This patch introduces support to set special NTFS attributes that are
interpreted by the Windows Subsystem for Linux as file mode bits, UID
and GID.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Previously, we did not install any handler for Ctrl+C, but now we really
want to because the MSYS2 runtime learned the trick to call the
ConsoleCtrlHandler when Ctrl+C was pressed.
With this, hitting Ctrl+C while `git log` is running will only terminate
the Git process, but not the pager. This finally matches the behavior on
Linux and on macOS.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The TerminateProcess() function does not actually leave the child
processes any chance to perform any cleanup operations. This is bad
insofar as Git itself expects its signal handlers to run.
A symptom is e.g. a left-behind .lock file that would not be left behind
if the same operation was run, say, on Linux.
To remedy this situation, we use an obscure trick: we inject a thread
into the process that needs to be killed and to let that thread run the
ExitProcess() function with the desired exit status. Thanks J Wyman for
describing this trick.
The advantage is that the ExitProcess() function lets the atexit
handlers run. While this is still different from what Git expects (i.e.
running a signal handler), in practice Git sets up signal handlers and
atexit handlers that call the same code to clean up after itself.
In case that the gentle method to terminate the process failed, we still
fall back to calling TerminateProcess(), but in that case we now also
make sure that processes spawned by the spawned process are terminated;
TerminateProcess() does not give the spawned process a chance to do so
itself.
Please note that this change only affects how Git for Windows tries to
terminate processes spawned by Git's own executables. Third-party
software that *calls* Git and wants to terminate it *still* need to make
sure to imitate this gentle method, otherwise this patch will not have
any effect.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The Windows Subsystem for Linux (WSL) version 2 allows to use `chmod` on
NTFS volumes provided that they are mounted with metadata enabled (see
https://devblogs.microsoft.com/commandline/chmod-chown-wsl-improvements/
for details), for example:
$ chmod 0755 /mnt/d/test/a.sh
In order to facilitate better collaboration between the Windows
version of Git and the WSL version of Git, we can make the Windows
version of Git also support reading and writing NTFS file modes
in a manner compatible with WSL.
Since this slightly slows down operations where lots of files are
created (such as an initial checkout), this feature is only enabled when
`core.WSLCompat` is set to true. Note that you also have to set
`core.fileMode=true` in repositories that have been initialized without
enabling WSL compatibility.
There are several ways to enable metadata loading for NTFS volumes
in WSL, one of which is to modify `/etc/wsl.conf` by adding:
```
[automount]
enabled = true
options = "metadata,umask=027,fmask=117"
```
And reboot WSL.
It can also be enabled temporarily by this incantation:
$ sudo umount /mnt/c &&
sudo mount -t drvfs C: /mnt/c -o metadata,uid=1000,gid=1000,umask=22,fmask=111
It's important to note that this modification is compatible with, but
does not depend on WSL. The helper functions in this commit can operate
independently and functions normally on devices where WSL is not
installed or properly configured.
Signed-off-by: xungeng li <xungeng@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
BusyBox comes with a ton of applets ("applet" being the identical
concept to Git's "builtins"). And similar to Git's builtins, the applets
can be called via `busybox <command>`, or the BusyBox executable can be
copied/hard-linked to the command name.
The similarities do not end here. Just as with Git's builtins, it is
problematic that BusyBox' hard-linked applets cannot easily be put into
a .zip file: .zip archives have no concept of hard-links and therefore
would store identical copies (and also extract identical copies,
"inflating" the archive unnecessarily).
To counteract that issue, MinGit already ships without hard-linked
copies of the builtins, and the plan is to do the same with BusyBox'
applets: simply ship busybox.exe as single executable, without
hard-linked applets.
To accommodate that, Git is being taught by this commit a very special
trick, exploiting the fact that it is possible to call an executable
with a command-line whose argv[0] is different from the executable's
name: when `sh` is to be spawned, and no `sh` is found in the PATH, but
busybox.exe is, use that executable (with unchanged argv).
Likewise, if any executable to be spawned is not on the PATH, but
busybox.exe is found, parse the output of `busybox.exe --help` to find
out what applets are included, and if the command matches an included
applet name, use busybox.exe to execute it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
At least on _some_ APFS network shares, Git fails to rename the object
files because they are marked as read-only, because that has the effect
of setting the uchg flag on APFS, which then means the file can't be
renamed or deleted.
To work around that, when a rename failed, and the read-only flag is
set, try to turn it off and on again.
