diff --git a/Arduino_TempHumidPresseCO2TVOC_MQTT.ino b/Arduino_TempHumidPresseCO2TVOC_MQTT.ino
new file mode 100644
index 0000000..26759dc
--- /dev/null
+++ b/Arduino_TempHumidPresseCO2TVOC_MQTT.ino
@@ -0,0 +1,834 @@
+//Libraries for all the various commands
+#include <Adafruit_GFX.h>
+#include <Adafruit_SGP30.h>
+#include <ArduinoMqttClient.h>
+#include <ArduinoOTA.h>
+#include <ESP8266WiFi.h>
+#include <LOLIN_HP303B.h>
+#include <SPI.h>
+//#include <SSD1306Wire.h>
+#include <WEMOS_SHT3X.h>
+#include <Wire.h>
+#include "arduino_secrets.h"
+
+// Your WiFi credentials.
+// Set password to "" for open networks.
+char ssid[] = SECRET_SSID;
+char pass[] = SECRET_PASS;
+
+//Sensor Designation
+//String whoAmI = String("office");
+//String whoAmI = String("bedroom");
+String whoAmI = String("kitchen");
+//String whoAmI = String("livingroom");
+
+WiFiClient wifiClient;
+
+//Global Variables for mqttclient
+MqttClient mqttClient(wifiClient);
+
+const char broker[]   = SECRET_SERVER;
+int        port       = 1883;
+const char username[] = SECRET_USERNAME;
+const char password[] = SECRET_PASSWORD;
+const char tree[]     = "sensors/";
+const char branch[]   = "/arduino";
+const char topic0[]   = "/temp";
+const char topic1[]   = "/humidity";
+const char topic2[]   = "/pressure";
+const char topic3[]   = "/tvoc";
+const char topic4[]   = "/eco2";
+const char topic5[]   = "/batteryvoltage";
+const char topic6[]   = "/batterypercent";
+const char topic7[]   = "/ipaddress";
+
+// Generally, you should use "unsigned long" for variables that hold time
+// The value will quickly become too large for an int to store
+const long interval = 1000;
+unsigned long previousMillis = 0;
+
+//SHT30 address assignment
+SHT3X sht30(0x45);
+
+//Global Variables for SHT30 sensor
+int16_t temperatureAndHumiditySensorReturn;
+float temperatureFahrenheit;
+float percentHumidity;
+
+// HP303B Opject
+LOLIN_HP303B HP303BPressureSensor;
+
+//Global Variables for HP303B sensor
+int16_t pressureSensorReturn;
+int32_t pressurePascal;
+float pressureAtmosphere;
+static int16_t oversampling = 7;
+float paToATM = 101325;
+
+//SGP30 Object
+Adafruit_SGP30 sgp30;
+
+//Global Variables for SGP30 sensor
+int16_t eco2AndTVOCSensorReturn;
+int16_t eco2Baseline = 400;
+int16_t tvocBaseline = 0;
+float eco2Measurement;
+float compensatedECO2Measurement;
+float tvocMeasurement;
+float compensatedTVOCMeasurement;
+
+//Global Variables for Battery Charge Level
+int batteryVoltageRaw = analogRead(A0);
+float batteryVoltageConverted = (float)batteryVoltageRaw * 0.00486;
+float batteryChargeLevel;
+float batteryVoltageMatrix[22][2] = {
+  {4.2,  100},
+  {4.15, 95},
+  {4.11, 90},
+  {4.08, 85},
+  {4.02, 80},
+  {3.98, 75},
+  {3.95, 70},
+  {3.91, 65},
+  {3.87, 60},
+  {3.85, 55},
+  {3.84, 50},
+  {3.82, 45},
+  {3.80, 40},
+  {3.79, 35},
+  {3.77, 30},
+  {3.75, 25},
+  {3.73, 20},
+  {3.71, 15},
+  {3.69, 10},
+  {3.61, 5},
+  {3.27, 0},
+  {0, 0}
+};
+
+//Global Variable for Miliseconds
+uint32_t oneSecondInMicroseconds = 1000000;
+uint32_t oneMinuteInMicroseconds = 60000000;
+uint16_t oneSecondInMiliseconds = 1000;
+uint16_t oneMinuteInMiliseconds = 60000;
+
+//OLED screen pre-setup tasks
+//#define wemosOLED096 GEOMETRY_128_64
+//SSD1306Wire display(0x3c, D2, D1, wemosOLED096);
+//#define wemosOLED066 GEOMETRY_64_48
+//SSD1306Wire display(0x3c, D2, D1, wemosOLED066);
+//#define wemosOLED049 GEOMETRY_64_32
+//SSD1306Wire display(0x3c, D2, D1, wemosOLED049);
+
+//#define NUMFLAKES 10
+//#define XPOS 0
+//#define YPOS 1
+//#define DELTAY 2
+
+void wifiSetup() { //Proceedure for initializing and connecting to a wireless network
