bat
script to set everything up so that the tests can be run in a cmd
window.
Sadly, Git's test suite still relies on a Perl interpreter even if
compiled with NO_PERL=YesPlease. We punt for now, installing a small
script into /usr/bin/perl that hands off to an existing Perl of a Git
for Windows SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In the BusyBox-w32 version that is currently under consideration for
MinGit for Windows (to reduce the .zip size, and to avoid problems with
the MSYS2 runtime), the UTF-16 environment present in Windows is
considered to be authoritative, and the 8-bit version is always in UTF-8
encoding.
As a consequence, the ISO-8859-1 test in t9350-fast-export (which tries
to set GIT_AUTHOR_NAME to a ISO-8859-1 encoded value) *must* fail in
that setup.
So let's detect when it would fail (due to an environment being purely
kept UTF-8 encoded), and skip that test in that case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, the current working directory is pretty much guaranteed to
contain a colon. If we feed that path to CVS, it mistakes it for a
separator between host and port, though.
This has not been a problem so far because Git for Windows uses MSYS2's
Bash using a POSIX emulation layer that also pretends that the current
directory is a Unix path (at least as long as we're in a shell script).
However, that is rather limiting, as Git for Windows also explores other
ports of other Unix shells. One of those is BusyBox-w32's ash, which is
a native port (i.e. *not* using any POSIX emulation layer, and certainly
not emulating Unix paths).
So let's just detect if there is a colon in $PWD and punt in that case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
BusyBox' find implementation does not understand the -ls option, so
let's not use it when we're running inside BusyBox.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows uses MSYS2's Bash to run the test suite, which comes
with benefits but also at a heavy price: on the plus side, MSYS2's
POSIX emulation layer allows us to continue pretending that we are on a
Unix system, e.g. use Unix paths instead of Windows ones, yet this is
bought at a rather noticeable performance penalty.
There *are* some more native ports of Unix shells out there, though,
most notably BusyBox-w32's ash. These native ports do not use any POSIX
emulation layer (or at most a *very* thin one, choosing to avoid
features such as fork() that are expensive to emulate on Windows), and
they use native Windows paths (usually with forward slashes instead of
backslashes, which is perfectly legal in almost all use cases).
And here comes the problem: with a $PWD looking like, say,
C:/git-sdk-64/usr/src/git/t/trash directory.t5813-proto-disable-ssh
Git's test scripts get quite a bit confused, as their assumptions have
been shattered. Not only does this path contain a colon (oh no!), it
also does not start with a slash.
This is a problem e.g. when constructing a URL as t5813 does it:
ssh://remote$PWD. Not only is it impossible to separate the "host" from
the path with a $PWD as above, even prefixing $PWD by a slash won't
work, as /C:/git-sdk-64/... is not a valid path.
As a workaround, detect when $PWD does not start with a slash on
Windows, and simply strip the drive prefix, using an obscure feature of
Windows paths: if an absolute Windows path starts with a slash, it is
implicitly prefixed by the drive prefix of the current directory. As we
are talking about the current directory here, anyway, that strategy
works.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When t5605 tries to verify that files are hardlinked (or that they are
not), it uses the `-links` option of the `find` utility.
BusyBox' implementation does not support that option, and BusyBox-w32's
lstat() does not even report the number of hard links correctly (for
performance reasons).
So let's just switch to a different method that actually works on
Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
While it may seem super convenient to some old Unix hands to simpy
require Perl to be available when running the test suite, this is a
major hassle on Windows, where we want to verify that Perl is not,
actually, required in a NO_PERL build.
As a super ugly workaround, we "install" a script into /usr/bin/perl
reading like this:
#!/bin/sh
# We'd much rather avoid requiring Perl altogether when testing
# an installed Git. Oh well, that's why we cannot have nice
# things.
exec c:/git-sdk-64/usr/bin/perl.exe "$@"
The problem with that is that BusyBox assumes that the #! line in a
script refers to an executable, not to a script. So when it encounters
the line #!/usr/bin/perl in t5532's proxy-get-cmd, it barfs.
Let's help this situation by simply executing the Perl script with the
"interpreter" specified explicitly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
BusyBox' unzip is working pretty well. But Git's tests want to abuse it
to not only extract files, but to convert their line endings on the fly,
too. BusyBox' unzip does not support that, and it would appear that
it would require rather intrusive changes.
So let's just work around this by skipping the test case that uses
`unzip -a` and the subsequent test cases expecting `unzip -a`'s output.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
At some stage, t5003-archive-zip wants to add a file that is not ASCII.
To that end, it uses /bin/sh. But that file may actually not exist (it
is too easy to forget that not all the world is Unix/Linux...)! Besides,
we already have perfectly fine binary files intended for use solely by
the tests. So let's use one of them instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Everybody and their dogs, cats and other pets settled on using unified
diffs. It is a really quaint holdover from a long-gone era that GNU diff
outputs "normal" diff by default.
Yet, t4124 relied on that mode.
This mode is so out of fashion in the meantime, though, that e.g.
BusyBox' diff decided not even to bother to support it. It only supports
unified diffs.
So let's just switch away from "normal" diffs and use unified diffs, as
we really are only interested in the `+` lines.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, it is impossible to create a file whose name contains a
quote character. We already excluded test cases using such files from
running on Windows when git.exe itself was tested.
However, we still had two test cases that try to create such a file, and
redirect stdin from such a file, respectively. This *seems* to work in
Git for Windows' Bash due to an obscure feature inherited from Cygwin:
illegal filename characters are simply mapped into/from a private UTF-8
page. Pure Win32 programs (such as git.exe) *still* cannot work with
those files, of course, but at least Unix shell scripts pretend to be
able to.
This entire strategy breaks down when switching to any Unix shell
lacking support for that private UTF-8 page trick, e.g. BusyBox-w32's
ash. So let's just exclude test cases that test whether the Unix shell
can redirect to/from files with "funny names" those from running on
Windows, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Since c6b0831c9c (docs: warn about possible '=' in clean/smudge filter
process values, 2016-12-03), t0021 writes out a file with quotes in its
name, and MSYS2's path conversion heuristics mistakes that to mean that
we are not talking about a path here.
Therefore, we need to use Windows paths, as the test-helper is a Win32
program that would otherwise have no idea where to look for the file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When running with BusyBox, we will want to avoid calling executables on
the PATH that are implemented in BusyBox itself.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The -W option is only understood by MSYS2 Bash's pwd command. We already
make sure to override `pwd` by `builtin pwd -W` for MINGW, so let's not
double the effort here.
This will also help when switching the shell to another one (such as
BusyBox' ash) whose pwd does *not* understand the -W option.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Traditionally, Git for Windows' SDK uses Bash as its default shell.
However, other Unix shells are available, too. Most notably, the Win32
port of BusyBox comes with `ash` whose `pwd` command already prints
Windows paths as Git for Windows wants them, while there is not even a
`builtin` command.
Therefore, let's be careful not to override `pwd` unless we know that
the `builtin` command is available.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
BusyBox-w32 is a true Win32 application, i.e. it does not come with a
POSIX emulation layer.
That also means that it does *not* use the Unix convention of separating
the entries in the PATH variable using colons, but semicolons.
However, there are also BusyBox ports to Windows which use a POSIX
emulation layer such as Cygwin's or MSYS2's runtime, i.e. using colons
as PATH separators.
As a tell-tale, let's use the presence of semicolons in the PATH
variable: on Unix, it is highly unlikely that it contains semicolons,
and on Windows (without POSIX emulation), it is virtually guaranteed, as
everybody should have both $SYSTEMROOT and $SYSTEMROOT/system32 in their
PATH.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