This fixes https://github.com/git-for-windows/git/issues/4482
Signed-off-by: David Lomas <dl3@pale-eds.co.uk>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
The main idea of this patch is that even if we have to look up the
absolute path of the script, if only the basename was specified as
argv[0], then we should use that basename on the command line, too, not
the absolute path.
This patch will also help with the upcoming patch where we automatically
substitute "sh ..." by "busybox sh ..." if "sh" is not in the PATH but
"busybox" is: we will do that by substituting the actual executable, but
still keep prepending "sh" to the command line.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, symbolic links have a type: a "file symlink" must point at
a file, and a "directory symlink" must point at a directory. If the
type of symlink does not match its target, it doesn't work.
Git does not record the type of symlink in the index or in a tree. On
checkout it'll guess the type, which only works if the target exists
at the time the symlink is created. This may often not be the case,
for example when the link points at a directory inside a submodule.
By specifying `symlink=file` or `symlink=dir` the user can specify what
type of symlink Git should create, so Git doesn't have to rely on
unreliable heuristics.
Signed-off-by: Bert Belder <bertbelder@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
... even if they may look like them.
As looking up the target of the "symbolic link" (just to see whether it
starts with `/ContainerMappedDirectories/`) is pretty expensive, we
do it when we can be *really* sure that there is a possibility that this
might be the case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: JiSeop Moon <zcube@zcube.kr>
On Windows, symbolic links actually have a type depending on the target:
it can be a file or a directory.
In certain circumstances, this poses problems, e.g. when a symbolic link
is supposed to point into a submodule that is not checked out, so there
is no way for Git to auto-detect the type.
To help with that, we will add support over the course of the next
commits to specify that symlink type via the Git attributes. This
requires an index_state, though, something that Git for Windows'
`symlink()` replacement cannot know about because the function signature
is defined by the POSIX standard and not ours to change.
So let's introduce a helper function to create symbolic links that
*does* know about the index_state.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In preparation for making this function a bit more complicated (to allow
for special-casing the `ContainerMappedDirectories` in Windows
containers, which look like a symbolic link, but are not), let's move it
out of the header.
Signed-off-by: JiSeop Moon <zcube@zcube.kr>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It is a known issue that a rename() can fail with an "Access denied"
error at times, when copying followed by deleting the original file
works. Let's just fall back to that behavior.
Signed-off-by: JiSeop Moon <zcube@zcube.kr>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This will come in handy in the next commit.
Signed-off-by: JiSeop Moon <zcube@zcube.kr>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When trying to ensure that long paths are handled correctly, we
first normalize absolute paths as we encounter them.
However, if the path is a so-called "drive-less" absolute path, i.e. if
it is relative to the current drive but _does_ start with a directory
separator, we would want the normalized path to be such a drive-less
absolute path, too.
Let's do that, being careful to still include the drive prefix when we
need to go through the `\\?\` dance (because there, the drive prefix is
absolutely required).
This fixes https://github.com/git-for-windows/git/issues/4586.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Windows paths are typically limited to MAX_PATH = 260 characters, even
though the underlying NTFS file system supports paths up to 32,767 chars.
This limitation is also evident in Windows Explorer, cmd.exe and many
other applications (including IDEs).
Particularly annoying is that most Windows APIs return bogus error codes
if a relative path only barely exceeds MAX_PATH in conjunction with the
current directory, e.g. ERROR_PATH_NOT_FOUND / ENOENT instead of the
infinitely more helpful ERROR_FILENAME_EXCED_RANGE / ENAMETOOLONG.
Many Windows wide char APIs support longer than MAX_PATH paths through the
file namespace prefix ('\\?\' or '\\?\UNC\') followed by an absolute path.
Notable exceptions include functions dealing with executables and the
current directory (CreateProcess, LoadLibrary, Get/SetCurrentDirectory) as
well as the entire shell API (ShellExecute, SHGetSpecialFolderPath...).
Introduce a handle_long_path function to check the length of a specified
path properly (and fail with ENAMETOOLONG), and to optionally expand long
paths using the '\\?\' file namespace prefix. Short paths will not be
modified, so we don't need to worry about device names (NUL, CON, AUX).
Contrary to MSDN docs, the GetFullPathNameW function doesn't seem to be
limited to MAX_PATH (at least not on Win7), so we can use it to do the
heavy lifting of the conversion (translate '/' to '\', eliminate '.' and
'..', and make an absolute path).
Add long path error checking to xutftowcs_path for APIs with hard MAX_PATH
limit.