+  Serial.println("[*]Starting void wifiSetup...");
+  
+  Serial.println("[i]Setting ESP to be a WiFi-Client ONLY(Prevents network issues)...");
+  WiFi.mode(WIFI_STA);
+  Serial.println("[*]ESP set to WiFi-Client ONLY...");
+
+  Serial.println("[i]Starting WiFi Connection...");
+  WiFi.begin(ssid, pass);
+  Serial.print("[i]Connecting");
+  while (WiFi.status() != WL_CONNECTED) { //Print out connection status
+    delay(500);
+    Serial.print(".");
+  }
+  
+  while (WiFi.waitForConnectResult() != WL_CONNECTED) { //Restart ESP if connection fails
+    Serial.println("Connection Failed! Rebooting...");
+    delay(3000);
+    ESP.restart();
+  }
+  Serial.println("");
+  Serial.println("[i]WiFi Connected!");
+  Serial.print("[i]IPv4 address: ");
+  Serial.println(WiFi.localIP());
+
+  Serial.println("[*]void wifiSetup has completed...");
+}
+
+void arduinoOTASetup() { //proceedure for initializing and setting up Arduino OTA update capabilities
+  Serial.println("[*]Starting void arduinoOTASetup...");
+  // Port defaults to 8266
+  // ArduinoOTA.setPort(8266);
+
+  // Hostname defaults to esp8266-[ChipID]
+  // ArduinoOTA.setHostname("myesp8266");
+
+  // No authentication by default
+  // ArduinoOTA.setPassword("admin");
+
+  // Password can be set with it's md5 value as well
+  // MD5(admin) = 21232f297a57a5a743894a0e4a801fc3
+  // ArduinoOTA.setPasswordHash("21232f297a57a5a743894a0e4a801fc3");
+
+  ArduinoOTA.onStart([]() {
+    String type;
+    if (ArduinoOTA.getCommand() == U_FLASH) {
+      type = "sketch";
+    } else { // U_FS
+      type = "filesystem";
+    }
+    // NOTE: if updating FS this would be the place to unmount FS using FS.end()
+    //display.clear();
+    //display.setFont(ArialMT_Plain_10);
+    //display.setTextAlignment(TEXT_ALIGN_CENTER_BOTH);
+    //display.drawString(display.getWidth()/2, display.getHeight()/2 - 10, "OTA Update");
+    //display.display();
+    Serial.println("[i]Start updating: " + type);
+  });
+  
+  ArduinoOTA.onProgress([](unsigned int progress, unsigned int total) {
+    //display.drawProgressBar(4, 32, 120, 8, progress / (total / 100) );
+    //display.display();
+  });
+  
+  ArduinoOTA.onError([](ota_error_t error) {
+    Serial.printf("[!]OTA Error[%u]: ", error);
+    if (error == OTA_AUTH_ERROR) {
+      Serial.println("Auth Failed!");
+    } else if (error == OTA_BEGIN_ERROR) {
+      Serial.println("Begin Failed!");
+    } else if (error == OTA_CONNECT_ERROR) {
+      Serial.println("Connect Failed!");
+    } else if (error == OTA_RECEIVE_ERROR) {
+      Serial.println("Receive Failed!");
+    } else if (error == OTA_END_ERROR) {
+      Serial.println("End Failed!");
+    }
+  });
+  
+  ArduinoOTA.onEnd([]() {
+    //display.clear();
+    //display.setFont(ArialMT_Plain_10);
+    //display.setTextAlignment(TEXT_ALIGN_CENTER_BOTH);
+    //display.drawString(display.getWidth()/2, display.getHeight()/2, "Restart");
+    //display.display();
+    Serial.println("\nOTA Update End");
+  });
+  
+  ArduinoOTA.begin();
+  Serial.println("[*]void arduinoOTASetup has completed...");
+}
+
+void resetDisplay() { //Clears and sets the default Display Settings
+  Serial.println("[*]Starting void resetDisplay...");
+
+  Serial.println("[i]Clearing Display Buffer...");
+  //display.clear();
+
+  Serial.println("[i]Setting Text Font & Size...");
+  //display.setFont(ArialMT_Plain_10);
+
+  Serial.println("[i]Setting Text Alignment...");
+  //display.setTextAlignment(TEXT_ALIGN_LEFT);
+  
+  Serial.println("[*]void resetDisplay has completed...");
+}
+
+void mqttConnect() {
