Allow recording process ID of the process that holds the lock next
to a lockfile for diagnosis.
* pc/lockfile-pid:
lockfile: add PID file for debugging stale locks
When a lock file is held, it can be helpful to know which process owns
it, especially when debugging stale locks left behind by crashed
processes. Add an optional feature that creates a companion PID file
alongside each lock file, containing the PID of the lock holder.
For a lock file "foo.lock", the PID file is named "foo~pid.lock". The
tilde character is forbidden in refnames and allowed in Windows
filenames, which guarantees no collision with the refs namespace
(e.g., refs "foo" and "foo~pid" cannot both exist). The file contains
a single line in the format "pid <value>" followed by a newline.
The PID file is created when a lock is acquired (if enabled), and
automatically cleaned up when the lock is released (via commit or
rollback). The file is registered as a tempfile so it gets cleaned up
by signal and atexit handlers if the process terminates abnormally.
When a lock conflict occurs, the code checks for an existing PID file
and, if found, uses kill(pid, 0) to determine if the process is still
running. This allows providing context-aware error messages:
Lock is held by process 12345. Wait for it to finish, or remove
the lock file to continue.
Or for a stale lock:
Lock was held by process 12345, which is no longer running.
Remove the stale lock file to continue.
The feature is controlled via core.lockfilePid configuration (boolean).
Defaults to false. When enabled, PID files are created for all lock
operations.
Existing PID files are always read when displaying lock errors,
regardless of the core.lockfilePid setting. This ensures helpful
diagnostics even when the feature was previously enabled and later
disabled.
Signed-off-by: Paulo Casaretto <pcasaretto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous wording:
> Path expansions are made the same way as for `core.excludesFile`.
required one to check the docs for 'core.excludesFile' and from there
the definition of the pathname variable type to understand the path
expansion behaviour of this variable. Instead, just link directly to the
pathname type.
This change is basically the same rewording as was done to
'core.excludesFile' in dca83abd (config: describe 'pathname' value
type, 2016-04-29).
Signed-off-by: Matthew Hughes <matthewhughes934@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both "git apply" and "git diff" learn a new whitespace error class,
"incomplete-line".
* jc/whitespace-incomplete-line:
attr: enable incomplete-line whitespace error for this project
diff: highlight and error out on incomplete lines
apply: check and fix incomplete lines
whitespace: allocate a few more bits and define WS_INCOMPLETE_LINE
apply: revamp the parsing of incomplete lines
diff: update the way rewrite diff handles incomplete lines
diff: call emit_callback ecbdata everywhere
diff: refactor output of incomplete line
diff: keep track of the type of the last line seen
diff: correct suppress_blank_empty hack
diff: emit_line_ws_markup() if/else style fix
whitespace: correct bit assignment comments
Reserve a few more bits in the diff flags word to be used for future
whitespace rules. Add WS_INCOMPLETE_LINE without implementing the
behaviour (yet).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Symlink symref" has been added to the list of things that will
disappear at Git 3.0 boundary.
* ps/symlink-symref-deprecation:
refs/files: deprecate writing symrefs as symbolic links
The "files" backend has the ability to store symbolic refs as symbolic
links, which can be configured via "core.preferSymlinkRefs". This
feature stems back from the early days: the initial implementation of
symbolic refs used symlinks exclusively. The symref format was only
introduced in 9b143c6e15 (Teach update-ref about a symbolic ref stored
in a textfile., 2005-09-25) and made the default in 9f0bb90d16
(core.prefersymlinkrefs: use symlinks for .git/HEAD, 2006-05-02).
This is all about 20 years ago, and there are no known reasons nowadays
why one would want to use symlinks instead of symrefs. Mark the feature
for deprecation in Git 3.0.
Note that this only deprecates _writing_ symrefs as symbolic links.
Reading such symrefs is still supported for now.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure that normal paragraphs in most user-facing docs[1] don’t
use literal blocks. This can easily happen if you try to maintain
indentation in order to continue a block; that might work in
e.g. Markdown variants, but not in AsciiDoc.
The fixes are straightforward, i.e. just deindent the block and maybe
add line continuations. The only exception is git-sparse-checkout(1)
where we also replace indentation used for *intended* literal blocks
with `----`.
† 1: These have not been considered:
• `Documentation/howto/`
• `Documentation/technical/`
• `Documentation/gitprotocol*`
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"core.commentChar=auto" that attempts to dynamically pick a
suitable comment character is non-workable, as it is too much
trouble to support for little benefit, and is marked as deprecated.
* pw/3.0-commentchar-auto-deprecation:
commit: print advice when core.commentString=auto
config: warn on core.commentString=auto
breaking-changes: deprecate support for core.commentString=auto
When "core.commentString" is set to "auto" then "git commit" will
automatically select the comment character ensuring that it is not the
first character on any of the lines in the commit message. This was
introduced by commit 84c9dc2c5a (commit: allow core.commentChar=auto
for character auto selection, 2014-05-17). The motivation seems to be
to avoid commenting out lines from the existing message when amending
a commit that was created with a message from a file.
Unfortunately this feature does not work with:
* commit message templates that contain comments.
* prepare-commit-msg hooks that introduce comments.
* "git commit --cleanup=strip --edit -F <file>" which means that it
is incompatible with
- the "fixup" and "squash" commands of "git rebase -i" as the
comments added by those commands are then treated as part of
the commit message.
- the conflict comments added to the commit message by "git
cherry-pick", "git rebase" etc. as these comments are then
treated as part of the commit message.
It is also ignored by "git notes" when amending a note.
The issues with comments coming from a template, hook or file are a
consequence of the design of this feature and are therefore hard to
fix.
As the costs of this feature outweigh the benefits, deprecate it and
remove it in Git 3.0. If someone comes up with some patches that fix
all the issues in a maintainable way then I'd be happy to see this
change reverted.
The next commits will add a warning and some advice for users on how
they can update their config settings.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In ac33519ddf (mingw: restrict file handle inheritance only on Windows
7 and later, 2019-11-22), I introduced code to safe-guard the
defense-in-depth handling that restricts handles' inheritance so that it
would work with Windows 7, too.
Let's revert this patch: Git for Windows dropped supporting Windows 7 (and
Windows 8) directly after Git for Windows v2.46.2. For full details, see
https://gitforwindows.org/requirements#windows-version.
Actually, on second thought: revert only the part that makes this handle
inheritance restriction logic optional and that suggests to open a bug
report if it fails, but keep the fall-back to try again without said
logic: There have been a few false positives over the past few years
(where the warning was triggered e.g. because Defender was still
accessing a file that Git wanted to overwrite), and the fall-back logic
seems to have helped occasionally in such situations.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a user wishes to disable hooks, then they can do so using the
established pattern of setting 'core.hooksPath' to /dev/null. This is
already tested in t1350-config-hooks-path.sh, but has not previously
been visible in the documentation.
Update the documentation to include this as an option.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We presently use the ".txt" extension for our AsciiDoc files. While not
wrong, most editors do not associate this extension with AsciiDoc,
meaning that contributors don't get automatic editor functionality that
could be useful, such as syntax highlighting and prose linting.
It is much more common to use the ".adoc" extension for AsciiDoc files,
since this helps editors automatically detect files and also allows
various forges to provide rich (HTML-like) rendering. Let's do that
here, renaming all of the files and updating the includes where
relevant. Adjust the various build scripts and makefiles to use the new
extension as well.
Note that this should not result in any user-visible changes to the
documentation.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