Add a new MAX_LONG_PATH constant and xutftowcs_long_path function for APIs
that support long paths.
While improved error checking is always active, long paths support must be
explicitly enabled via 'core.longpaths' option. This is to prevent end
users from shooting themselves in the foot by checking out files that Windows
Explorer, cmd/bash or their favorite IDE cannot handle.
Test suite:
Test the case is when the full pathname length of a dir is close
to 260 (MAX_PATH).
Bug report and an original reproducer by Andrey Rogozhnikov:
https://github.com/msysgit/git/pull/122#issuecomment-43604199
[jes: adjusted test number to avoid conflicts, added support for
chdir(), etc]
Thanks-to: Martin W. Kirst <maki@bitkings.de>
Thanks-to: Doug Kelly <dougk.ff7@gmail.com>
Original-test-by: Andrey Rogozhnikov <rogozhnikov.andrey@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Josh Soref <jsoref@gmail.com>
When FSCache is active, we can cache the reparse tag and use it directly
to determine whether a path refers to an NTFS junction, without any
additional, costly I/O.
Note: this change only makes a difference with the next commit, which
will make use of the FSCache in `git clean` (contingent on
`core.fscache` set, of course).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The recent change to make fscache thread specific relied on fscache_enable()
being called first from the primary thread before being called in parallel
from worker threads. Make that more robust and protect it with a critical
section to avoid any issues.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Add a macro to mark code sections that only read from the file system,
along with a config option and documentation.
This facilitates implementation of relatively simple file system level
caches without the need to synchronize with the file system.
Enable read-only sections for 'git status' and preload_index.
Signed-off-by: Karsten Blees <blees@dcon.de>
Emulating the POSIX lstat API on Windows via GetFileAttributes[Ex] is quite
slow. Windows operating system APIs seem to be much better at scanning the
status of entire directories than checking single files. A caching
implementation may improve performance by bulk-reading entire directories
or reusing data obtained via opendir / readdir.
Make the lstat implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We will use them in the upcoming "FSCache" patches (to accelerate
sequential lstat() calls).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Another (hopefully clean) PR for showing the error warning about atomic
append on windows after failure on APFS, which returns EBADF not EINVAL.
Signed-off-by: David Lomas <dl3@pale-eds.co.uk>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
The first three commits are rebased versions of those in gitgitgadget/git#1215. These allow the following:
1. Fix `git config --global foo.bar <path>` from allowing the `<path>`. As a bonus, users with a config value starting with `/` will not get a warning about "old-style" paths needing a "`%(prefix)/`".
2. When in WSL, the path starts with `/` so it needs to be interpolated properly. Update the warning to include `%(prefix)/` to get the right value for WSL users. (This is specifically for using Git for Windows from Git Bash, but in a WSL directory.)
3. When using WSL, the ownership check fails and reports an error message. This is noisy, and happens even if the user has marked the path with `safe.directory`. Remove that error message.
This comment has been true for the longest time; The combination of the
two preceding commits made it incorrect, so let's drop that comment.
Signed-off-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We map WSAGetLastError() errors to errno errors in winsock_error_to_errno(),
but the MSVC strerror() implementation only produces "Unknown error" for
most of them. Produce some more meaningful error messages in these
cases.
Our builds for ARM64 link against the newer UCRT strerror() that does know
these errors, so we won't change the strerror() used there.
The wording of the messages is copied from glibc strerror() messages.
Reported-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The winsock2 library provides functions that work on different data
types than file descriptors, therefore we wrap them.
But that is not the only difference: they also do not set `errno` but
expect the callers to enquire about errors via `WSAGetLastError()`.
Let's translate that into appropriate `errno` values whenever the socket
operations fail so that Git's code base does not have to change its
expectations.
This closes https://github.com/git-for-windows/git/issues/2404
Helped-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When running Git for Windows on a remote APFS filesystem, it would
appear that the `mingw_open_append()`/`write()` combination would fail
almost exactly like on some CIFS-mounted shares as had been reported in
https://github.com/git-for-windows/git/issues/2753, albeit with a
different `errno` value.
Let's handle that `errno` value just the same, by suggesting to set
`windows.appendAtomically=false`.
Signed-off-by: David Lomas <dl3@pale-eds.co.uk>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Internally, Git expects the environment variable `HOME` to be set, and
to point to the current user's home directory.
This environment variable is not set by default on Windows, and
therefore Git tries its best to construct one if it finds `HOME` unset.