+  Serial.print("[*]Starting void mqttConnect...");
+
+  mqttClient.setId(String(whoAmI) + "Arduino");
+  mqttClient.setUsernamePassword(username, password);
+
+  Serial.print("My IP is: ");
+  Serial.println(WiFi.localIP());
+
+  Serial.println("[#]Connecting to MQTT broker " + String(broker) + " on port " + String(port) + " ...");
+
+  if (!mqttClient.connect(broker, port)) {
+    Serial.print("[!]MQTT connection failed! Error code = " + String(mqttClient.connectError()) + " ");
+
+    switch (mqttClient.connectError()) {
+      case -2:
+        // MQTT_CONNECTION_REFUSED            -2
+        Serial.println("MQTT_CONNECTION_REFUSED");
+      break;
+      case -1:
+        // MQTT_CONNECTION_TIMEOUT            -1
+        Serial.println("MQTT_CONNECTION_TIMEOUT");
+      break;
+      case 1:
+        // MQTT_UNACCEPTABLE_PROTOCOL_VERSION  1
+        Serial.println("MQTT_UNACCEPTABLE_PROTOCOL_VERSION");
+      break;
+      case 2:
+        // MQTT_IDENTIFIER_REJECTED            2
+        Serial.println("MQTT_IDENTIFIER_REJECTED");
+      break;
+      case 3:
+        // MQTT_SERVER_UNAVAILABLE             3
+        Serial.println("MQTT_SERVER_UNAVAILABLE");
+      break;
+      case 4:
+        // MQTT_BAD_USER_NAME_OR_PASSWORD      4
+        Serial.println("MQTT_BAD_USER_NAME_OR_PASSWORD");
+      break;
+      case 5:
+        // MQTT_NOT_AUTHORIZED                 5
+        Serial.println("MQTT_NOT_AUTHORIZED");
+      break;
+    }
+
+    // add reboot
+    while (1);
+
+  } else {
+
+    Serial.println("[i]Connected to the MQTT broker!");
+    Serial.print("My IP:       ");
+    Serial.println(WiFi.localIP());
+    Serial.println("My clientID: " + String(whoAmI) + "Arduino");
+    Serial.println("Broker IP:   " + String(broker));
+    Serial.println("Broker Port: " + String(port));
+  }
+
+  Serial.println("[*]void mqttConnect has completed...");
+}
+
+void pressureSetup() {
+  Serial.println("[*]Starting void pressureSetup...");
+  
+  Serial.println("[*]Starting HP303B Pressure Sensor...");
+  HP303BPressureSensor.begin();
+  Serial.println("[*]HP303B Pressure Sensor started...");
+
+  Serial.println("[*]Starting single test of HP303B Pressure Sensor...");
+  int32_t temperature;
+  int32_t pressure;
+  int16_t oversampling = 7;
+  int16_t ret;
+
+  //lets the HP303B perform a Single temperature measurement with the last (or standard) configuration
+  //The result will be written to the paramerter temperature
+  //ret = HP303BPressureSensor.measureTempOnce(temperature);
+  //the commented line below does exactly the same as the one above, but you can also config the precision
+  //oversampling can be a value from 0 to 7
+  //the HP303B will perform 2^oversampling internal temperature measurements and combine them to one result with higher precision
+  //measurements with higher precision take more time, consult datasheet for more information
+  ret = HP303BPressureSensor.measureTempOnce(temperature, oversampling);
+
+  if (ret != 0)
+  {
+    //Something went wrong.
+    //Look at the library code for more information about return codes
+    Serial.print("[!]Error! Pressure HP303B returned ret = ");
+    Serial.println(ret);
+  }
+  else
+  {
+    Serial.print("[i]HP303B Temperature: ");
+    Serial.print(temperature);
+    Serial.println(" degrees Celsius");
+  }
+
+  //Pressure measurement behaves like temperature measurement
+  //ret = HP303BPressureSensor.measurePressureOnce(pressure);
+  ret = HP303BPressureSensor.measurePressureOnce(pressure, oversampling);
+  if (ret != 0)
+  {
+    //Something went wrong.
+    //Look at the library code for more information about return codes
+    Serial.print("[!]Error! Pressure HP303B returned ret = ");
+    Serial.println(ret);
+  }
+  else
+  {
+    Serial.print("[i]HP303B Pressure: ");
+    Serial.print(pressure);
+    Serial.println(" Pascal");
+  }
+  delay(500);
+  Serial.println("[i]Quick Test of the HP303B sensor complete...");
+
+  Serial.println("[*]void pressureSetup has completed...");
+}
+
+void airQualitySetup() {
+  Serial.println("[*]Starting void airQualitySetup...");
+  
+  Serial.println("[*]Starting SGP30 Sensor...");
+  if (sgp30.begin())
+  {
+    Serial.println("[*]SGP30 Sensor started...");
+    Serial.println("[i]Setting Calibration Values for SGP30 Sensor(Per LOLIN Documentation)...");
+    sgp30.setIAQBaseline(eco2Baseline, tvocBaseline);
+    Serial.println("[*]Calibration Values for SGP30 Sensor set...");
+  }
+  else {
+    Serial.println("[!]ERROR: SGP Sensor could not start!");
+  }
+  Serial.println("[*]void airQualitySetup has completed...");
+  
+}
+
+void mqttPublish() {
+  Serial.println("[*]Starting void mqttPublish...");
+
+  // Let everyone know what server I am sending data to
+  Serial.println("[i] MQTT - Sending to broker at " + String(broker) + ":" + String(port));
+
+  // Send Temperature Sensor Data
+  Serial.print("[i]MQTT - Sending message to topic: ");
+  Serial.println(tree + String(whoAmI) + branch + topic0);
+  Serial.println("[#]Data: " + String(temperatureFahrenheit));
+  // send message, the Print interface can be used to set the message contents
+  mqttClient.beginMessage(tree + String(whoAmI) + branch + topic0);
+  mqttClient.print(temperatureFahrenheit);
+  mqttClient.endMessage();
+  //
+  Serial.print("[i]MQTT - Message sent to topic: ");
+  Serial.println(tree + String(whoAmI) + branch + topic0);
+
+  // Send Humidity Sensor Data
+  Serial.print("[i]MQTT - Sending message to topic: ");
+  Serial.println(tree + String(whoAmI) + branch + topic1);
+  Serial.println("[#]Data: " + String(percentHumidity));
+  // send message, the Print interface can be used to set the message contents
+  mqttClient.beginMessage(tree + String(whoAmI) + branch + topic1);
+  mqttClient.print(percentHumidity);
+  mqttClient.endMessage();
+  //
+  Serial.print("[i]MQTT - Message sent to topic: ");
+  Serial.println(tree + String(whoAmI) + branch + topic1);
+
+  //Send Pressure Sensor Data
+  Serial.print("[i]MQTT - Sending message to topic: ");
+  Serial.println(tree + String(whoAmI) + branch + topic2);
+  Serial.println("[#]Data: " + String(pressureAtmosphere));
+  // Send message, the Print interface can be used to set the message contents
+  mqttClient.beginMessage(tree + String(whoAmI) + branch + topic2);
+  mqttClient.print(pressureAtmosphere);
+  mqttClient.endMessage();
+  //
+  Serial.print("[i]MQTT - Message sent to topic: ");
+  Serial.println(tree + String(whoAmI) + branch + topic2);
+
+  // Send TVOC Sensor Data
+  Serial.print("[i]MQTT - Sending message to topic: ");
+  Serial.println(tree + String(whoAmI) + branch + topic3);
+  Serial.println("[#]Data: " + String(compensatedTVOCMeasurement));
+  // send message, the Print interface can be used to set the message contents
+  mqttClient.beginMessage(tree + String(whoAmI) + branch + topic3);
+  mqttClient.print(compensatedTVOCMeasurement);
+  mqttClient.endMessage();
+  //
+  Serial.print("[i]MQTT - Message sent to topic: ");
+  Serial.println(tree + String(whoAmI) + branch + topic3);
+
+  // Send eCO2 Sensor Data
+  Serial.print("[i]MQTT - Sending message to topic: ");
+  Serial.println(tree + String(whoAmI) + branch + topic4);
+  Serial.println("[#]Data: " + String(compensatedECO2Measurement));
+  // send message, the Print interface can be used to set the message contents
+  mqttClient.beginMessage(tree + String(whoAmI) + branch + topic4);