There are actually two different approaches Git tries: first, it looks
at `HOMEDRIVE`/`HOMEPATH` because this is widely used in corporate
environments with roaming profiles, and a user generally wants their
global Git settings to be in a roaming profile.
Only when `HOMEDRIVE`/`HOMEPATH` is either unset or does not point to a
valid location, Git will fall back to using `USERPROFILE` instead.
However, starting with Windows Vista, for secondary logons and services,
the environment variables `HOMEDRIVE`/`HOMEPATH` point to Windows'
system directory (usually `C:\Windows\system32`).
That is undesirable, and that location is usually write-protected anyway.
So let's verify that the `HOMEDRIVE`/`HOMEPATH` combo does not point to
Windows' system directory before using it, falling back to `USERPROFILE`
if it does.
This fixes git-for-windows#2709
Initial-Path-by: Ivan Pozdeev <vano@mail.mipt.ru>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows wants to add `git.exe` to the users' `PATH`, without
cluttering the latter with unnecessary executables such as `wish.exe`.
To that end, it invented the concept of its "Git wrapper", i.e. a tiny
executable located in `C:\Program Files\Git\cmd\git.exe` (originally a
CMD script) whose sole purpose is to set up a couple of environment
variables and then spawn the _actual_ `git.exe` (which nowadays lives in
`C:\Program Files\Git\mingw64\bin\git.exe` for 64-bit, and the obvious
equivalent for 32-bit installations).
Currently, the following environment variables are set unless already
initialized:
- `MSYSTEM`, to make sure that the MSYS2 Bash and the MSYS2 Perl
interpreter behave as expected, and
- `PLINK_PROTOCOL`, to force PuTTY's `plink.exe` to use the SSH
protocol instead of Telnet,
- `PATH`, to make sure that the `bin` folder in the user's home
directory, as well as the `/mingw64/bin` and the `/usr/bin`
directories are included. The trick here is that the `/mingw64/bin/`
and `/usr/bin/` directories are relative to the top-level installation
directory of Git for Windows (which the included Bash interprets as
`/`, i.e. as the MSYS pseudo root directory).
Using the absence of `MSYSTEM` as a tell-tale, we can detect in
`git.exe` whether these environment variables have been initialized
properly. Therefore we can call `C:\Program Files\Git\mingw64\bin\git`
in-place after this change, without having to call Git through the Git
wrapper.
Obviously, above-mentioned directories must be _prepended_ to the `PATH`
variable, otherwise we risk picking up executables from unrelated Git
installations. We do that by constructing the new `PATH` value from
scratch, appending `$HOME/bin` (if `HOME` is set), then the MSYS2 system
directories, and then appending the original `PATH`.
Side note: this modification of the `PATH` variable is independent of
the modification necessary to reach the executables and scripts in
`/mingw64/libexec/git-core/`, i.e. the `GIT_EXEC_PATH`. That
modification is still performed by Git, elsewhere, long after making the
changes described above.
While we _still_ cannot simply hard-link `mingw64\bin\git.exe` to `cmd`
(because the former depends on a couple of `.dll` files that are only in
`mingw64\bin`, i.e. calling `...\cmd\git.exe` would fail to load due to
missing dependencies), at least we can now avoid that extra process of
running the Git wrapper (which then has to wait for the spawned
`git.exe` to finish) by calling `...\mingw64\bin\git.exe` directly, via
its absolute path.
Testing this is in Git's test suite tricky: we set up a "new" MSYS
pseudo-root and copy the `git.exe` file into the appropriate location,
then verify that `MSYSTEM` is set properly, and also that the `PATH` is
modified so that scripts can be found in `$HOME/bin`, `/mingw64/bin/`
and `/usr/bin/`.
This addresses https://github.com/git-for-windows/git/issues/2283
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A change between versions 2.4.1 and 2.6.0 of the MSYS2 runtime modified
how Cygwin's runtime (and hence Git for Windows' MSYS2 runtime
derivative) handles locales: d16a56306d (Consolidate wctomb/mbtowc calls
for POSIX-1.2008, 2016-07-20).
An unintended side-effect is that "cold-calling" into the POSIX
emulation will start with a locale based on the current code page,
something that Git for Windows is very ill-prepared for, as it expects
to be able to pass a command-line containing non-ASCII characters to the
shell without having those characters munged.
One symptom of this behavior: when `git clone` or `git fetch` shell out
to call `git-upload-pack` with a path that contains non-ASCII
characters, the shell tried to interpret the entire command-line
(including command-line parameters) as executable path, which obviously
must fail.