+  mqttClient.print(compensatedECO2Measurement);
+  mqttClient.endMessage();
+  //
+  Serial.print("[i]MQTT - Message sent to topic: ");
+  Serial.println(tree + String(whoAmI) + branch + topic4);
+
+  // Send Battery Voltage Data
+  Serial.print("[i]MQTT - Sending message to topic: ");
+  Serial.println(tree + String(whoAmI) + branch + topic5);
+  Serial.println("[#]Data: " + String(batteryVoltageConverted));
+  // send message, the Print interface can be used to set the message contents
+  mqttClient.beginMessage(tree + String(whoAmI) + branch + topic5);
+  mqttClient.print(batteryVoltageConverted);
+  mqttClient.endMessage();
+  //
+  Serial.print("[i]MQTT - Message sent to topic: ");
+  Serial.println(tree + String(whoAmI) + branch + topic5);
+
+  // Send Battery Percent Data
+  Serial.print("[i]MQTT - Sending message to topic: ");
+  Serial.println(tree + String(whoAmI) + branch + topic6);
+  Serial.println("[#]Data: " + String(batteryChargeLevel));
+  // send message, the Print interface can be used to set the message contents
+  mqttClient.beginMessage(tree + String(whoAmI) + branch + topic6);
+  mqttClient.print(batteryChargeLevel);
+  mqttClient.endMessage();
+
+  Serial.print("[i]MQTT - Message sent to topic: ");
+  Serial.println(tree + String(whoAmI) + topic6);
+
+  // Send IP Address Data
+  Serial.print("[i]MQTT - Sending message to topic: ");
+  Serial.println(tree + String(whoAmI) + branch + topic7);
+  Serial.print("[#]Data: ");
+  Serial.println(WiFi.localIP());
+  // send message, the Print interface can be used to set the message contents
+  mqttClient.beginMessage(tree + String(whoAmI) + branch + topic7);
+  mqttClient.print(WiFi.localIP());
+  mqttClient.endMessage();
+
+  Serial.print("[i]MQTT - Message sent to topic: ");
+  Serial.println(tree + String(whoAmI) + topic6);
+
+  Serial.println("[*]void mqttPublish has completed...");
+}
+
+void updateTemperature() {
+  Serial.println("[*]Starting void updateTemperature...");
+
+  int16_t updatedTemperatureAndHumiditySensorReturn;
+
+  Serial.println("[?]Updating status of SHT3X Sensor...");
+
+  Serial.println("[#]SHT3X Sensor previously returned: " + String(temperatureAndHumiditySensorReturn));
+  
+  updatedTemperatureAndHumiditySensorReturn = sht30.get();
+  temperatureAndHumiditySensorReturn = updatedTemperatureAndHumiditySensorReturn;
+
+  Serial.println("[#]SHT3X Sensor now returned: " + String(updatedTemperatureAndHumiditySensorReturn));
+
+  Serial.println("[i]SHT3X Sensor Status updated...");
+  
+  if (temperatureAndHumiditySensorReturn == 0) {
+    Serial.println("[i]SHT3X Sensor Started...");
+    Serial.println("[*]Updating Temperature...");
+    Serial.println("[#]Temperature was: " + String(temperatureFahrenheit) + "°F");
+    temperatureFahrenheit = sht30.fTemp;
+    Serial.println("[#]Temperature is now: " + String(temperatureFahrenheit) + "°F");
+  }
+  else if (temperatureAndHumiditySensorReturn == 2) {
+    //display.println("SHT3x Busy!");
+    Serial.println("[!]Error! Wire Busy! Wire.available() != 0...");
+  }
+  else {
+    //display.println("SHT3x No Data!");
+    Serial.println("[!]Error! No information recieved from the SHT3x Sensor!");
+  }
+  Serial.println("[*]void updateTemperature has completed...");
+}
+
+void updateHumidity() {
+  Serial.println("[*]Starting void updateHumidity...");
+
+  int16_t updatedTemperatureAndHumiditySensorReturn;
+
+  Serial.println("[?]Updating status of SHT3X Sensor...");
+
+  Serial.println("[#]SHT3X Sensor previously returned: " + String(temperatureAndHumiditySensorReturn));
+
+  updatedTemperatureAndHumiditySensorReturn = sht30.get();
+  temperatureAndHumiditySensorReturn = updatedTemperatureAndHumiditySensorReturn;
+
+  Serial.println("[#]SHT3X Sensor now returned: " + String(updatedTemperatureAndHumiditySensorReturn));
+
+  Serial.println("[i]SHT3X Sensor Status updated...");
+  
+  if (temperatureAndHumiditySensorReturn == 0) {
+    Serial.println("[i]SHT3X Sensor Online...");
+    Serial.println("[*]Updating Humidity...");
+    Serial.println("[#]Humidity was: " + String(percentHumidity) + "%");
+    percentHumidity = sht30.humidity;
+    Serial.println("[#]Humidity is now: " + String(percentHumidity) + "%");
+  }
+  else if (temperatureAndHumiditySensorReturn == 2) {
+    //display.println("SHT3x Busy!");
+    Serial.println("[!]Error! Wire Busy! Wire.available() != 0...");
+  }
+  else
+  {
+    //display.println("SHT3x No Data!");
+    Serial.println("[!]Error! No information recieved from the SHT3x Sensor!");
+  }
+  Serial.println("[*]void updateHumidity has completed...");
+}
+
+void updatePressure() {
+  Serial.println("[*]Starting void updatePressure...");
+
+  int32_t updatedPressurePascal;
+  int16_t updatedPressureSensorReturn;
+  
+  Serial.println("[?]Updating status of HP303B Sensor...");
+
+  Serial.println("[#]HP303B Sensor previously returned: " + String(pressureSensorReturn));
+
+  updatedPressureSensorReturn = HP303BPressureSensor.measurePressureOnce(pressurePascal, oversampling);
+  pressureSensorReturn = updatedPressureSensorReturn;
+
+  Serial.println("[#]HP303B Sensor now returned: " + String(updatedPressureSensorReturn));
+
+  Serial.println("[i]HP303B Sensor Status updated...");
+  
+  if (pressureSensorReturn == 0) { //HP303B__SUCCEEDED
+    Serial.println("[*]Updating Pressure...");
+
+    Serial.println("[#]Pressure was: " + String(pressureAtmosphere) + " Atmospheres");
+    pressureAtmosphere = (pressurePascal / paToATM);
+    Serial.println("[#]Pressure is now: " + String(pressureAtmosphere) + " Atmospheres");
+  }
+  else if (pressureSensorReturn == -1) { //HP303B__FAIL_UNKNOWN
+    //display.println("HP303B -1!");
+    Serial.println("[!]ERROR! HP303B Sensor returned with an unknown failure! pressureSensorReturn = -1, HP303B__FAIL_UNKNOWN...");
+  }
+  else if (pressureSensorReturn == -2) { //HP303B__FAIL_INIT_FAILED
+    //display.println("HP303B -2!");
+    Serial.println("[!]ERROR! HP303B Sensor returned with an initialization failure! pressureSensorReturn = -2, HP303B__FAIL_INIT_FAILED...");
+  }
+  else if (pressureSensorReturn == -3) { //HP303B__FAIL_TOOBUSY
+    //display.println("HP303B -3!");
+    Serial.println("[!]ERROR! HP303B Sensor returned with a busy response! pressureSensorReturn = -3, HP303B__FAIL_TOOBUSY...");
+  }
+  else if (pressureSensorReturn == -4) { //HP303B__FAIL_UNFINISHED
+    //display.println("HP303B -4!");
+    Serial.println("[!]ERROR! HP303B Sensor returned with an unfinisehd response! pressureSensorReturn = -4, HP303B__FAIL_UNFINISHED...");
+  }
+  else {
+    //display.println("HP303B No Data!");
+    Serial.println("[!]Error! HP303B Sensor returned an unknown response!");
+  }
+  Serial.println("[*]void updatePressure has completed...");
+}
+
+void updateECO2Measurement() {
+  Serial.println("[*]Starting void updateECO2Measurement...");
+  //CO2: 400 ppm  TVOC: 0 ppb
+  Serial.println("[?]Updating status of SGP30 Sensor...");
+
+  Serial.println("[#]SGP30 Sensor previously returned: " + String(eco2AndTVOCSensorReturn));
+
+  eco2AndTVOCSensorReturn = sgp30.IAQmeasure();
+
+  Serial.println("[#]SGP30 Sensor now returned: " + String(eco2AndTVOCSensorReturn));
+  
+  if (eco2AndTVOCSensorReturn == 1) { //Successfully talked to sensor
+    Serial.println("[*]Updating eCO2...");
+    Serial.println("[#]eCO2 was: " + String(compensatedECO2Measurement) + " ppm");
+    eco2Measurement = sgp30.eCO2;
+    compensatedECO2Measurement = eco2Measurement - eco2Baseline;
+    Serial.println("[#]eCO2 is now: " + String(compensatedECO2Measurement) + " ppm");
+  }
+  else { //Failed to talk to sensor
+    //display.println("SGP30 retunred 0!");
+    Serial.println("[!]ERROR! No information recieved from the SGP30 Sensor!");