This fixes https://github.com/git-for-windows/git/issues/1036
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
From the documentation of said setting:
This boolean will enable fsync() when writing object files.
This is a total waste of time and effort on a filesystem that
orders data writes properly, but can be useful for filesystems
that do not use journalling (traditional UNIX filesystems) or
that only journal metadata and not file contents (OS X’s HFS+,
or Linux ext3 with "data=writeback").
The most common file system on Windows (NTFS) does not guarantee that
order, therefore a sudden loss of power (or any other event causing an
unclean shutdown) would cause corrupt files (i.e. files filled with
NULs). Therefore we need to change the default.
Note that the documentation makes it sound as if this causes really bad
performance. In reality, writing loose objects is something that is done
only rarely, and only a handful of files at a time.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Atomic append on windows is only supported on local disk files, and it may
cause errors in other situations, e.g. network file system. If that is the
case, this config option should be used to turn atomic append off.
Co-Authored-By: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: 孙卓识 <sunzhuoshi@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
For Windows builds >= 15063 set $env:TERM to "xterm-256color" instead of
"cygwin" because they have a more capable console system that supports
this. Also set $env:COLORTERM="truecolor" if unset.
$env:TERM is initialized so that ANSI colors in color.c work, see
29a3963484 (Win32: patch Windows environment on startup, 2012-01-15).
See git-for-windows/git#3629 regarding problems caused by always setting
$env:TERM="cygwin".
This is the same heuristic used by the Cygwin runtime.
Signed-off-by: Rafael Kitover <rkitover@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In the case of Git for Windows (say, in a Git Bash window) running in a
Windows Subsystem for Linux (WSL) directory, the GetNamedSecurityInfoW()
call in is_path_owned_By_current_side() returns an error code other than
ERROR_SUCCESS. This is consistent behavior across this boundary.
In these cases, the owner would always be different because the WSL
owner is a different entity than the Windows user.
The change here is to suppress the error message that looks like this:
error: failed to get owner for '//wsl.localhost/...' (1)
Before this change, this warning happens for every Git command,
regardless of whether the directory is marked with safe.directory.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
As reported in https://github.com/newren/git-filter-repo/pull/225, it
looks like 99 bytes is not really sufficient to represent e.g. the full
path to Python when installed via Windows Store (and this path is used
in the hasb bang line when installing scripts via `pip`).
Let's increase it to what is probably the maximum sensible path size:
MAX_PATH. This makes `parse_interpreter()` in line with what
`lookup_prog()` handles.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Vilius Šumskas <vilius@sumskas.eu>
There is a Win32 API function to resolve symbolic links, and we can use
that instead of resolving them manually. Even better, this function also
resolves NTFS junction points (which are somewhat similar to bind
mounts).
This fixes https://github.com/git-for-windows/git/issues/2481.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In 1e64d18 (mingw: do resolve symlinks in `getcwd()`) a problem was
introduced that causes git for Windows to stop working with certain
mapped network drives (in particular, drives that are mapped to
locations with long path names). Error message was "fatal: Unable to
read current working directory: No such file or directory". Present
change fixes this issue as discussed in
https://github.com/git-for-windows/git/issues/2480
Signed-off-by: Bjoern Mueller <bjoernm@gmx.de>
It seems to be not exactly rare on Windows to install NTFS junction
points (the equivalent of "bind mounts" on Linux/Unix) in worktrees,
e.g. to map some development tools into a subdirectory.
In such a scenario, it is pretty horrible if `git clean -dfx` traverses
into the mapped directory and starts to "clean up".
Let's just not do that. Let's make sure before we traverse into a
directory that it is not a mount point (or junction).
This addresses https://github.com/git-for-windows/git/issues/607
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When creating directories via `safe_create_leading_directories()`, we
might encounter an already-existing directory which is not
readable by the current user. To handle that situation, Git's code calls
`stat()` to determine whether we're looking at a directory.
In such a case, `CreateFile()` will fail, though, no matter what, and
consequently `mingw_stat()` will fail, too. But POSIX semantics seem to
still allow `stat()` to go forward.
So let's call `mingw_lstat()` to the rescue if we fail to get a file
handle due to denied permission in `mingw_stat()`, and fill the stat
info that way.
We need to be careful to not allow this to go forward in case that we're
looking at a symbolic link: to resolve the link, we would still have to
create a file handle, and we just found out that we cannot. Therefore,
`stat()` still needs to fail with `EACCES` in that case.
This fixes https://github.com/git-for-windows/git/issues/2531.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