+  }
+}
+
+void updateTVOCMeasurement() {
+  Serial.println("[*]Starting void updateTVOCMeasurement...");
+  //CO2: 400 ppm  TVOC: 0 ppb
+  Serial.println("[?]Updating status of SGP30 Sensor...");
+
+  Serial.println("[#]SGP30 Sensor previously returned: " + String(eco2AndTVOCSensorReturn));
+
+  eco2AndTVOCSensorReturn = sgp30.IAQmeasure();
+
+  Serial.println("[#]SGP30 Sensor now returned: " + String(eco2AndTVOCSensorReturn));
+  
+  if (eco2AndTVOCSensorReturn == 1) { //Successfully talked to sensor
+    Serial.println("[*]Updating TVOC...");
+    Serial.println("[#]TVOC was: " + String(compensatedTVOCMeasurement) + " ppb");
+    tvocMeasurement = sgp30.TVOC;
+    compensatedTVOCMeasurement = tvocMeasurement - tvocBaseline;
+    Serial.println("[#]TVOC is now: " + String(compensatedTVOCMeasurement) + " ppb");
+  }
+  else { //Failed to talk to sensor
+    //display.println("SGP30 returned 0!");
+    Serial.println("[!]ERROR! Something went wrong with the SGP30 Sensor!");
+  }
+}
+
+void updateBatteryStatus() {
+  Serial.println("[*]Starting void updateBatteryStatus...");
+  
+  Serial.println("[?]Updating status of the Battery...");
+  Serial.println("[#]Battery Voltage was: " + String(batteryVoltageConverted));
+  Serial.println("[#]Battery Charge Level was: " + String(batteryChargeLevel));
+  batteryVoltageRaw = analogRead(A0);
+  batteryVoltageConverted = (float)batteryVoltageRaw * 0.00486;
+  for(int i = 20; i>=0; i--) {
+    if(batteryVoltageMatrix[i][0] >= batteryVoltageConverted) {
+      batteryChargeLevel = batteryVoltageMatrix[i + 1][1];
+      break;
+    }
+  }
+  Serial.println("[#]Battery Voltage is now: " + String(batteryVoltageConverted));
+  Serial.println("[#]Battery Charge Level is now: " + String(batteryChargeLevel));
+}
+
+// void displayLoop() {
+//   Serial.println("[*]Starting void displayLoop...");
+
+//   Serial.println("[*]Setting Display Properties...");
+//   display.resetDisplay();
+//   Serial.println("[i]Display Properties Set");
+
+//   Serial.println("[*}Building Display Output...");
+  
+//   if (temperatureAndHumiditySensorReturn == 0) {
+//     Serial.println("[*]Building the Temperature(*F) Display Output...");
+//     display.print("Temp:");
+//     Serial.println("Temperature:");
+//     display.println(String(temperatureFahrenheit, 2) + "F");
+//     Serial.println(String(temperatureFahrenheit, 2) + "F");
+    
+//     Serial.println("[*]Building the Humidity(%) Display Output...");
+//     display.print("Humid:");
+//     Serial.println("Relative Humidity:");
+//     display.println(String(percentHumidity, 2) + "%");
+//     Serial.println(String(percentHumidity, 2) + "%");
+//     }
+//     else {
+//       display.print("Temp:");
+//       display.println("[!]");
+      
+//       display.print("Humid:");
+//       display.println("[!]");
+      
+//       Serial.println("[!]ERROR! No data recieved from SHT30!");
+//     }
+
+//   if (pressureSensorReturn == 0) {
+//     Serial.println("[*]Building the Pressure(atm) Display Output...");
+//     display.print("Press:");
+//     Serial.println("Pressure:");
+//     display.println(String(pressureAtmosphere, 2) + "atm");
+//     Serial.println(String(pressureAtmosphere, 2) + "atm");
+//     }
+//     else {
+//       display.print("Press:");
+//       display.println("[!]");
+      
+//       Serial.println("[!]ERROR! No data recieved from HP303B!");
+//     }
+
+//    if (eco2AndTVOCSensorReturn == 0) {
+//     Serial.println("[*]Building the eCO2 Display Output...");
+//     display.print("eCO2:");
+//     Serial.println("eCO2:");
+//     display.println(String(eco2Measurement, 2) + "ppm");
+//     Serial.println(String(eco2Measurement, 2) + "ppm");
+
+//     Serial.println("[*]Building the TVOC Display Output...");
+//     display.print("TVOC:");
+//     Serial.println("TVOC:");
+//     display.println(String(tvocMeasurement, 2) + "ppb");
+//     Serial.println(String(tvocMeasurement, 2) + "ppb");
+//     }
+//     else {
+//       display.print("eCO2:");
+//       display.println("[!]");
+
+//       display.print("TVOC:");
+//       display.println("[!]");
+      
+//       Serial.println("[!]ERROR! No data recieved from SGP30!");
+//    }
+
+//   if (batteryVoltageConverted != 0) {
+//     Serial.println("[*]Building the Battery Level/Voltage Display Output...");
+//     display.print("Battery:");
+//     Serial.println("Battery:");
+//     display.println(String(batteryChargeLevel, 2) + "% " + String(batteryVoltageConverted, 2) + "V");
+//     Serial.println(String(batteryChargeLevel, 2) + "% " + String(batteryVoltageConverted, 2) + "V");
+//     }
+//     else {
+//       display.print("Battery:");
+//       display.println("[!]");
+//       Serial.println("[!]ERROR! Battery at 0V! It may be completely dead or disconnected!");
+//     }
+  
+//   Serial.println("[i]Display Output Built. Displaying now...");
+//   display.display();
+//   Serial.println("[i]Displaying for 10 seconds...");
+//   delay(10 * oneSecondInMiliseconds);
+  
+//   Serial.println("[i]Display Output Displayed. Clearing Display Output...");
+//   display.resetDisplay();
+//   Serial.println("[i]Display Output Cleared...");
+  
+//   Serial.println("[*]void displayLoop has completed...");
+// }
+
+void setup() {
+  Serial.begin(9600);
+  
+  Serial.println("[!]Booting...");
+
+  // by default, we'll generate the high voltage from the 3.3v line internally! (neat!)
+  //Serial.println("[*]Initializing Display I2C...");
+  //display.init();
+  //Serial.println("[i]Display I2C Initialization Complete...");
+  
+  // Show image buffer on the display hardware.
+  // Since the buffer is intialized with an Adafruit splashscreen
+  // internally, this will display the splashscreen.
+  //Serial.println("[*]Displaying Adafruit Splashscreen...");
+  //display.display();
+  //delay(2 * oneSecondInMiliseconds);
+
+  // Clear the buffer.
+  // Serial.println("[*]Clearing the Display Buffer...");
+  // display.resetDisplay();
+  // Serial.println("[i]Display Buffer cleared...");
+
+  //Start WIFI connection
+  Serial.println("[*]SETUP - Starting WIFI...");
+  wifiSetup();
+  Serial.println("[*]SETUP - WIFI Start Complete...");
+
+  //Run mqttConnect
+  Serial.println("[*]SETUP - Starting MQTT Connect...");
+  mqttConnect();
+  Serial.println("[*]SETUP - MQTT Connect Start Complete...");
+
+  //Run Arduino OTA Setup
+  Serial.println("[*]SETUP - Starting Arduino OTA...");
+  arduinoOTASetup();
+  Serial.println("[*]SETUP - Arduino OTA Start Complete...");
+
+  //Run Pressure Sensor Startup
+  Serial.println("[*]SETUP - Starting Pressure Sensor...");
+  pressureSetup();
+  Serial.println("[*]SETUP - Pressure Sensor Start Complete...");
+
+  //Run Air Quality Sensor Startup
+  Serial.println("[*]SETUP - Starting Air Quality Sensor...");
+  airQualitySetup();
+  Serial.println("[*]SETUP - Air Quality Sensor Start Complete...");
+
+  //Handle Android OTA
+  ArduinoOTA.handle();
+
+  Serial.println("[i]All Start Jobs Complete[i]");
+}
+
+void loop() {
+
+  // print IP for tracking
+  Serial.print("My IP is: ");
+  Serial.println(WiFi.localIP());
+
+  // handle an OTA upgrades
+  ArduinoOTA.handle();
+
+  // poll MQTT to keep alive
+  mqttClient.poll();
+  // update current time for MQTT
+  unsigned long currentMillis = millis();
+
+  if (currentMillis - previousMillis >= interval) {
+    // save the last time a message was sent
+    previousMillis = currentMillis;
+  
+    updateTemperature();
+    updateHumidity();
+    updatePressure();
+    updateECO2Measurement();
+    updateTVOCMeasurement();
+    updateBatteryStatus();
+    //displayLoop();
+    mqttPublish();
+  }
+}